1、 ETSI EN 301 502 V12.5.1 (2016-07) Global System for Mobile communications (GSM); Base Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 502 V12.5.1 (2016-07) 2 Reference REN/MSG-00
2、19-RED Keywords base station, cellular, ER-GSM, GSM, R-GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Impor
3、tant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written
4、authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document sh
5、ould be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the f
6、ollowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the P
7、DF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI
8、 registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 502 V12.5.1 (2016-07) 3 Contents In
9、tellectual Property Rights 7g3Foreword . 7g3Modal verbs terminology 7g3Introduction 7g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 9g33 Definitions, symbols and abbreviations . 10g33.1 Definitions 10g33.2 Symbols 13g33.3 Abbreviations . 13g34 Technical require
10、ments specifications . 14g34.1 Environmental profile . 14g34.2 Conformance requirements 15g34.2.0 General 15g34.2.1 Introduction. 15g34.2.2 Mean transmitted RF carrier power 16g34.2.2.1 Definition 16g34.2.2.2 Limit 16g34.2.2.3 Conformance . 17g34.2.3 Void 17g34.2.4 Adjacent channel power 17g34.2.4.0
11、 General 17g34.2.4.1 Spectrum due to modulation and wideband noise . 17g34.2.4.1.1 Definition. 17g34.2.4.1.2 Limit 17g34.2.4.1.3 Conformance . 19g34.2.4.2 Switching transients spectrum . 20g34.2.4.2.1 Definition. 20g34.2.4.2.2 Limit 20g34.2.4.2.3 Conformance . 20g34.2.5 Spurious emissions from the t
12、ransmitter antenna connector . 20g34.2.5.0 General 20g34.2.5.1 Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit band . 20g34.2.5.1.1 Definition. 20g34.2.5.1.2 Limit 20g34.2.5.1.3 Conformance . 20g34.2.5.2 Conducted spurious emissions from the transmitter a
13、ntenna connector, outside the BTS transmit band . 21g34.2.5.2.0 General 21g34.2.5.2.1 Definition. 21g34.2.5.2.2 Limit 21g34.2.5.2.3 Conformance . 22g34.2.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the BTS transmit band 22g34.2.5.3.0 General 22g34.2.5
14、.3.1 Definition. 22g34.2.5.3.2 Limit 22g34.2.5.3.3 Conformance . 22g34.2.6 Intermodulation attenuation 22g34.2.6.1 Definition 22g34.2.6.2 Limit 23g3ETSI ETSI EN 301 502 V12.5.1 (2016-07) 4 4.2.6.2.1 For BTS not belonging to a multicarrier BTS class . 23g34.2.6.2.2 For BTS belonging to a multicarrier
15、 BTS class . 23g34.2.6.3 Conformance . 23g34.2.7 Intra Base Station System intermodulation attenuation 24g34.2.7.1 Definition 24g34.2.7.2 Limit 24g34.2.7.2.1 For BTS not belonging to a multicarrier BTS class . 24g34.2.7.2.2 For BTS belonging to a multicarrier BTS class . 24g34.2.7.3 Conformance . 24
16、g34.2.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 24g34.2.8.1 Definition 24g34.2.8.2 Limit 24g34.2.9 Static Reference Sensitivity Level 26g34.2.9.1 Definition 26g34.2.9.2 Limit 26g34.2.9.3 Conformance . 27g34.2.10 Void 27g34.2.11 Reference Interference Leve
17、l 27g34.2.11.1 Definition 27g34.2.11.2 Limit 27g34.2.11.3 Conformance . 33g34.2.12 Blocking Characteristics . 33g34.2.12.0 General 33g34.2.12.1 Definition 34g34.2.12.2 Limit 34g34.2.12.2.1 Blocking 34g34.2.12.2.2 Spurious response 35g34.2.12.3 Conformance . 35g34.2.13 Intermodulation characteristics
18、 . 35g34.2.13.1 Definition 35g34.2.13.2 Limit 35g34.2.13.3 Conformance . 35g34.2.14 AM suppression 35g34.2.14.1 Definition 35g34.2.14.2 Limit 35g34.2.14.3 Conformance . 36g34.2.15 Spurious emissions from the receiver antenna connector . 36g34.2.15.0 General 36g34.2.15.1 Definition 36g34.2.15.2 Limit
19、 36g34.2.15.3 Conformance . 36g34.2.16 Radiated spurious emissions . 36g34.2.16.0 General 36g34.2.16.1 Definition 36g34.2.16.2 Limit 36g34.2.16.3 Conformance . 36g35 Testing for compliance with technical requirements 37g35.1 Environmental conditions for testing . 37g35.2 Interpretation of the measur
20、ement results 37g35.3 Essential radio test suites 38g35.3.0 General 38g35.3.1 Void 38g35.3.2 Mean transmitted RF carrier power 38g35.3.2.1 Test case 38g35.3.2.2 Test Environment 39g35.3.3 Void 39g35.3.4 Adjacent channel power 39g35.3.4.1 Spectrum due to modulation and wideband noise . 39g35.3.4.1.1
21、Test case 39g35.3.4.1.2 Test Environment 40g35.3.4.2 Switching transients spectrum . 40g3ETSI ETSI EN 301 502 V12.5.1 (2016-07) 5 5.3.4.2.1 Test case 40g35.3.4.2.2 Test Environment 41g35.3.5 Spurious emissions from the transmitter antenna connector . 42g35.3.5.1 Conducted spurious emissions from the
22、 transmitter antenna connector, inside the BTS transmit band . 42g35.3.5.1.1 Test case 42g35.3.5.1.2 Test Environment 42g35.3.5.2 Conducted spurious emissions from the transmitter antenna connector, outside the BTS transmit band . 42g35.3.5.2.0 General 42g35.3.5.2.1 For BTS not belonging to a multic
23、arrier BTS class . 42g35.3.5.2.2 For BTS belonging to a multicarrier BTS class . 43g35.3.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the BTS transmit band 45g35.3.5.3.0 General 45g35.3.5.3.1 Test case 45g35.3.5.3.2 Test Environment 46g35.3.6 Intermodu
24、lation attenuation 46g35.3.6.1 Test case 46g35.3.6.2 Test Environment 47g35.3.7 Intra Base Station System intermodulation attenuation 48g35.3.7.1 Test case 48g35.3.7.2 Test Environment 49g35.3.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 49g35.3.8.1 Test cas
25、e 49g35.3.8.2 Test Environment 51g35.3.9 Static reference sensitivity level . 51g35.3.9.1 Test case 51g35.3.9.2 Test Environment 53g35.3.10 Void 53g35.3.11 Reference Interference Level 53g35.3.11.1 Test case 53g35.3.11.2 Test Environment 61g35.3.12 Blocking Characteristics . 61g35.3.12.0 General 61g
26、35.3.12.1 Test case 61g35.3.12.2 Test Environment 67g35.3.13 Intermodulation characteristics . 67g35.3.13.1 Test case 67g35.3.13.2 Test Environment 68g35.3.14 AM suppression 68g35.3.14.1 Test case 68g35.3.14.2 Test Environment 70g35.3.15 Spurious emissions from the receiver antenna connector . 70g35
27、.3.15.0 General 70g35.3.15.1 Test case 70g35.3.15.2 Test Environment 70g35.3.16 Radiated spurious emissions . 71g35.3.16.0 General 71g35.3.16.1 Test case 72g35.3.16.2 Test Environment 73g3Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/
28、53/EU . 74g3Annex B (normative): General test conditions and declarations . 76g3B.1 Declaration by manufacturer 76g3B.1.0 General . 76g3B.1.1 Output power and determination of power class 76g3B.1.2 Specified frequency range 77g3B.1.3 Frequency hopping . 77g3ETSI ETSI EN 301 502 V12.5.1 (2016-07) 6 B
29、.1.4 Void 77g3B.1.5 Downlink discontinuous transmission (DTX) 77g3B.2 BTS Configurations 78g3B.2.0 General . 78g3B.2.1 Receiver diversity . 78g3B.2.2 Duplexers . 78g3B.2.3 Power supply options . 79g3B.2.4 Ancillary RF amplifiers 79g3B.2.5 BSS using antenna arrays . 80g3B.2.6 BTS supporting 8-PSK mod
30、ulation 81g3B.2.7 BTS supporting additional modulations in EGPRS2 81g3B.2.8 Supported Symbol Rate 81g3B.2.9 Support of RTTI and/or FANR 81g3B.2.10 Multicarrier BTS 82g3B.2.11 BTS supporting VAMOS . 83g3B.2.12 BTS supporting ER-GSM 83g3Annex C (normative): Test environments 84g3C.0 General . 84g3C.1
31、Normal test environment 84g3C.2 Extreme test environment . 84g3C.2.0 General . 84g3C.2.1 Extreme temperature 84g3C.3 Void 85g3C.4 Power supply 85g3Annex D (informative): Void . 86g3Annex E (informative): Change History. 87g3History 88g3ETSI ETSI EN 301 502 V12.5.1 (2016-07) 7 Intellectual Property R
32、ights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essenti
33、al, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out
34、 by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical
35、Committee Mobile Standards Group (MSG). For non EU countries the present document may be used for regulatory (Type Approval) purposes. The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.10 to provide one voluntary means of conforming to the esse
36、ntial requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that Direct
37、ive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. National transposition
38、dates Date of adoption of this EN: 20 April 2016 Date of latest announcement of this EN (doa): 31 July 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 January 2017 Date of withdrawal of any conflicting National Standard (dow): 31 January 2018 Modal verb
39、s terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT all
40、owed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the Radio Equipment Directive i.1. The present document is pro
41、duced following the guidance in ETSI EG 203 336 i.2 as applicable. ETSI ETSI EN 301 502 V12.5.1 (2016-07) 8 1 Scope The present document applies to the following radio equipment type: 1) GSM base stations. Table 1-1: GSM Base Station System frequency bands GSM band Direction of transmission GSM Base
42、 Station System relevant frequency bands P-GSM 900 Transmit 935 MHz to 960 MHz Receive 890 MHz to 915 MHz E-GSM 900 Transmit 925 MHz to 960 MHz Receive 880 MHz to 915 MHz R-GSM 900 Transmit 921 MHz to 960 MHz Receive 876 MHz to 915 MHz ER-GSM 900 Transmit 918 MHz to 960 MHz Receive 873 MHz to 915 MH
43、z DCS 1 800 Transmit 1 805 MHz to 1 880 MHz Receive 1 710 MHz to 1 785 MHz GSM 450 Transmit 460,4 MHz to 467,6 MHz Receive 450,4 MHz to 457,6 MHz GSM 480 Transmit 488,8 MHz to 496 MHz Receive 478,8 MHz to 486 MHz The present document contains requirements to demonstrate that that radio equipment bot
44、h effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference. In regards to interference to systems operating in adjacent bands guidance for single carrier BTS and multicarrier BTS is provided in ECC Report 146 i.3. 2 References 2.1 Normative references
45、References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenc
46、ed documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced doc
47、uments are necessary for the application of the present document. 1 ETSI EN 301 908-18 (V11.1.1) (07-2016): “IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Radio Equipment Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Ra
48、dio (MSR) Base Station (BS)“. 2 ETSI TS 151 021 (V12.3.0) (01-2015): “Digital cellular telecommunications system (Phase 2+); Base Station System (BSS) equipment specification; Radio aspects (3GPP TS 51.021 version 12.3.0 Release 12)“. 3 ETSI TS 145 002 (V12.4.0) (04-2015): “Digital cellular telecomm
49、unications system (Phase 2+); Multiplexing and multiple access on the radio path (3GPP TS 45.002 version 12.4.0 Release 12)“. 4 ETSI TS 145 004 (V12.0.0) (10-2014): “Digital cellular telecommunications system (Phase 2+); Modulation (3GPP TS 45.004 version 12.0.0 Release 12)“. ETSI ETSI EN 301 502 V12.5.1 (2016-07) 9 5 ETSI TS 145 005 (V12.5.0) (04-2015): “Digital cellular telecommunications system (Phase 2+); Radio Transmission and reception (3GPP TS 45.005 version 12.5.0 Release 12)“. 6 ETSI TS 145 010 (V12.0.0) (10-2014): “Digital cellular telecommuni
