1、ANSI/INCITS/ISO 19134-2007ISO 19134:2007, IDT) Geographic information Location-based services Multimodal routing and navigationANSI/INCITS/ISO 19134-2007(ISO 19134:2007, IDT)Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or netwo
2、rking permitted without license from IHS-,-,-ANSI/INCITS/ISO 19134-2007 ii ITIC 2007 All rights reserved PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are
3、embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorpora
4、ted. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a
5、problem relating to it is found, please inform the Central Secretariat at the address given below. Adopted by INCITS (InterNational Committee for Information Technology Standards) as an American National Standard. Date of ANSI Approval: 4/13/2007 Published by American National Standards Institute, 2
6、5 West 43rd Street, New York, New York 10036 Copyright 2007 by Information Technology Industry Council (ITI). All rights reserved. These materials are subject to copyright claims of International Standardization Organization (ISO), International Electrotechnical Commission (IEC), American National S
7、tandards Institute (ANSI), and Information Technology Industry Council (ITI). Not for resale. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of ITI. All requests pertaining to this standard should be submitted
8、 to ITI, 1250 Eye Street NW, Washington, DC 20005. Printed in the United States of America Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-iiiContents Page Foreword iv Introduct
9、ion v 1 Scope . 1 2 Conformance. 1 3 Normative references . 1 4 Terms and definitions. 1 5 Symbols and abbreviated terms . 4 5.1 Acronyms 4 5.2 UML Notation. 4 5.3 Package abbreviations. 4 6 Multimodal LBS for routing and navigation.5 6.1 Semantics 5 6.2 Multimodal Network 5 6.3 Multimodal Routing 1
10、8 6.4 Multimodal Constraint and Advisory 24 6.5 Multimodal Navigation Service 26 6.6 Multimodal Cost Function 29 Annex A (normative) Abstract test suite 31 Annex B (informative) Multimodal Cost Functions for routing and navigation. 33 Bibliography . 38 ANSI/INCITS/ISO 19134-2007 ITIC 2007 All rights
11、 reservedCopyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bod
12、ies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organization
13、s, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the I
14、SO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the
15、 member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 19134 was prepared by Technical Committee ISO/TC 211, Geographic i
16、nformation/Geomatics. ANSI/INCITS/ISO 19134-2007 ITIC 2007 All rights reservedCopyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-vIntroduction In everyday life in metropolitan area
17、s in the world, a typical traveller is involved in using various modes of transportation for daily activities: e.g. walking, driving, park-and-ride, mass transit and taxi. The traveller frequently faces the problem of finding the optimal or best route combining several modes, from the origin to the
18、destination, passing through the locations (waypoints) where the traveller might want to engage in activities such as shopping and meeting people, possibly satisfying a set of constraints such as the sequence constraints like “activity 1 before activity 2”, “location 1 before location 2”, etc. A typ
19、ical intercity traveller faces situations requiring decisions to be made such as which station (junction) and by which mode to travel in order to take which system among the available transportation modes between an origin and a destination. The decision will depend on the overall cost that includes
20、 the line-haul, parking, routing, stopping at stations (junctions), stopping at intermediate places, etc. This International Standard provides a conceptual schema for describing the data and services needed to support routing and navigation application for mobile clients who intend to reach a target
21、 position using two or more modes of transportation. This conceptual schema is a standard schema such as the spatial schema (ISO 19107) or the temporal schema (ISO 19108). This International Standard provides a description of a service type to support routing and navigation for a mode that operates
22、either on a fixed route or with a fixed schedule, a description of data type for transfers, and a description of data type for schedule information and route information of a mode with a fixed route and/or schedule. Based upon ISO 19133:2005, this International Standard specifies additional classes
23、as well as extensions to existing classes to be used for multimodal routing and navigation. As in ISO 19133:2005, this International Standard assumes that all requests for services will be encapsulated in a request/response pair between the mobile client and the client application or its on-web prox
24、y application. Therefore, this International Standard describes service operation types and a set of request/response data types associated with some operations which are necessary for multimodal routing and navigation. By way of adding and/or expanding ISO 19133:2005, standardized conceptual schema
25、s for multimodal routing and navigation of mobile clients will increase the ability to share geographic information among multimodal location-based service applications. These schemas will be used by multimodal location-based service applications, mostly in metropolitan areas, and in all intercity t
26、ravelling environments to provide consistently understandable spatial data structures. ANSI/INCITS/ISO 19134-2007 ITIC 2007 All rights reservedCopyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license
27、 from IHS-,-,-Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-AMERICAN NATIONAL STANDARD ANSI/INCITS/ISO 19134-20071Geographic information Location-based services Multimodal rou
28、ting and navigation 1 Scope This International Standard specifies the data types and their associated operations for the implementation of multimodal location-based services for routing and navigation. It is designed to specify web services that may be made available to wireless devices through web-
29、resident proxy applications, but is not limited to that environment. 2 Conformance Conformance to this International Standard depends on the type of entity declaring conformance. Mechanisms for the data exchanges are conformant to this International Standard if they contain record implementations of
30、 the object types described within this International Standard, as specified in A.2. Web services for routing and navigation are conformant to this International Standard if their interfaces implement one or both of the subtypes of service defined in this International Standard, as specified in A.3.
31、 Details of the conformance classes are given in the Abstract test suite in Annex A. 3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of t
32、he referenced document (including any amendments) applies. ISO 19101, Geographic information Reference model ISO 19107, Geographic information Spatial schema ISO 19108, Geographic information Temporal schema ISO 19112, Geographic information Spatial referencing by geographic identifiers ISO 19133:20
33、05, Geographic information Location-based services Tracking and navigation 4 Terms and definitions For the purposes of this document, the following terms and definitions apply. 4.1 application manipulation and processing of data in support of user requirements ISO 19101 ITIC 2007 All rights reserved
34、Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-2 4.2 application schema conceptual schema for data required by one or more applications ISO 19101 4.3 cost function function tha
35、t associates a measure (cost) to a route ISO 19133:2005 NOTE The normal mechanism is to apply a cost to each part of a route, and to define the total route cost as the sum of the cost of the parts. This is necessary for the operation of the most common navigation algorithms. The units of cost functi
36、ons are not limited to monetary costs and values only, but include such measures as time, distance and possibly others. The only requirement is that the function be additive and at least non-negative. This latter criteria can be softened as long as it is not zero or less cost is associated to any lo
37、op in the network, as this will prevent the existence of a “minimal cost” route. 4.4 junction single topological node in a network with its associated collection of turns, and incoming and outgoing links ISO 19133:2005 NOTE Junction is an alias for node. 4.5 link directed topological connection betw
38、een two nodes (junctions), consisting of an edge and a direction ISO 19133:2005 NOTE Link is an alias for directed edge. 4.6 location identifiable geographic place ISO 19112 NOTE A location is represented by one of a set of data types that describes a position, along with metadata about that data, i
39、ncluding coordinates (from a coordinate reference system), a measure (from a linear referencing system), or an address (from an address system) ISO 19133:2005. 4.7 location-based service LBS service whose return or other property is dependent on the location of the client requesting the service or o
40、f some other thing, object or person ISO 19133:2005 4.8 navigation combination of routing, route traversal and tracking ISO 19133:2005 NOTE This is essentially the common term navigation, but the definition decomposes the process in terms used in the packages defined in this International Standard.
41、ANSI/INCITS/ISO 19134-2007 ITIC 2007 All rights reservedCopyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-34.9 network abstract structure consisting of a set of 0-dimensional obje
42、cts called junctions, and a set of 1-dimensional objects called links that connect the junctions, each link being associated to a start (origin, source) junction and end (destination, sink) junction ISO 19133:2005 NOTE The network is essentially the universe of discourse for the navigation problem.
43、Networks are a variety of one-dimensional topological complexes. In this light, junction and topological nodes are synonyms, as are link and directed edges. 4.10 position data type that describes a point or geometry potentially occupied by an object or person ISO 19133:2005 NOTE A direct position is
44、 a semantic subtype of position. Direct position as described can only define a point and therefore not all positions can be represented by a direct position. That is consistent with the “is type of” relation. An ISO 19107 geometry is also a position, but not a direct position. 4.11 route sequence o
45、f links, and/or partial links, that describe a path, usually between two positions, within a network ISO 19133:2005 4.12 routing finding of optimal (minimal cost function) routes between locations in a network ISO 19133:2005 4.13 tracking monitoring and reporting the location of a vehicle ISO 19133:
46、2005 4.14 transportation mode means that travellers can choose for transportation 4.15 turn part of a route or network consisting of a junction location and an entry and exit link for that junction ISO 19133:2005 4.16 traveller person subject to being navigated, or tracked cf. vehicle ISO 19133:2005
47、 ANSI/INCITS/ISO 19134-2007 ITIC 2007 All rights reservedCopyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-4 4.17 vehicle object subject to being navigated or tracked cf. travelle
48、r ISO 19133:2005 5 Symbols and abbreviated terms 5.1 Acronyms BPR Bureau of Public Roads GDF Geographic Data Format GIS Geographic Information System GML Geographic Markup Language GPS Global Positioning System ITS Intelligent Transportation System LBS Location-Based Service LBMS Location-Based Mobile Services LP Linear Programming PCU Passenger Car-equivalent Unit UML Unified Modeling Language 5.2 UML Notation The UML notation used in this International Standard is described in ISO 19107, and differs from sta
