1、INCH-POUNDMS24700B 14 July 2005 SUPERSEDING MS24700A 7 March 1962 DETAIL SPECIFICATION SHEET BUSHING, FIXED, CONNECTOR, RACK AND PANEL, MINIATURE Inactive for new design after 8 June 1999. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requir
2、ements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-26518. The Qualified Products List (QPL) associated with this inactive for new design specification will be maintained until acquisition of the product is no longer required, where upon the specif
3、ication and QPL will be canceled. Inches mm .013 .019 .062 .096 .104 .138 .238 .246 .271 .275 .365 .374 .377 0.33 0.48 1.57 2.44 2.64 3.51 6.05 6.25 6.88 6.99 9.27 9.50 9.58 FIGURE 1. Spring loaded mounting assembly. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permit
4、ted without license from IHS-,-,-MS24700B 2 NOTES: 1. All dimensions in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified tolerances are .005 inches (0.13 mm) and angles 5. All diameters are to be concentric with each other within .002 inches (0.05 m
5、m) T.I.R (total Indicated runout). FIGURE 1. Spring loaded mounting assembly Continued. REQUIREMENTS: Dimensions and configuration see figure 1. Material: Stainless steel type 303 in accordance with ASTM A582 UNS designator 530300. Aluminum alloy 2024, in accordance with SAE-AMS-QQ-A-225/6 UNS desig
6、nator A92024 temper T4. Finish: Cadmium plate in accordance with SAE-AMS-QQ-P-416, type II, class 3. Part or identifying number (PIN): PIN Bushing material MS24700-1 Aluminum MS24700-2 Stainless steel Referenced documents: In addition to MIL-DTL-26518 this document references the following: ASTM A58
7、2 SAE-AMS-QQ-A-225/6 SAE-AMS-QQ-P-416 FED-STD-H28 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without licens
8、e from IHS-,-,-MS24700B 3 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 11 (Project 5935-4702-000) DLA - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
