1、BS EN 14307:2009ICS 91.100.60NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDThermal insulationproducts for buildingequipment andindustrial installationsBS EN 14308:2009 +A1:2013IncorporatingcorrigendumMay 2013 Factory made rigid polyurethane foam (PUR) and poly
2、isocyanurate foam (PIR) products SpecificationCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 14308:2009+A1:
3、2013. It supersedes BS EN 14308:2009, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The U
4、K participation in its preparation was entrusted to Technical Committee PRI/72, Rigid cellular materials.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users ar
5、e responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 14308:2009+A1:2013This British Standard waspublished under the authorityof the Standards Policy andStrategy Committeeon 31 May 2010. The British StandardsInstitution 2013.
6、 Publishedby BSI Standards Limited2013Amendments/corrigenda issued since publicationDate Comments 30 April 2013 Implementation of CEN amendment A1:201331 May 2013 BS title aligned with CEN titleISBN 978 0 580 83069 3Copyright European Committee for Standardization Provided by IHS under license with
7、CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14308:2009+A1 January 2013 ICS 91.100.60 Supersedes EN 14308:2009English Version Thermal insulation products for building equipment and industrial installations
8、- Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en mousse rigide de polyurthane (PUR) et en mousse polyisocyanurate (PIR) - Spcifica
9、tion Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Polyurethan-Hartschaum (PUR) und Polyisocyanurat-Schaum (PIR) - Spezifikation This European Standard was approved by CEN on 29 September 2009 and includes Amend
10、ment 1 approved by CEN on 11 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
11、such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its
12、own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany
13、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NO
14、RMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14308:2009+A1:2013: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for Res
15、aleNo reproduction or networking permitted without license from IHS-,-,-EN 14308:2009+A1:2013 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .7 4 Requirements 11 5 Test methods . 17 6 Designation code 20 7 Evaluation of co
16、nformity 21 8 Marking and labelling . 22 Annex A (normative) Factory production control . 23 Annex B (normative) Determination of minimum service temperature 27 Annex C (normative) Determination of the aged value of thermal conductivity and thermal resistance 33 Annex D (informative) Additional prop
17、erties . 41 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 43 Bibliography . 51 Figures Figure B.1 Dimensions of test specimens 32 Figure C.1 Flow chart of the alternative ageing procedures 34 Figure ZA.1 Example of CE m
18、arking information 50 Tables Table 1 Dimensional tolerances 12 Table 2 Levels for dimensional stability . 13 Table 3 Levels for compressive stress or compressive strength 15 Table 4 Test methods, test specimens and conditions. 18 Table A.1 Minimum product testing frequencies . 23 Table A.2 Minimum p
19、roduct testing frequencies for the reaction to fire characteristics 25 Table C.1 Increments for calculating the aged value of thermal conductivity . 36 Table C.2 Increments for calculating the aged value of thermal conductivity Tmean= - 120 C 36 BS EN 14308:2009+A1:2013EN 14308:2009+A1:2013 (E)Copyr
20、ight European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 14308:2009+A1:2013 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbrev
21、iated terms .7 4 Requirements 11 5 Test methods . 17 6 Designation code 20 7 Evaluation of conformity 21 8 Marking and labelling . 22 Annex A (normative) Factory production control . 23 Annex B (normative) Determination of minimum service temperature 27 Annex C (normative) Determination of the aged
22、value of thermal conductivity and thermal resistance 33 Annex D (informative) Additional properties . 41 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 43 Bibliography . 51 Figures Figure B.1 Dimensions of test specimens
23、 32 Figure C.1 Flow chart of the alternative ageing procedures 34 Figure ZA.1 Example of CE marking information 50 Tables Table 1 Dimensional tolerances 12 Table 2 Levels for dimensional stability . 13 Table 3 Levels for compressive stress or compressive strength 15 Table 4 Test methods, test specim
24、ens and conditions. 18 Table A.1 Minimum product testing frequencies . 23 Table A.2 Minimum product testing frequencies for the reaction to fire characteristics 25 Table C.1 Increments for calculating the aged value of thermal conductivity . 36 Table C.2 Increments for calculating the aged value of
25、thermal conductivity Tmean= - 120 C 36 EN 14308:2009+A1:2013 (E) 3 Table C.3 Increments for calculating the aged value of thermal conductivity Tmean= + 10 C 37 Table C.4 Increments for calculating the aged value of thermal conductivity Tmean= + 120 C 37 Table C.5 Safety increments to be added to the
26、 measured accelerated aged value of thermal conductivity . 39 Table D.1 Test methods, test specimens, conditions and minimum testing frequencies . 42 Table ZA.1 Relevant clauses. 44 Table ZA.2 System(s) of attestation of conformity . 45 Table ZA.3 Assignment of evaluation of conformity tasks for pro
27、ducts under system 1 . 46 Table ZA.4 Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire . 47 BS EN 14308:2009+A1:2013EN 14308:2009+A1:2013 (E)Copyright European Committee for Standardization Provided by IHS under license w
28、ith CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 14308:2009+A1:2013 (E) 4 Foreword This document (EN 14308:2009+A1:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN
29、. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of th
30、e elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14308:2009. This document includes Amendment 1 approved by CEN on 2012-11-11. The start and finish of text intr
31、oduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive 89/1
32、06/EEC, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the pr
33、ovisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains five annexes: Annex A (normative), Factory production control A
34、nnex B (normative), Determination of minimum service temperature Annex C (normative), Determination of the aged value of thermal conductivity Annex D (normative), Additional properties Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products
35、 Directive This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN
36、/TC 88 have proposed defining the standards listed below as a package of European standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European standards of this package. The package of standards comprises the following group o
37、f interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: BS EN 14308:2009+A1:2013EN 14308:2009+A1:2013 (E)Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo repro
38、duction or networking permitted without license from IHS-,-,-EN 14308:2009+A1:2013 (E) 4 Foreword This document (EN 14308:2009+A1:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shal
39、l be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document m
40、ay be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14308:2009. This document includes Amendment 1 approved by CEN on 2012-11-11. The start and finish of text introduced or altered by amendmen
41、t is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive 89/106/EEC, see informative Annex
42、 ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if
43、this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains five annexes: Annex A (normative), Factory production control Annex B (normative), Determina
44、tion of minimum service temperature Annex C (normative), Determination of the aged value of thermal conductivity Annex D (normative), Additional properties Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Directive This document incl
45、udes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining
46、 the standards listed below as a package of European standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European standards of this package. The package of standards comprises the following group of interrelated standards for
47、the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14308:2009+A1:2013 (E) 5 EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Therm
48、al insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specificatio
