SNI 07-3695-1995 Test methods of maximum hardness in weld heat effected zone《热焊区域最大硬度测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4379-1989 b型长方推板毛坯.pdf

HB 4381-1989 套筒扳手组件.pdf

HB 4384-1989 带r橡皮.pdf

HB 4389-1989 加工钛合金、高温合金MJ螺纹螺栓用滚丝轮.54型.d=3～39mm.P=0.5～2mm.pdf

HB 4390-1989 加工钛合金、高温合金MJ螺纹螺栓用滚丝轮.45型.d=3～8mm.P=0.5～1mm.pdf

HB 4391-1989 加工钛合金、高温合金MJ螺纹螺栓用滚丝轮.技术条件.pdf

HB 4392-1989 外六方扳手 s＝1．5~10.pdf

HB 4401-1990 冷冲模滚动导向铸铁模架 后导柱铸铁模架.pdf

HB 4402-1990 冷冲模滚动导向铸铁模架 中间导柱铸铁模架.pdf