CNS 14590-2001 Welding consumables-Technical delivery conditions for welding filler metals-Type of product dimensions mass tolerances and marking《焊接材料之尺度、质量、许可差、制品状态、标示及包装》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 3359-1982 数据的统计处理和解释 统计容许区间的确定.pdf

GB T 3360-1982 数据的统计处理和解释 均值的估计和置信区间.pdf

GB T 3362-1982 碳纤维复丝拉伸性能检验方法.pdf

GB T 3363-1982 碳纤维复丝纤维根数检验方法(显微镜法).pdf

GB T 3364-1982 碳纤维直径和当量直径检验方法(显微镜法).pdf

GB T 3365-1982 碳纤维增强塑料孔隙含量检验方法(显微镜法).pdf

GB T 3366-1996 碳纤维增强塑料纤维体积含量试验方法.pdf

GB T 3369-1989 工业自动化仪表用模拟直流电流信号.pdf

GB T 3370-1989 工业自动化仪表用模拟直流电压信号.pdf