CSN 25 4354-1983 Gauges for edison screw《圆螺纹规》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 4800-8-2002 Aerospace series Titanium and titanium alloys Technical specification Part 8 Pre-prodcution and production castings Edition P 1《航空航天系列.钛和钛合金 技术规范.第8部分 预生产和生产.pdf

AECMA PREN 6000-1998 Aerospace Series Aluminium Alloy AL-P2024-T351 Plate 6 0 mm Less Than a Less Than or Equal to 55 mm Close-Tolerance Flatness Edition P 1《航空航天系列.铝合金AL-P2024-T35.pdf

AECMA PREN 6018-1990 Aerospace Series Test Methods for Metallic Materials Determination of Density According to Displacement Method Issue P 1《航空航天系列.金属物质试验方法密度根据位移方法P1》.pdf

AECMA PREN 6019-1990 Aerospace Series Test Methods for Metallic Materials Recommended Practice for R-Curve and Kco Determination Issue P 1《航空航天系列.金属物质试验方法操作规程建议R曲线问题P1》.pdf

AECMA PREN 6024-1995 Aerospace Series Screws 100 Degrees Countersunk Reduced Head Offset Cruciform Recess Close Tolerance Shank Short Thread in Titanium Alloy Anodized MoS2 Lubrica.pdf

AECMA PREN 6025-1998 Aerospace Series Plates Aluminium Alloy 2024 Close-Tolerance Flatness Thickness 6 mm Less than a Less than or Equal to 55 mm Dimensions Edition P 3 [Superseded.pdf

AECMA PREN 6029-1998 Aerospace Series Rod-Ends Adjustable Single Fork with UNJ Threaded Shank Min Engagement 1 5 x Thread Diameter in Corrosion Resisting Steel Dimensions and Loads.pdf

AECMA PREN 6030-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of the Mechanical Degradation Due to Chemical Paint Strippers Edition P1《航空航天系列.纤维加固塑料试验方法.pdf

AECMA PREN 6031-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of in-Plane Shear Properties (+ - 45 Degree Tensile Test) Edition P1《航空航天系列.纤维加固塑料试验方法飞机内修.pdf