DLA A-A-55829 A-2011 ACETIC ACID GLACIAL TECHNICAL.pdf

上传人:eventdump275 文档编号:687075 上传时间:2018-12-30 格式:PDF 页数:3 大小:56.93KB
下载 相关 举报
DLA A-A-55829 A-2011 ACETIC ACID GLACIAL TECHNICAL.pdf_第1页
第1页 / 共3页
DLA A-A-55829 A-2011 ACETIC ACID GLACIAL TECHNICAL.pdf_第2页
第2页 / 共3页
DLA A-A-55829 A-2011 ACETIC ACID GLACIAL TECHNICAL.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: STDZNMGTdla.mil or Defense Logistics Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616. Since contact information can change, you m

2、ay want to verify the currency of this address information using the ASSIST database at https:/assist.daps.dla.mil/. FSC 6810 METRIC A-A-55829A 22 March 2011 SUPERSEDING A-A-55829 4 February 1997 COMMERCIAL ITEM DESCRIPTION ACETIC ACID, GLACIAL, TECHNICAL The General Services Administration has auth

3、orized the use of this commercial item description for all federal agencies. 1. SCOPE. This commercial item description (CID) covers technical grade glacial acetic acid. 2. SALIENT CHARACTERISTICS 2.1 Appearance. When inspected visually, the technical grade glacial acetic acid shall be a clear, colo

4、rless liquid and shall be free from sediment or suspended matter. The product freezes below room temperature, at approximately 16.5 C (62 F), to a colorless crystalline solid. 2.2 Assay. Assay shall be tested in accordance with American Chemical Society (ACS) specification “Reagent Chemicals: Specif

5、ications and Procedures“. The glacial acetic acid shall have a freezing point of not less than 15.7 C (60.3 F). This is equivalent to not less than 99.5 percent by weight as CH3COOH. 3. REGULATORY REQUIREMENTS 3.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials t

6、o the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 3.2 Labeling, packaging and marking. Items shall be labeled, packed and marked in accordance with 49 Code of Federal Regulations (CFR), Parts 100 to 199. Provided by IHSNot for ResaleNo

7、 reproduction or networking permitted without license from IHS-,-,-A-A-55829A 2 3.3 Material safety data sheet (MSDS). A MSDS shall be furnished in accordance with FED-STD-313, “Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities“, a

8、nd 29 CFR 1910.1200, “Hazard Communication“. 3.4 Hazard warning label. An Occupational Safety and Health Administration hazard warning label shall be furnished in accordance with 29 CFR 1910.1200. 4. PRODUCT CONFORMANCE PROVISIONS 4.1 Product conformance. The product provided shall meet the salient

9、characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The government reserves the right to require proof of such conformance. 4.2 Market acceptability. Th

10、e product offered must have been previously sold either to the government or on the commercial market. 5. PACKAGING 5.1 Preservation, packing, and marking. Preservation, packing, and marking shall be as specified in the acquisition order (see 6.2(b). 6. NOTES 6.1 Sources of documents. 6.1.1 CFR and

11、FAR. Copies of CFR and FAR may be obtained from the Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954. Electronic copies of CFR documents may be obtained from http:/www.gpoaccess.gov/ecfr/. Electronic copies of FAR documents may be obtained from https:/www.acquisition.gov/far/.

12、 6.1.2 Federal standards. Copies of federal standards may be obtained from General Services Administration, Federal Supply Service, Specification Section, 470 East LEnfant Plaza SW, Suite 8100, Washington, DC 20407. Electronic copies may be obtained from https:/assist.daps.dla.mil/. 6.1.3 ACS. Copie

13、s of ACS specifications may be obtained from the American Chemical Society, 1155 Sixteenth Street, N.W., Washington, DC 20036. Electronic copies may be obtained from http:/pubs.acs.org/. 6.2 Ordering data. The acquisition order should specify the following information: a. CID document number and rev

14、ision. b. Preservation, packing, and marking (see 5.1). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55829A 3 6.3 Subject term (key word) listing. Assay Chemical reagent MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY:Custodians: Army -

15、 CR Navy - AS Air Force - 68 DLA - GS GSA - FAS HHS - NIH Review Activities: Army - MD1, MI Navy - OS Preparing Activity: DLA - GS3 (Project 6810-2011-002) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • ASD-STAN PREN 4358-2000 Aerospace Series Six Lobe Recess Drivers Double Ended 90 Degrees (Edition P 1)《航空航天系列 双头式90°六瓣凹槽起子 第P1版》.pdf ASD-STAN PREN 4358-2000 Aerospace Series Six Lobe Recess Drivers Double Ended 90 Degrees (Edition P 1)《航空航天系列 双头式90°六瓣凹槽起子 第P1版》.pdf
  • ASD-STAN PREN 4359-2000 Aerospace Series Six Lobe Recess Drivers Technical Specification (Edition P 1)《航空航天系列 六瓣凹槽起子 技术规范 第P1版》.pdf ASD-STAN PREN 4359-2000 Aerospace Series Six Lobe Recess Drivers Technical Specification (Edition P 1)《航空航天系列 六瓣凹槽起子 技术规范 第P1版》.pdf
  • ASD-STAN PREN 4364-2001 Aerospace Series Cast Acrylic Properties (Edition P 1)《航空航天系列 铸造丙烯酸塑料特性 第P1版》.pdf ASD-STAN PREN 4364-2001 Aerospace Series Cast Acrylic Properties (Edition P 1)《航空航天系列 铸造丙烯酸塑料特性 第P1版》.pdf
  • ASD-STAN PREN 4365-2001 Aerospace Series Heat and Crazing Resistant Cast Acrylic Crosslinked and Low Moisture Absorption Properties (Edition P 1)《航空航天系列 交联和低水分吸收性耐高温和耐开裂型浇铸丙烯酸树脂材.pdf ASD-STAN PREN 4365-2001 Aerospace Series Heat and Crazing Resistant Cast Acrylic Crosslinked and Low Moisture Absorption Properties (Edition P 1)《航空航天系列 交联和低水分吸收性耐高温和耐开裂型浇铸丙烯酸树脂材.pdf
  • ASD-STAN PREN 4366-2001 Aerospace Series Heat and Crazing Resistant Cast Acrylic Crosslinked Multi-Axially Stretched and Low Moisture Absorption Properties (Edition P 1)《航空航天系列 低水分.pdf ASD-STAN PREN 4366-2001 Aerospace Series Heat and Crazing Resistant Cast Acrylic Crosslinked Multi-Axially Stretched and Low Moisture Absorption Properties (Edition P 1)《航空航天系列 低水分.pdf
  • ASD-STAN PREN 4367-2001 Aerospace Series Cast Acrylic Sheets Dimensions (Edition P 1)《航空航天系列 浇铸聚丙烯酸酯板材 尺寸 第P1版》.pdf ASD-STAN PREN 4367-2001 Aerospace Series Cast Acrylic Sheets Dimensions (Edition P 1)《航空航天系列 浇铸聚丙烯酸酯板材 尺寸 第P1版》.pdf
  • ASD-STAN PREN 4368-1997 Aerospace Series Heat Resisting Alloy NI-CD1701 (NiCo15Cr10Al6Ti5Mo3) Non Heat Treated Remelting Stock (Edition P 1)《航空航天系列 耐热合金NI-CD1701(NiCo15Cr10Al6Ti5Mo.pdf ASD-STAN PREN 4368-1997 Aerospace Series Heat Resisting Alloy NI-CD1701 (NiCo15Cr10Al6Ti5Mo3) Non Heat Treated Remelting Stock (Edition P 1)《航空航天系列 耐热合金NI-CD1701(NiCo15Cr10Al6Ti5Mo.pdf
  • ASD-STAN PREN 4369-1997 Aerospace Series Heat Resisting Alloy NI-PH1701 (NiCr15Co14Al5Ti4Mo4) Solution Treated and Precipitation Treated Bar and Section De Less Than or Equal to 10.pdf ASD-STAN PREN 4369-1997 Aerospace Series Heat Resisting Alloy NI-PH1701 (NiCr15Co14Al5Ti4Mo4) Solution Treated and Precipitation Treated Bar and Section De Less Than or Equal to 10.pdf
  • ASD-STAN PREN 4370-1997 Aerospace Series Heat Resisting Alloy NI-PH1701 (NiCr15Co14Al5Ti4Mo4) Non Heat Treated Forging Stock a or D Less Than or Equal to 100 mm (Edition P 1)《航空航天系.pdf ASD-STAN PREN 4370-1997 Aerospace Series Heat Resisting Alloy NI-PH1701 (NiCr15Co14Al5Ti4Mo4) Non Heat Treated Forging Stock a or D Less Than or Equal to 100 mm (Edition P 1)《航空航天系.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1