2019年春八年级数学下册第17章函数及其图象17.4反比例函数第1课时反比例函数的图象与性质练习(新版)华东师大版.doc

上传人:visitstep340 文档编号:1217281 上传时间:2019-06-05 格式:DOC 页数:4 大小:1.33MB
下载 相关 举报
2019年春八年级数学下册第17章函数及其图象17.4反比例函数第1课时反比例函数的图象与性质练习(新版)华东师大版.doc_第1页
第1页 / 共4页
2019年春八年级数学下册第17章函数及其图象17.4反比例函数第1课时反比例函数的图象与性质练习(新版)华东师大版.doc_第2页
第2页 / 共4页
2019年春八年级数学下册第17章函数及其图象17.4反比例函数第1课时反比例函数的图象与性质练习(新版)华东师大版.doc_第3页
第3页 / 共4页
2019年春八年级数学下册第17章函数及其图象17.4反比例函数第1课时反比例函数的图象与性质练习(新版)华东师大版.doc_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、12.反比例函数的图象和性质第 1 课时 反比例函数的图象与性质1.如图,过反比例函数 y= (x0)的图象上一点 A 作 ABx 轴于点 B,连结 AO,若 SAOB =2,则k 的值为( C )(A)2 (B)3(C)4 (D)52.在函数 y= (a 为常数 )的图象上有三点(-3,y 1),(-1,y2),(2,y3),则函数值21y1,y2,y3的大小关系是( D )(A)y23 时,y 的取值范围是 0 时,双曲线的两个分支在第一、三象限内;当 m y2,指出点 P,Q 各位于哪 个象限?并简要说明 理由.解:(1)由题意 B(-2, ),把 B(-2, )代入 y= 中,得到 k

2、3,所以反比例函数的表达式为 y=- .(2)结论:P 在第二象限,Q 在第四象限.理由:因为 k=-3y2,所以 P,Q 在不同的象限,所以 P 在第二象限,Q 在第四象限.310.(数形结合题)如图为反比例函数 y= 和 y= (k1k2)在第一象限内的图象,直线 MNx轴,分别交两条曲线于 M 和 N,若 SMON =3,求 k2-k1的值.解:设 直线 MN 交 y 轴于 P,POM 的面积为 S1,PON 的面积为 S2,MON 的面积为 S3,由 S2-S1=S3,得 k2- k1=3,所以 k2-k1=6.11.(拓展探究题)已知函数 y=(m-2) 为反比例函数.(1)求 m 的值;(2)它的图象在第几象限内?在各象限内,y 随 x 的增大如何变化?(3)当-3x- 时,求此函数的最大值和最小值.解:(1 )由反比例函数的定义可知32=1,20. 解得 m=-2.(2)因为 k=-2-2=-40,所以反比例函数的图象 在第二、四象限内,在各象限内,y 随 x 的增大而增大.(3)因为在每个象限内,y 随 x 的增大而增大,所以当 x=- 时,y 最大值 =- =8;当 x=-3 时,y 最小值 =- = .所以当-3x- 时,此函数的最大值为 8,最小值为 .4

展开阅读全文
相关资源
猜你喜欢
  • GOST 13107-1979 Devices for speech reception and transmission Methods of measuring acoustic noeses《语言接收和传输装置 噪声测量方法》.pdf GOST 13107-1979 Devices for speech reception and transmission Methods of measuring acoustic noeses《语言接收和传输装置 噪声测量方法》.pdf
  • GOST 13110-1983 Sheet stamping dies Lower plates-blanks for dies with diagonally positioned guide assemblies Construction and dimensions《带对角导柱和衬套的板材冲模用下料板 结构及尺寸》.pdf GOST 13110-1983 Sheet stamping dies Lower plates-blanks for dies with diagonally positioned guide assemblies Construction and dimensions《带对角导柱和衬套的板材冲模用下料板 结构及尺寸》.pdf
  • GOST 13111-1983 Sheet stamping dies Upper plastic-blanks for dies with diagonally positioned guide assemdlies Design and dimensions《带对角导柱和衬套的板材冲模用上料板 结构及尺寸》.pdf GOST 13111-1983 Sheet stamping dies Upper plastic-blanks for dies with diagonally positioned guide assemdlies Design and dimensions《带对角导柱和衬套的板材冲模用上料板 结构及尺寸》.pdf
  • GOST 13112-1983 Die bases for cold plastic working dies with guide posts rear located Construction and dimensions《带后导柱和衬套的板材冲模用料板 结构及尺寸》.pdf GOST 13112-1983 Die bases for cold plastic working dies with guide posts rear located Construction and dimensions《带后导柱和衬套的板材冲模用料板 结构及尺寸》.pdf
  • GOST 13113-1983 Die bases for cold plastic working dies with guide posts located on central line Construction and dimensions《带中间导柱和衬套的板材冲模用料板 结构及尺寸》.pdf GOST 13113-1983 Die bases for cold plastic working dies with guide posts located on central line Construction and dimensions《带中间导柱和衬套的板材冲模用料板 结构及尺寸》.pdf
  • GOST 13114-1975 Die plate without shelves for cold plastic working dies Construction and dimensions《板材冲模用无托架料板 结构及尺寸》.pdf GOST 13114-1975 Die plate without shelves for cold plastic working dies Construction and dimensions《板材冲模用无托架料板 结构及尺寸》.pdf
  • GOST 13115-1975 Die plates with shelves located along the width of cold plastic working dies Construction and dimensions《板材冲模用宽向带托架料的板 结构及尺寸》.pdf GOST 13115-1975 Die plates with shelves located along the width of cold plastic working dies Construction and dimensions《板材冲模用宽向带托架料的板 结构及尺寸》.pdf
  • GOST 13116-1975 Die plates with shelves located along the length of the die plate for cold plastic working dies Construction and dimensions《板材冲模用长向带托架的料板 结构及尺寸》.pdf GOST 13116-1975 Die plates with shelves located along the length of the die plate for cold plastic working dies Construction and dimensions《板材冲模用长向带托架的料板 结构及尺寸》.pdf
  • GOST 13118-1983 Guide posts smooth for cold plastic working dies Construction and dimensions《低温塑料加工模用导柱 结构和尺寸规格》.pdf GOST 13118-1983 Guide posts smooth for cold plastic working dies Construction and dimensions《低温塑料加工模用导柱 结构和尺寸规格》.pdf
  • 相关搜索

    当前位置:首页 > 考试资料 > 中学考试

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1