1、IEEE Standard Test Procedures for Electric Energy Storage Equipment and Systems for Electric Power Systems ApplicationsIEEE Std 2030.3-2016Sponsored by the IEEE Standards Coordinating Committee 21 on Fuel Cells, Photovoltaics, Dispersed Generation, and Energy StorageIEEE3 Park AvenueNew York, NY 100
2、16-5997USAIEEE Std 2030.3-2016IEEE Standard Test Procedures for Electric Energy Storage Equipment and Systems for Electric Power Systems ApplicationsSponsor IEEE Standards Coordinating Committee 21 on Fuel Cells, Photovoltaics, Dispersed Generation, and Energy Storage Approved 30 June 2016IEEE-SA St
3、andards BoardAbstract: Applications of electric energy storage equipment and systems (ESS) for electric power systems (EPSs) are covered. Testing items and procedures, including type test, production test, installation evaluation, commissioning test at site, and periodic test, are provided in order
4、to verify whether ESS applied in EPSs meet the safety and reliability requirements of the EPS. Grid opera-tors, ESS manufactures, and ESS operators are for whom this standard is established.Keywords: commissioning test, electric energy storage equipment, electric energy storage systems, electric pow
5、er systems, IEEE 2030.3, installation evaluation, periodic test, production test, test procedure, type testThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2016 by The Institute of Electrical and Electronics Engineers, Inc. All rights re
6、served. Published 30 September 2016. Printed in the United States of America.IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all cond
7、itions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide
8、other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard.In publishing and ma
9、king its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon hi
10、s or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri-ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
11、 EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE-MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CON-TRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWIS
12、E) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.TranslationsThe IEEE consensus development process involves the review of documents in English only. In the eve
13、nt that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.4Copyright 2016 IEEE. All rights reserved.Official statementsA statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operation
14、s Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standard
15、s shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE.Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE.
16、 However, IEEE does not provide consulting information or advice pertain-ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned in
17、terests, it is important that any responses to comments and questions also receive the concur-rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi-nating Committees are not able to provide an instant response to comments or questions except in
18、those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to
19、 the following address:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854 USALaws and regulationsUsers of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any appli
20、cable regulatory require-ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be
21、construed as doing so.CopyrightsIEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and
22、use in private self-regulation, standardization, and the pro-motion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.PhotocopiesSubject to payment of th
23、e appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer
24、Ser-vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.5Copyright 2016 IEEE. All rights reserved.Updating of IEEE Standards documentsUs
25、ers of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri-genda, or errata. An official IEEE document at any point in time consists of the current ed
26、ition of the document together with any amendments, corrigenda, or errata then in effect.Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its contents, although st
27、ill of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendm
28、ents, corrigenda, or errata, visit the IEEE-SA Website at http:/www.ieee.org/publica-tions_standards/index.html or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org.Errat
29、aErrata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.PatentsAttention is called to the possibility that implementation of this standard
30、may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accep
31、ted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rate
32、s, with reasonable terms and conditions that are demonstrably free of any unfair discrim-ination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re-sponsible for identifying Essential Patent Claim
33、s for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-d
34、iscriminatory. Users of this standard are expressly advised that determination of the valid-ity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6Copyright 2016 IEEE. All r
35、ights reserved.ParticipantsAt the time this draft standard was completed, the working group of Test Procedures for Equipment Interconnecting Electric Energy Storage with Electric Power Systems had the following membership:Yiming Hou, ChairXi Xiao, SecretaryChengwei DaiYi HanJinghan HeYu JiRui LiYang
36、 LiCaihao LiangHuishi LiangHaitao LiuZhipeng LvWenyuan MaZanxiang NieJian SuXisheng TangXiaojun WangMing WuZhenggang YinHui YuDongxia ZhangThe following members of the entity balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention.Beijing Jiaoton
37、g UniversityBeijing Sifang Automation Co., LtdBII Group Holdings Ltd.China Datang CorporationHuawei Technologies Co., LtdInstitute of Electrical Engineering Chinese Academy of SciencesNorth China Electric Power UniversityRockwell AutomationSouthwest Jiaotong UniversityState Grid Corporation of China
38、 (SGCC)Tianjin UniversityTsinghua UniversityWhen the IEEE-SA Standards Board approved this standard on 30 June 2016, it had the following membership:Jean-Philippe Faure, ChairTed Burse, Vice ChairJohn D. Kulick, Past ChairKonstantinos Karachalios, SecretaryChuck AdamsMasayuki AriyoshiStephen DukesJi
39、anbin FanJ. Travis GriffithGary HoffmanRonald W. HotchkissMichael JanezicJoseph L. Koepfinger*Hung LingKevin LuAnnette D. ReillyGary RobinsonMehmet UlemaYingli WenHoward WolfmanDon WrightYu YuanDaidi Zhong*Member Emeritus7Copyright 2016 IEEE. All rights reserved.IntroductionThis introduction is not
40、part of IEEE Std 2030.32016, IEEE Standard Test Procedures for Electric Energy Storage Equipment and Systems for Electric Power Systems Applications.Energy storage equipment and systems (ESS) that connect to an electric power system (EPS) shall meet the requirements specified in related IEEE standar
41、ds. Standardized test procedures are necessary to establish and verify compliance with those requirements. These test procedures need to provide both repeatable results, at independent test locations, and have flexibility to accommodate the variety of storage technologies and applications.This guide
42、 is comprised of 10 clauses and two annexes. The main content includes type tests, production tests, installation evaluations, commissioning tests at site, and periodic tests.Despite the fact that ESS applied in an EPS are at discharging state (acting as power sources) or at charging state (acting a
43、s load), ESS shall comply with the planning and operation requirements of the grid. This stan-dard aims to provide the test items and procedures for the ESS applied in EPSs to verify whether the relevant characteristic parameters of the integrated ESS are in accordance with the technical requirement
44、s of the EPSs.8Copyright 2016 IEEE. All rights reserved.ContentsOverview 101.1 Scope 101.2 Purpose . 112. Normative references 113. Definitions .123.1 Definitions 123.2 Acronyms and abbreviations 124. General 134.1 Testing items .134.2 Application .135. General technical requirements .155.1 Accuracy
45、 of the test result .155.2 Test environment 155.3 Accuracy and calibration of the instruments for test .155.4 Equipment information.155.5 Test report .165.6 Technical requirement of the test system 166. Type tests .166.1 Temperature stability test 176.2 State of charge (SOC) test .186.3 Conversion e
46、fficiency test 216.4 Response time test 266.5 Ramp-rate test.286.6 Synchronization test .296.7 Reconnection after abnormal condition test .306.8 Harmonics test 356.9 Flicker test 366.10 Voltage unbalance test 366.11 Open-phase test 386.12 Overcurrent test 396.13 DC injection test .396.14 Response to
47、 abnormal voltage condition 396.15 Response to abnormal frequency condition 476.16 Unintentional islanding test 506.17 Low-voltage ride through test (LVRT test) .516.18 Interconnection integrity test 546.19 Test record 557. Production test . 557.1 Insulation test of paralleling equipment 557.2 Synch
48、ronization test . 567.3 Continuous operation test . 567.4 Reconnection after abnormal condition test . 567.5 Response to abnormal voltage condition test 577.6 Response to abnormal frequency condition test587.7 Overcurrent test 587.8 Unintentional islanding test 587.9 Low-voltage ride through test .5
49、99Copyright 2016 IEEE. All rights reserved.7.10 Test record 598. Installation evaluation .598.1 Operation environment conditions .598.2 Grounding 608.3 Isolation device.608.4 Monitoring608.5 Fault response .608.6 Coordination with EPS reclosing 609. Commissioning test .609.1 General requirements .609.2 Calibration and inspection 619.3 Supplemented type test and production test at site 619.4 Insulation test of paralleling equipment 619.5 Synchronization test . 629.6 Unintentional islanding test 629.7 Stop charging/discharging test 629.8 Parameters adjustment 6310. Periodi
