TCVN 7408-2004 Foodstuffs Detection of irradiated food containing fat Gas chromatographic analysis of hydrocarbons《食品 经过辐射含脂肪的食品的检测 碳氢化合物的气相色谱分析》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 3159A-2008 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HD DRILLED CLOSE TOLERANCE SHANK TI ALLOY UNS R56400 160 KSI MIN 3750-24 UNJF-3A《UNS R56400、160 KSI MIN 3750-24 UNJF-3.pdf

SAE AS 3163A-2016 NUT PLAIN - O D SLOTS KEY WASHER LOCKED LOW ALLOY STEEL (SAE 8740) AS8879.pdf

SAE AS 3166-1975 UNION TUBE - CRES AMS 5646 CONICAL END CONNECTOR《CRES AMS 5646、圆锥端、连接管接头》.pdf

SAE AS 3167A-2015 Bolt Machine - Double Hex Extended Washer Head Close Tolerance Shank AMS 5643 190-32 UNJF-3A.pdf

SAE AS 3170A-2013 BOLT MACHINE - DOUBLE HEX EXTENDED WASHER HEAD CLOSE TOLERANCE SHANK AMS5643 (UNS S17400) 3750-24 UNJF-3A《机械螺栓 AMS5643 (UNS S17400) 紧公差柄 双精度六角形延展垫圈头 3750-24 UNJF-.pdf

SAE AS 3171A-2013 BOLT MACHINE - DOUBLE HEX EXTENDED WASHER HEAD CLOSE TOLERANCE SHANK AMS5643 4375-20 UNJF-3A《机制螺栓 4375-20 UNJF-3A AMS5643 (UNS S17400) 紧公差柄的双六角延伸的垫圈头》.pdf

SAE AS 3172A-1976 Bolt Machine - Double Hex Extended Washer Head Close Tolerance Shank AMS 5643 500-20 UNJF-3A.pdf

SAE AS 3173A-2013 BOLT MACHINE - DOUBLE HEX EXTENDED WASHER HEAD CLOSE TOLERANCE SHANK AMS5643 (UNS S17400) 140 KSI 5625-18 UNJF-3A《机制螺栓 5625-18 UNJF-3A 140 KSI AMS5643 (UNS S17400.pdf

SAE AS 3174A-2014 BOLT MACHINE - DOUBLE HEX EXTENDED WASHER HEAD DRILLED CLOSE TOL SHANK AMS5643 (UNS S17400) 140 KSI 1900-32 UNJF-3A《机制螺栓 1900-32 UNJF-3A 140 KSI AMS5643 (UNS S174.pdf