1、 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), PLUG, (RFI, BAYONET COUPLING, CRIMP SOCKET CONTACT), (SERIES III, CLASSES G, M, R, T, W AND Z) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements
2、for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83723. FIGURE 1. Dimensions and configurations. AMSC N/A FSC 5935 INCH-POUND MIL-DTL-83723/77D 19 August 2009 SUPERSEDING MIL-DTL-83723/77C 20 October 2000 Provided by IHSNot for ResaleNo reproduction or
3、 networking permitted without license from IHS-,-,-MIL-DTL-83723/77D 2 FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/77D 3 Shell size A max G min H J L min U max V 8 .312 .352 .415
4、.424 .540 .545 .632 .776 .025 10 .388 .428 .517 .526 .662 .667 .760 .906 .031 12 .558 .598 .687 .696 .832 .837 .930 1.078 .031 14 .627 .667 .756 .765 .901 .906 .999 1.141 .031 16 .772 .794 .883 .892 1.028 1.033 1.126 1.266 .031 18 .860 .900 .989 .998 1.134 1.139 1.232 1.375 .031 20 .985 1.025 1.114
5、1.123 1.261 1.266 1.357 1.510 .031 22 1.110 1.150 1.239 1.248 1.384 1.389 1.482 1.625 .031 24 1.235 1.275 1.364 1.373 1.511 1.516 1.607 1.760 .031 FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MI
6、L-DTL-83723/77D 4 Inches mm Inches mm Inches mm Inches mm Inches mm .015 0.38 .206 5.23 .662 16.81 .985 25.02 1.261 32.03 .035 0.89 .210 5.33 .667 16.94 .998 25.35 1.266 32.16 .051 1.30 .312 7.92 .678 17.22 .999 25.37 1.275 32.39 .054 1.37 .320 8.13 .687 17.45 1.025 26.04 1.357 34.47 .076 1.93 .352
7、8.94 .696 17.68 1.028 26.11 1.364 34.65 .092 2.34 .366 9.30 .756 19.20 1.033 26.24 1.373 34.87 .093 2.36 .383 9.73 .760 19.30 1.078 27.38 1.375 34.93 .096 2.44 .388 9.86 .765 19.43 1.110 28.19 1.384 35.15 .105 2.67 .415 10.54 .772 19.61 1.114 28.30 1.389 35.28 .107 2.72 .424 10.77 .776 19.71 1.123 2
8、8.52 1.482 37.64 .114 2.90 .428 10.87 .794 20.17 1.126 28.60 1.510 38.35 .118 3.00 .517 13.13 .832 21.13 1.134 28.80 1.511 38.38 .125 3.18 .526 13.36 .837 21.36 1.139 28.93 1.516 38.51 .146 3.71 .540 13.72 .860 21.84 1.141 28.98 1.607 40.82 .150 3.81 .545 13.84 .883 22.43 1.150 29.21 1.625 41.28 .17
9、0 4.32 .552 14.02 .892 22.66 1.230 31.24 1.760 44.70 .177 4.50 .558 14.17 .900 22.86 1.232 31.29 .182 4.62 .598 15.19 .901 22.89 1.235 31.37 .185 4.70 .627 15.93 .906 23.01 1.239 31.47 .200 5.08 .632 16.05 .930 23.62 1.248 31.70 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for
10、 information only. 3. Unless otherwise specified, tolerances are .005 (0.13 mm) for three place decimals and .01 (0.25 mm) for two place decimals and 1ofor all angles. 4. Rear accessory interchangeability dimensions shall be in accordance with MIL-DTL-83723. 5. See table I for contact cavities requi
11、ring this dimension. FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/77D 5 REQUIREMENTS: Dimensions and configuration: See figure 1. For insert arrangements, see MIL-STD-1554 and tabl
12、e I. TABLE I. Inserts requiring reduced diameters for lead-in chamfers on contact cavities. Shell size Insert arrangements Contact cavities 8 03 1, 2, 3 10 06 1, 2, 3, 4, 5, 6 For connector accessories: See SAE-AS85049. This connector mates with MIL-DTL-83723/72, MIL-DTL-83723/74, MIL-DTL-83723/79,
13、MIL-DTL-83723/80, MIL-DTL-83723/81, MIL-DTL-83723/93 and MIL-DTL-83723/94. Part or Identifying Number (PIN) example: M83723/ 77 W 22 55 N Military designator Specification sheet number Class Shell size Insert arrangement Polarizing position Changes from previous issue. Marginal notations are not use
14、d in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83723, this document references the following: MIL-DTL-83723/72 MIL-DTL-83723/74 MIL-DTL-83723/79 MIL-DTL-83723/80 MIL-DTL-83723/81 MIL-DTL-83723/9
15、3 MIL-DTL-83723/94 MIL-STD-1554 SAE-AS85049 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/77D 6 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 85 (Project 5935-2008-159) DLA - CC Review ac
16、tivities: Army - AR, MI Navy - EC Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
