1、 ETSI TS 1TelecommHome enhanced Node Maintenance Concepts and requiremeManage(3GPP TS 32.5TECHNICAL SPECIFICATION132 591 V13.0.1 (2017LTE; munication management; e B (HeNB) Operations, Admine and Provisioning (OAMments for Type 1 interface HeNgement System (HeMS) .591 version 13.0.1 Release 1317-01)
2、 inistration, P); eNB to HeNB 13) ETSI ETSI TS 132 591 V13.0.1 (2017-01)13GPP TS 32.591 version 13.0.1 Release 13Reference RTS/TSGS-0532591vd01 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 -
3、NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electro
4、nic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF)
5、version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverab
6、leStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including p
7、hotocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institu
8、te 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks
9、 registered and owned by the GSM Association. ETSI ETSI TS 132 591 V13.0.1 (2017-01)23GPP TS 32.591 version 13.0.1 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs
10、, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are avai
11、lable on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which ar
12、e, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM id
13、entities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“
14、, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI
15、ETSI TS 132 591 V13.0.1 (2017-01)33GPP TS 32.591 version 13.0.1 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 5g34 Concep
16、ts and background 6g35 Business level requirements . 6g35.1 Requirements 6g35.1.1 Configuration Management 6g35.1.2 Performance Management 7g35.1.3 Fault Management 7g35.1.4 Security Management . 7g35.2 Actor roles 7g35.3 Telecommunications resources 7g35.4 High level use cases . 7g35.4.1 HeNB Energ
17、y Saving use cases 7g36 Specification level requirements 8g36.1 Requirements 8g36.1.1 Configuration Management 8g36.1.2 Performance Management 9g36.1.3 Fault Management 9g36.1.4 Security Management . 10g36.2 Actor roles 11g36.3 Telecommunications resources 11g36.4 Use cases 11g36.4.1 Energy saving a
18、ctivation on selected network elements (Centralized ES) . 11g36.4.2 Deactivation of energy saving on selected network elements (Centralized ES ) 12g36.4.3 Energy saving activation on selected network elements (Distributed ES) 13g36.4.4 Energy saving deactivation on selected network elements (Distrib
19、uted ES) 14g3Annex A (informative): Energy Saving use cases for HeNB . 15g3A.1 UC1a: Capacity-Limited Networks 15g3A.2 UC 1b: Hybrid E-UTRAN Macro Cell and HeNB Cell Coverage . 16g3Annex B (informative): Change history . 18g3History 19g3ETSI ETSI TS 132 591 V13.0.1 (2017-01)43GPP TS 32.591 version 1
20、3.0.1 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present
21、document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change
22、control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document is part of a TS-family covering the
23、3rdGeneration Partnership Project Technical Specification Group Services and System Aspects, Telecommunication Management; as identified below: 3GPP TS 32.591: “Telecommunications management; Home eNode B (HeNB) Operations, Administration, Maintenance and Provisioning (OAM Concepts and requirements
24、for Type 1 interface HeNB to HeNB Management System (HeMS)“. 3GPP TS 32.592: “Telecommunications management; Home eNode B (HeNB) Operations, Administration, Maintenance and Provisioning (OAM Information model for Type 1 interface HeNB to HeNB Management System (HeMS) “. 3GPP TS 32.593: “Telecommunic
25、ations management; Home eNode B (HeNB) Operations, Administration, Maintenance and Provisioning (OAM Procedure flows for Type 1 interface HeNB to HeNB Management System (HeMS)“. 3GPP TS 32.594: “Telecommunications management; Home eNode B (HeNB) Operations, Administration, Maintenance and Provisioni
26、ng (OAM Data definitions for Type 1 interface HeNB to HeNB Management System (HeMS)“. ETSI ETSI TS 132 591 V13.0.1 (2017-01)53GPP TS 32.591 version 13.0.1 Release 131 Scope The present document describes the concepts and requirements of OAM for Home eNodeB (HeNB). The requirements captured in this d
27、ocument shall be met via Type 1 interface between HeNB and HeMS. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version nu
28、mber, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that docum
29、ent in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 32.101: “Telecommunication management; Principles and high level requirements“. 3 3GPP TS 32.102: “Telecommunication management; Architecture“. 4 TR-069 Amendment 2, CPE WAN Management
30、Protocol v1.1, Broadband Forum. 5 3GPP TS 32.435: “Performance Measurement, eXtensible Markup Language (XML) file format definition“. 6 3GPP TS 32.111-2: “Telecommunication management; Fault Management; Alarm Integration Reference Point (IRP): Information Service (IS) “. 7 3GPP TS 22.220: “ Service
31、requirements for Home Node B (HNB) and Home eNode B (HeNB)“. 8 3GPP TS 33.320: “Security of Home Node B (HNB) / Home evolved Node B (HeNB)“. 9 3GPP TS 32.551: “ Energy Saving Management (ESM); Concepts and requirements “. 10 3GPP TR 32.826: “ Study on Energy Savings Management (ESM) “. 3 Definitions
32、 and abbreviations For the purposes of the present document, the terms and definitions given in TS 32.101 2, TS 32.102 3 and TS 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TS 32.101 2, TS 32.102 3 and TS 2
33、1.905 1, in that order. 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. 3.2 Abbreviations For the pu
34、rposes of the present document, the following abbreviations apply: HeMS Home eNodeB Management System ETSI ETSI TS 132 591 V13.0.1 (2017-01)63GPP TS 32.591 version 13.0.1 Release 13HeNB Home eNodeB 4 Concepts and background Home eNodeB has the following characteristics: - The quantity of Home eNodeB
35、s is likely to be large - There may be many Home eNodeB vendors - The location of Home eNodeB could be in a private residence which may not be accessible for frequent on-site maintenance Based on the above characteristics, this specification defines the functionalities needed for the management of H
36、ome eNodeB over a Type 1 interface. 5 Business level requirements 5.1 Requirements 5.1.1 Configuration Management REQ-OAMP_CM-CON-001 The HeNB shall be able to automatically, i.e. without human operator on-line interaction or attention, configure itself to be ready for service when powered up and co
37、nnected to HeMS. REQ-OAMP_CM-CON-002 The HeNB shall be able to automatically, i.e. without human operator on-line interaction or attention, configure itself to be in service when powered up and connected to HeMS. REQ-OAMP_CM-CON-003 The HeNB shall be able to automatically, i.e. without human operato
38、r on-line interaction or attention, upgrade its software/firmware and configuration. REQ-OAMP_CM-CON-004 The HeNB auto-configuration shall be done in such way that the performance of the surrounding macro cells is not adversely affected. REQ-OAMP_CM-CON-005 The HeNB auto-configuration function shoul
39、d be adaptive to react to change in the network and changes in the radio environment. REQ-OAMP_CM-CON-006 The operator shall be able to remotely reboot the HeNB. REQ-OAMP_CM-CON-007 The operator shall be able to remotely start/stop the radio transmission of the HeNB. REQ-OAMP_CM-CON-008 In case IPse
40、c is used, the system should be engineered to ensure that the HeNB IP address changes as minimally as possible. REQ-OAMP_CM-CON-009 The operator shall be able to remotely reconfigure the frequency and radio bandwidth of HeNB to adapt to changes in the radio environment and required bandwidth. REQ-OA
41、MP_CM-CON-010 The HeNB should allow configuration of the IPsec or non-IPsec usage option based on the operator“s policy 8. REQ-OAMP_CM-CON-011 The operator shall be able to activate/deactivate energy savings on one or multiple HeNBs in the network 910. REQ-OAMP_CM-CON-012 The operator shall be able
42、to configure energy saving policy for the one or more HeNBs in the network 910. ETSI ETSI TS 132 591 V13.0.1 (2017-01)73GPP TS 32.591 version 13.0.1 Release 135.1.2 Performance Management REQ-OAMP_PM-CON-001 The HeNB may have the capability to collect its performance related data. REQ-OAMP_PM-CON-00
43、2 The HeNB shall send performance data based on operator configured policy. REQ-OAMP_PM-CON-003 Operator shall be able to retrieve performance data file from the HeNB. 5.1.3 Fault Management REQ-OAMP_FM-CON-001 The HeNB shall support Fault Management to enable the operator to monitor and manage the
44、HeNB. REQ-OAMP_FM-CON-002 The HeNB shall provide alarm related information only on demand by the operator or based on operator configured policy. 5.1.4 Security Management REQ-OAMP_SM-CON-001 The HeNB shall have the capability to protect itself against Denial of Service attack over the Type 1 interf
45、ace. 5.2 Actor roles Not defined in this version. 5.3 Telecommunications resources Not defined in this version. 5.4 High level use cases 5.4.1 HeNB Energy Saving use cases UC1a: Capacity-Limited Networks Capacity-limited networks are normally dimensioned to cope with peak time traffic demand and can
46、 hence be under-utilized in off-peak times peak time traffic demand e.g. at certain hours of the night, when the overall load as well as the load distribution onto the different cells may differ significantly from peak times. For energy saving management in such networks, the objective is therefore
47、to adapt the network to these changing conditions by activating energy saving on selected cells. One approach is to concentrate the load into a few selected cells that remain active during low traffic demand periods with increased coverage area and to deactivate the remaining less loaded cells. UC1b
48、: Hybrid E-UTRAN Macro Cell and HeNB Cell Coverage A variation of the above use case is to have all cells in the building can be shut down. The overlay macro cell can provide coverage for all the HeNBs in that area. Depending on the architecture, energy saving decisions and corresponding state trans
49、fers are made by network elements (or element / domain managers) or by network management systems. ETSI ETSI TS 132 591 V13.0.1 (2017-01)83GPP TS 32.591 version 13.0.1 Release 136 Specification level requirements 6.1 Requirements 6.1.1 Configuration Management The requirements for configuration management are as follows: REQ-OAMP_CM-FUN-001 The HeNB configuration shall be administered by the HeMS utilising the TR-069 CWMP Protocol, reference 4. REQ-OAMP_CM-FUN-002 HeMS shall be able to reboot the HeNB. REQ-OAMP_CM-FUN-003
