1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL ANSI/CAN/UL/ULC 2258:2018, Standard for Aboveground Nonmetallic Tanks for Fuel Oil and Other Combustible Liquids STANDARD FOR SAFETY JOINT CANADA-UNITED STATES NATIONAL STANDARD ANSI/UL 2258-20
2、18UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SCC FOREWORD National Standard of Canada A National Standard of Canada is a standard developed by a Standards Council of Canada (SCC) accredited Standards Development Organization, in complia
3、nce with requirements and guidance set out by SCC. More information on National Standards of Canada can be found at www.scc.ca. SCC is a Crown corporation within the portfolio of Innovation, Science and Economic Development (ISED) Canada. With the goal of enhancing Canadas economic competitiveness a
4、nd social well-being, SCC leads and facilitates the development and use of national and international standards. SCC also coordinates Canadian participation in standards development, and identies strategies to advance Canadian standardization efforts. Accreditation services are provided by SCC to va
5、rious customers, including product certiers, testing laboratories, and standards development organizations. A list of SCC programs and accredited bodies is publicly available at www.scc.ca.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL S
6、tandard for Safety for Aboveground Nonmetallic Tanks for Fuel Oil and Other Combustible Liquids, UL/ULC 2258 First Edition, Dated May 17, 2018 Summary of Topics The First Edition of UL/ULC 2258 has been issued to reect the latest ANSI and SCC approval dates, and to incorporate the proposals dated Oc
7、tober 27, 2017 and February 23, 2018. The new and revised requirements are substantially in accordance with Proposal(s) on this subject dated October 27, 2017 and February 23, 2018. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in an
8、y form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpos
9、e. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been
10、advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against
11、any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. MAY 17, 2018 UL/ULC 2258 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR
12、FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 17, 2018 UL/ULC 2258 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL May 17, 2018 1 UL/ULC 2258 Standard for Aboveground Nonmetallic Tanks for Fuel O
13、il and Other Combustible Liquids First Edition May 17, 2018 This ANSI/CAN/UL/ULC Safety Standard consists of the First Edition. The most recent designation of ANSI/UL 2258 as an American National Standard (ANSI) occurred on May 17, 2018. ANSI approval for a standard does not include the Cover Page,
14、Transmittal Pages, Title Page, Preface or SCC Foreword. This standard has been approved as a National Standard of Canada (NSC) by the Standards Council of Canada (SCC). COPYRIGHT 2018 UNDERWRITERS LABORATORIES INC. ANSI/UL 2258-2018UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR D
15、ISTRIBUTION WITHOUT PERMISSION FROM UL MAY 17, 2018 UL/ULC 2258 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface . 4 1 SCOPE .6 2 UNITS OF MEASURMENT .7 3 REFERENCE PUBLICATIONS .7 4 COMPONENTS .7 5 GLOS
16、SARY .8 6 TANK COMPONENTS 75.160.20; 75.200 For further information on UL standards, please contact: Underwriters Laboratories Inc. 171 Nepean Street, Suite 400 Ottawa, Ontario K2P 0B4 Phone: 1-613.755.2729 E-mail: customerserviceulc.ca Web site: This Standard is intended to be used for conformity
17、assessment. The intended primary application of this standard is stated in its scope. It is important to note that it remains the responsibility of the user of the standard to judge its suitability for this particular application. CETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONS FRANAISE E
18、T ANGLAISE. MAY 17, 2018 UL/ULC 2258 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 1 SCOPE 1.1 This Standard covers the minimum requirements for nonmetallic or composite primary tanks, secondary tanks, and open or closed secondary contain
19、ments from 227 to 2500 L (60 to 660 US gal) primary tank capacity intended primarily for the storage and supply of heating fuel for oil burning equipment, or alternately for the storage of diesel fuels for compression ignition engines and motor oils (new and used) for automotive service stations, in
20、 aboveground applications. 1.2 Each tank type is permitted to be fabricated in a combination of various shapes (cylindrical, rectangular or obround), orientations (horizontal, vertical) and may have integral options (tank supports or accessories) as covered in this Standard. 1.3 These shop built tan
21、ks are completely fabricated, inspected, and tested for leakage before shipment from the factory as completely assembled vessels except for options intended for eld assembly in accordance with the manufacturers instructions. 1.4 These tanks are intended for stationary installation and use in accorda
22、nce with, but not limited to, any of the following documents as appropriate for each country below. These tanks are not intended for the transportation of fuel, nor are they intended to be transported while containing liquids. A For the United States; ANSI/NFPA 31, Standard for the Installation of O
23、il-Burning Equipment; ANSI/NFPA 30, Flammable and Combustible Liquids Code; NFPA 30A, Code for Fuel Dispensing Facilities and Repair Garages; and the International Fire Code published by the International Code Council. B For Canada; the National Fire Code of Canada; CSA B139, Installation Code for O
24、il Burning Equipment; Regulations of the appropriate authority having jurisdiction; and CCME Environmental Code of Practice for Aboveground and Underground Storage Tank System Containing Petroleum and Allied Petroleum Products. 1.5 These requirements do not apply to steel tanks covered by the follow
25、ing standards: A UL 80, Standard for Steel Tanks for Oil-Burner Fuels; B CAN/ULC-S602, Standard for Aboveground Steel Tanks for Fuel Oil and Lubricating Oil; C UL 142, Standard for Steel Aboveground Tanks for Flammable and Combustible Liquids; D CAN/ULC-S601, Standard for Shop Fabricated Steel Above
26、ground Tanks for Flammable and Combustible Liquids; E UL 58, Standard for Steel Underground Tanks for Flammable and Combustible Liquids; or F CAN/ULC-S603, Standard for Steel Underground Tanks for Flammable and Combustible Liquids. MAY 17, 2018 UL/ULC 2258 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR
27、 FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 1.6 These requirements do not apply to nonmetallic tanks covered by the following standards: A UL 1316, Standard for Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtur
28、es, and CAN/ULC S615, Standard for Fibre Reinforced Plastic Underground Tanks for Flammable and Combustible Liquid; or B UL 1746, Standard for External Corrosion Protection Systems for Steel Underground Storage Tanks, and CAN/ULC-S603.1, Standard for External Corrosion Protection Systems for Steel U
29、nderground Tanks for Flammable and Combustible Liquids. 1.7 These requirements do not cover storage of waste oils or other combustible liquids with different re, physical or material compatibility properties with respect to the intended liquids in Clause 1.1 but do cover 100 % biodiesel and biodiese
30、l blends up to 100 %. These requirements do not cover storage of ammable liquids. 1.8 These requirements do not cover special evaluations for resistance to hurricanes, tornadoes, earthquakes, oods, res or other natural disasters; or resistance to vehicle impact. 2 UNITS OF MEASURMENT 2.1 Values stat
31、ed without parentheses are the requirement. Values in parentheses are explanatory or approximate information. 3 REFERENCE PUBLICATIONS 3.1 Refer to Appendix B for a list of publications referenced in this Standard. Any undated reference to a code or standard appearing in the requirements of this Sta
32、ndard shall be interpreted as referring to the latest edition of that code or standard. When the latest edition of a Standard is not applicable, the appropriate edition is indicated accordingly in Appendix B. 4 COMPONENTS 4.1 Except as indicated in Clause 4.2, a component of a product covered by thi
33、s Standard shall comply with the requirements for that component. 4.2 A component is not required to comply with a specic requirement that: A Involves a feature or characteristic not required in the application of the component in a product covered by this Standard; or B Is superseded by a requireme
34、nt in this Standard. 4.3 A component shall be used in accordance with its rating established for the intended conditions of use. 4.4 Specic components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specied limits, and shall be used only under those specic conditions. MAY 17, 2018 UL/ULC 2258 7
