1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnectingdevices and passive components Fibre optic connector interfacesPart 20: Type LC connector familyBS EN 61754-20:2012National forewordThis British Standa
2、rd is the UK implementation of EN 61754-20:2012. It is identical to IEC 61754-20:2012. It supersedes BS EN 61754-20:2002 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices
3、 and passive components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012
4、Published by BSI Standards Limited 2012 ISBN 978 0 580 57893 9 ICS 33.180.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Stand-ards Policy and Strategy Committee on 31 August 2012.Amendments issued sin
5、ce publicationDate Text affectedBRITISH STANDARDBS EN 61754-20:2012EUROPEAN STANDARD EN 61754-20 NORME EUROPENNE EUROPISCHE NORM August 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normun
6、g Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61754-20:2012 E ICS 33.180.20 Supersedes EN 61754-20:2002English version Fibre optic interconnecting devices and passive
7、 components - Fibre optic connector interfaces - Part 20: Type LC connector family (IEC 61754-20:2012) Dispositifs dinterconnexion et composants passifs fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 20: Famille de connecteurs de type LC (CEI 61754-20:2012) Lichtwellenleit
8、er - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter- Steckverbindern - Teil 20: Steckverbinderfamilie der Bauart LC (IEC 61754-20:2012) This European Standard was approved by CENELEC on 2012-05-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Reg
9、ulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC
10、 member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official ve
11、rsions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
12、the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61754-20:2012EN 61754-20:2012 - 2 - Foreword The text of document 86B/3343/FDIS, future edition 2 of IEC 61754-20, prepared by IEC/SC 86B “Fibre optic interconnect
13、ing devices and passive components“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61754-20:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement
14、(dop) 2013-02-10 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2013-05-10 This document supersedes EN 61754-20:2002. EN 61754-20:2012 includes the following significant technical changes with respect to EN 61754-20:2002: The changes are to recon
15、sider the whole document and to add Interface IEC 61754-20-9 to IEC 61754-20-16 for plastic optical fibre (POF). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any
16、or all such patent rights. Endorsement notice The text of the International Standard IEC 61754-20:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60793-2-40
17、NOTE Harmonised as EN 60793-2-40. IEC 60794-2-50 NOTE Harmonised as EN 60794-2-50. BS EN 61754-20:2012- 3 - EN 61754-20:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normat
18、ively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by com
19、mon modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61755-3 Series Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces EN 61755-3 Series BS EN 61754-20:2012 2 61754-20 IEC:2012(E) CONTENTS INTRODUC
20、TION . 5 1 Scope . 6 2 Normative references 6 3 Description . 6 4 Interfaces . 6 Annex A (informative) Additional adaptor dimensional information. 22 Bibliography 26 Figure 1 Plug connector interface reference planes 8 Figure 2 Detail A of Figure 1 Plug connector interface Expanded view drawings not
21、-to-scale . 9 Figure 3 Plug connector interface . 10 Figure 4 APC plug connector interface 11 Figure 5 Duplex plug interface 12 Figure 6 Simplex adaptor interface . 14 Figure 7 Junior (Jr.) adaptor interface (optional note g of Table 3) . 15 Figure 8 Duplex adaptor interface . 16 Figure 9 Active dev
22、ice receptacle interface . 18 Figure 10 Duplex active device receptacle interface 19 Figure 11 Pin gauge for active device receptacle 20 Figure A.1 Simplex adaptor 22 Figure A.2 Duplex square flange adaptor 23 Figure A.3 Duplex rectangular flange adaptor . 24 Figure A.4 Quad rectangular flange adapt
23、or . 25 Table 1 Plug to Adaptor/Receptacle Intermateability . 7 Table 2 Plug to Plug Intermateability . 8 Table 3 Dimensions of the plug connector interface 12 Table 4 Plug connector interface Ferrule grade 13 Table 5 Dimensions of the adaptor interface . 16 Table 6 Dimensions of the active device r
24、eceptacle 19 Table 7 Active device receptacle interface Alignment sleeve grade 20 Table 8 Pin gauge grade 21 Table A.1 Dimensions of simplex adaptor . 22 Table A.2 Dimensions of duplex square flange adaptor . 23 Table A.3 Dimensions of duplex rectangular flange adaptor 24 Table A.4 Dimensions for qu
25、ad rectangular flange adaptor . 25 BS EN 61754-20:201261754-20 IEC:2012(E) 5 INTRODUCTION The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning IEC 61754-20. IEC takes no positi
26、on concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of t
27、he holder of this patent right is registered with IEC. Information may be obtained from: OFS Fitel LLC, Inc., 2000 NE Expressway, Norcross, GA 30071 USA Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified ab
28、ove. IEC shall not be held responsible for identifying any or all such patent rights. ISO (www.iso.org/patents) and IEC (http:/www.iec.ch/tctools/patent_decl.htm) maintain on-line data bases of patents relevant to their standards. Users are encouraged to consult the data bases for the most up to dat
29、e information concerning patents. BS EN 61754-20:2012 6 61754-20 IEC:2012(E) FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 20: Type LC connector family 1 Scope This International Standard defines the standard interface dimensions for the type LC fam
30、ily of connectors. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (
31、including any amendments) applies. IEC 61755-3 series, Fibre optic interconnecting devices and passive components Fibre optic connector optical interfaces 3 Description The parent connector for type LC connector family is a simplex plug connector set of plug/adaptor/plug configuration which is chara
32、cterized by: A 1,25 mm nominal diameter ferrule or, in the case of 1 mm OD POF, the fibre acts as the ferrule. The connector includes a single coupling latch and a ferrule spring loaded in the direction of the optical axis The plug has a single male key, which may be used to orient and limit the rel
33、ative position between the connector and the component to which it is mated. The optical alignment mechanism of the connectors is a rigid bore sleeve or a resilient sleeve. Drawings and dimensions provided consist of those minimum features that are functionally critical during the mating and unmatin
34、g sequences of the plug with its adapter/receptacle counterpart component. The provided dimensions might cause intermateability problems with plugs not compliant to the standard. 4 Interfaces This standard contains the following standard interfaces: Interface 20-1: simplex plug connector interface P
35、C Interface 20-2: simplex adaptor interface Interface 20-3: simplex active device receptacle interface Interface 20-4: duplex plug connector interface PC Interface 20-5: duplex adaptor interface BS EN 61754-20:201261754-20 IEC:2012(E) 7 Interface 20-6: duplex active device receptacle interface Inter
36、face 20-7: simplex plug connector interface APC 8 Interface 20-8: duplex plug connector interface APC 8 Interface 20-9: simplex plug connector interface POF 1,25 mm jacketed OD Interface 20-10: duplex plug connector interface POF 1,25 mm jacketed OD Interface 20-11: simplex plug connector interface
37、POF 1 mm Interface 20-12: duplex plug connector interface POF 1 mm Interface 20-13: simplex adaptor interface POF 1 mm Interface 20-14: duplex adaptor interface POF 1 mm Interface 20-15: simplex active device receptacle interface POF 1 mm Interface 20-16: duplex active device receptacle interface PO
38、F 1 mm The plug of interface IEC 61754-20-1 and interface IEC 61754-20-4 has a ferrule with a spherically polished endface (PC) shown in Figure 2a. The plug of interface IEC 61754-20-7 and interface IEC 61754-20-8 has a ferrule with a spherically polished angled endface (APC) shown in Figure 2c. The
39、 plug interfaces IEC 61754-20-9 through IEC 61754-20-12 have a flat smooth endface shown in Figure 2b (POF only). Plug interfaces IEC 61754-20-9 and IEC 61754-20-10 (POF 1,25 mm jacketed OD) have a POF fibre of up to 0.750 mm in a 1,25 mm OD ferrule. Plug interfaces IEC 61754-20-11 and IEC 61754-20-
40、12 is the 1 mm POF without the use of a ferrule (see Table 3, Note f). The plug connector interfaces and associated details are given in Figures 1, 2, 3, 4, and 5 along with Tables 3 and 4. The adaptor interfaces and associated details are given in Figures 6, 7, and, 8 along with Table 5. The active
41、 device receptacle interfaces and associated details are given in Figures 9, 10, and 11 along with Tables 6, 7, and 8. The intermateability between plugs, adaptors, and receptacles are given in Table 1. The intermateability between the different plug interfaces are given in Table 2. Table 1 Plug to
42、Adaptor/Receptacle Intermateability Plug Interfaces IEC 61754 Adaptor/Active Device Receptacle Interfaces IEC 61754 20-2 20-3 20-5 20-6 20-13 20-14 20-15 20-16 20-1 Mate Mate Mate Mate Not mate Not mate Not mate Not mate 20-4 Not mate Not mate Mate Mate Not mate Not mate Not mate Not mate 20-7 Mate
43、Not mate Mate Not mate Not mate Not mate Not mate Not mate 20-8 Not mate Not mate Mate Not mate Not mate Not mate Not mate Not mate 20-9 Mate Mate Mate Mate Not mate Not mate Not mate Not mate 20-10 Not mate Not mate Mate Mate Not mate Not mate Not mate Not mate 20-11 Not mate Not mate Not mate Not
44、mate Mate Mate Mate Mate 20-12 Not mate Not mate Not mate Not mate Not mate Mate Not mate Mate BS EN 61754-20:2012 8 61754-20 IEC:2012(E) Table 2 Plug to Plug Intermateability Plug Interfaces IEC 61754 Plug Interface IEC 61754 20-1 20-4 20-7 20-8 20-9 20-10 20-11 20-12 20-1 Mate Mate Not mate Not ma
45、te Not Mate Not Mate Not mate Not mate 20-4 Mate Mate Not mate Not mate Not Mate Not Mate Not mate Not mate 20-7 Not mate Not Mate Mate Mate Not mate Not mate Not mate Not mate 20-8 Not mate Not mate Mate Mate Not mate Mot mate Not Mate Not mate 20-9 Not Mate Not Mate Not mate Not mate Mate Mate Not
46、 mate Not mate 20-10 Not Mate Not Mate Not mate Not mate Mate Mate Not mate Not mate 20-11 Not mate Not mate Not mate Not mate Not mate Not mate Mate Mate 20-12 Not mate Not mate Not mate Not mate Not mate Not mate Mate Mate Figure 1 Plug connector interface reference planes IEC 284/12 BS EN 61754-2
47、0:201261754-20 IEC:2012(E) 9 Key See Table 3. Figure 2 Detail A of Figure 1 Plug connector interface Expanded view drawings not-to-scale Refer to IEC 61755-3 series documents for information on the end-face geometry requirements of PC and APC interfaces, respectively. IEC 285/12 BS EN 61754-20:2012
48、10 61754-20 IEC:2012(E) a) Plug connector interface b) Section a-a c) Section b-b Key See Table 3. Figure 3 Plug connector interface IEC 287/12 BS EN 61754-20:201261754-20 IEC:2012(E) 11 c) Top view Key See Table 3. Figure 4 APC plug connector interface IEC 288/12 BS EN 61754-20:2012 12 61754-20 IEC
49、:2012(E) Key See Table 3. Figure 5 Duplex plug interface Table 3 Dimensions of the plug connector interface Reference Dimensions in millimeters Remarks Minimum Maximum A - - Table 4fB a10,3 10,5 C 4,2 4,4 D 3,2 3,35 E 2,2 2,4 F 0,3 0,5 Radius G 4,88 5,00 Ferrule extension H1 e4,42 4,52 H2 e4,42 4,52 I 3,0 3,2 Diameter J H/2 H/2 K 6,25 Basic dimension L e 0,2 Degre
