MNOSZ 8789-1955 《工业假性铬》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 2397-1978 Hydraulic pneumatic and lubricating systems Tee end passage tube connections with cut ring for Pn 40MN m2 (~400Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 P.pdf

TCVN 2398-1978 Hydraulic pneumatic and lubricating systems Tee and reduce tube connections with cut ring for Pn 40MN m2 (~400Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn.pdf

TCVN 2399-1978 Hydraulic pneumatic and lubricating systems Tee end passage asymetric tube connections with cut ring for Pn 40MN m2 (~400Kgf cm2) Construction and basic dimensions《液.pdf

TCVN 2401-1978 Hydraulic pneumatic and lubricating systems Cross passage tube connections with cut ring for 40MN m2 (~400 Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn为40.pdf

TCVN 2402-1978 Hydraulic pneumatic and lubricating systems Cross reduce tube connections with cut ring for 40 MN m2 (~400 Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn为40.pdf

TCVN 2403-1978 Hydraulic pneumatic and lubricating systems Cross passage end tube connections with cut ring for Pn 40MN m2 (~400 Kgf cm2) Construction and basic dimensions《液压气动和润滑系.pdf

TCVN 2404-1978 Hydraulic pneumatic and lubricating systems Tube connections partition unions for 40MN m2 (~400Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn为40MN m(~400Kgf.pdf

TCVN 2405-1978 Hydraulic pneumatic and lubricating systems Dead tube connections for Pn 40MN m2 (~400Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn为40MN m(~400Kgf cm)的封闭管接.pdf

TCVN 2406-1978 Tube connections for hydraulic pneumatic and lubrication Passageunions for Pn 40 MN m2 (~400 Kgf cm2) Construction and basic dimensions 《液压气动和润滑管接头 Pn为40MN m(~400Kgf.pdf