1、BSI Standards PublicationBS EN ISO 8536-9:2015Infusion equipment for medicalusePart 9: Fluid lines for single use withpressure infusion equipmentBS EN ISO 8536-9:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO8536-9:2015. It supersedes BS EN ISO 8536-9:
2、2004 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee CH/212, IVDs.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Use
3、rs are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 83293 2ICS 11.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of t
4、heStandards Policy and Strategy Committee on 30 June 2015.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 8536-9 June 2015 ICS 11.040.20 Supersedes EN ISO 8536-9:2004English Version Infusion equipment for medical use - Part 9: Fluid lines
5、 for single use with pressure infusion equipment (ISO 8536-9:2015) Matriel de perfusion usage mdical - Partie 9: Tubulures non rutilisables avec des appareils de perfusion sous pression (ISO 8536-9:2015) Infusionsgerte zur medizinischen Verwendung - Teil 9: bertragungsleitungen zur einmaligen Verwen
6、dung mit Druckinfusionsapparaten (ISO 8536-9:2015) This European Standard was approved by CEN on 16 April 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alt
7、eration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language ma
8、de by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Esto
9、nia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STAN
10、DARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8536-9:2015 EBS EN ISO 8536-9:2015E
11、N ISO 8536-9:2015 (E) 3 European foreword This document (EN ISO 8536-9:2015) has been prepared by Technical Committee ISO/TC 76 “Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use” in collaboration with Technical Committee CEN/TC 205 “Non-active me
12、dical devices” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2015, and conflicting national standards shall be withdrawn at the latest by Decemb
13、er 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 8536-9:2004. In this edition, the following c
14、hanges have been made: the former Clause 3 on designation has been deleted; 5.8 has been amended and an appropriate Annex C added; Clause 9 on labelling was amended by addition of information regarding the usage of the symbol “XXX” according ISO 7000, Symbol 2725; Clause 10 on disposal has been adde
15、d; A.4 has been amended; the former A.5 specifying a test for leakage of adapters with female and/or male conical fittings has been deleted; normative references and the Bibliography have been updated; document has been editorially revised This document has been prepared under a mandate given to CEN
16、 by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national stand
17、ards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu
18、xembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN ISO 8536-9:2015EN ISO 8536-9:2015 (E) 4 Endorsement notice The text of ISO 8536-9:2015 has been approved by CEN as EN ISO 8536-9:2015 without any modi
19、fication. Table Correlations between undated normative references and dated EN and ISO standards Normative references as listed in Clause 2 Equivalent dated standard EN ISO ISO 594-2 - ISO 594-2:1998 ISO 7000 - ISO 7000:2014 ISO 7864 EN ISO 7864:1995 ISO 7864:1993 ISO 8536-10 EN ISO 8536-10:2015 ISO
20、 8536-10:2015 ISO 8536-11 EN ISO 8536-11:2015 ISO 8536-11:2015 ISO 10993-4 EN ISO 10993-4:2009 ISO 10993-4:2002 plus Amd.1:2006 ISO 15223-1 EN ISO 15223-1:2012 ISO 15223-1:2012 BS EN ISO 8536-9:2015EN ISO 8536-9:2015 (E) 5 Annex ZA (informative) Relationship between this European Standard and the Es
21、sential Requirements of EC Directive 93/42/EEC on medical devices This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 93/42/EE
22、C on medical devices Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the clauses of this standard given in Table ZA.1 confers, within the limits of the s
23、cope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations Table ZA.1 Correspondence between this European Standard and Directive 93/42/EEC on medical devices Clause(s)/subclause(s) of this EN Essential Requireme
24、nts (ERs) of Directive 93/42/EEC Qualifying remarks/Notes Clause 3, 4.1, 4.2, 4.3, 4.4, 4.5, 4.8, 4.9, Clause 6 7.2 The part of ER 7.2 relating to packaging is not addressed. For packaging see Clause 7 of this standard. 4.1, 4.2, 4.3, 4.4, 4.5, 4.8, 4.9, Clause 6 7.3 ER covered by biological evaluat
25、ion. 4.3, 4.4, A.3, A.4 7.5 Only the first sentence is covered. Presumption of conformity with the Essential Requirements relating to the biological evaluation can only be provided if the manufacturer chooses to apply the ISO 10993- series of standards. 4.2, 4.3 7.6 4.2, 4.3, 4.4 8.1 The part of ER
26、8.1 relating to handling is not addressed. Manufacturing processes are not covered. Only sterility of product is covered. 8.3 6.1 8.4 Only the sterilization method is covered. 4.2 8.5 8.2, 8.3 8.7 4.5, 4.8, 8.2 g) 9.1 The second sentence of ER 9.1 is not addressed. BS EN ISO 8536-9:2015EN ISO 8536-9
27、:2015 (E) 6 Clause(s)/subclause(s) of this EN Essential Requirements (ERs) of Directive 93/42/EEC Qualifying remarks/Notes Clause 3, 4.1, 4.2, 4.3, 4.4, 4.5, 4.8, 4.9 9.2 4.8 10.1 to 10.3 4.3, A.3 12.7.1 Only tensile strength is addressed. 8 13.1 8.2 d), e), f), g), 8.3 c) 13.2 8.2, 8.3 13.3 The par
28、t of 13.3 a) relating to the authorized representative is not addressed. Presumption of conformity to the rest of 13.3 a) is only provided if the name and address of the manufacturer are given. 13.3 d) is only covered if the batch number is preceded by the word LOT. 13.3 f) Requirement indication of
29、 single use must be consistent across the Community“ is not addressed in the standard. 13.3 g), h) is not addressed in the standard. 8.2, 8.3 13.4 13.4 is addressed regarding to the label. 8.2, 8.3 13.5 13.5 is not addressed regarding to the detachable components. 8.2, 8.3 13.6 13.6 e), f), h), i),
30、j), l), m), o) are not applicable for devices according to this standard 13.6 q) is not addressed. WARNING Other requirements and other EC Directives may be applicable to the product(s) falling within the scope of this standard BS EN ISO 8536-9:2015ISO 8536-9:2015(E)Foreword iv1 Scope . 12 Normative
31、 references 13 Termes and definitions 14 Materials . 25 Physical requirements 35.1 Transparency 35.2 Particulate contamination . 35.3 Tensile strength 35.4 Leakage 35.5 Adapters with female and/or male conical fittings . 35.6 Accessories . 35.7 Filters 35.8 Storage volume . 35.9 Injection needles .
32、35.10 Protective caps 36 Chemical requirements . 47 Biological requirements . 47.1 Sterility 47.2 Pyrogens . 47.3 Haemolysis . 48 Packaging . 49 Labelling 49.1 General . 49.2 Label on unit container 49.3 Label on shelf or multi-unit container 510 Disposal 5Annex A (normative) Physical tests . 6Annex
33、 B (normative) Chemical tests 7Annex C (normative) Storage volume 8Bibliography .11 ISO 2015 All rights reserved iiiContents PageBS EN ISO 8536-9:2015ISO 8536-9:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member
34、bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental
35、and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
36、described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is dra
37、wn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on
38、the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessmen
39、t, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.The committee responsible for this document is ISO/TC 76, Transfusion, infusion and injection, and blood processing equipment for
40、medical and pharmaceutical use.This second edition cancels and replaces the first edition (ISO 8536-9:2004), which has been technically revised with the following changes: The former Clause 3 on designation has been deleted; 5.8 has been amended and an appropriate Annex C has been added; Clause 9 on
41、 labelling was amended by addition of information regarding the usage of the symbol “XXX” according ISO 7000, symbol 2725; Clause 10 on disposal has been added; A.4 has been amended; The former A.5 specifying a test for leakage of adapters with female and/or male conical fittings has been deleted; N
42、ormative references and the Bibliography have been updated; document has been editorially revised.ISO 8536 consists of the following parts under the general title Infusion equipment for medical use: Part 1: Infusion glass bottles Part 2: Closures for infusion bottles Part 3: Aluminium caps for infus
43、ion bottles Part 4: Infusion sets for single use, gravity feed Part 5: Burette infusion sets for single use, gravity feediv ISO 2015 All rights reservedBS EN ISO 8536-9:2015ISO 8536-9:2015(E) Part 6: Freeze drying closures for infusion bottles Part 7: Caps made of aluminium-plastics combinations for
44、 infusion bottles Part 8: Infusion sets for single use with pressure infusion apparatus Part 9: Fluid lines for single use with pressure infusion equipment Part 10: Accessories for fluid lines for single use with pressure infusion equipment Part 11: Infusion filters for single use with pressure infu
45、sion equipment Part 12: Check valvesThe following parts are under preparation: Part 13: Graduated flow regulators for single use with infusion sets Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact ISO 2015 All rights reserved vBS EN ISO 8536-9:2015BS E
46、N ISO 8536-9:2015Infusion equipment for medical use Part 9: Fluid lines for single use with pressure infusion equipment1 ScopeThis part of ISO 8536 applies to sterilized fluid lines for single use for use with pressure infusion equipment up to a maximum of 200 kPa (2 bar).The following items are cov
47、ered by this part of ISO 8536:a) syringe pump lines (SPL);b) connecting lines (CL);c) lines with integrated injection cannula (LIC).In some countries, the national pharmacopoeia or other national regulations are legally binding and take precedence over this part of ISO 8536.2 Normative referencesThe
48、 following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 594-2,1
49、)Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 2: Lock fittingsISO 7000, Graphical symbols for use on equipment Registered symbolsISO 7864, Sterile hypodermic needles for single useISO 8536-4:2010, Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feedISO 8536-10, Infusion equipment for medical use Part 10: Accessories for fluid lines for single use with pressure infusion equipmentISO 8536-11, Infusion equipment fo
