1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 03 2012 04 05 N Status No usage or replacement N. Benipal, NA 2004 03 25 Revised Para 3.0 inserted; paras 3.12 and 4 deleted 1963 09 02 Released CAS3-115563-1 Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC P
2、age 1 of 2 OIL, SOLUBLE - PETROLEUM BASE ESE-M7C32-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material desired by this specification is a petroleum base soluble oil concentrate which is mixed with water and/or anti-freeze. 2. APPLICATION This specification was released originally for oil used to p
3、rovide water pump seal lubrication in automotive cooling systems. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 FLASH POINT, min 149 C (ASTM D
4、92) 3.2 GRAVITY (API) 18 - 20 (ASTM D 287) 3.3 POUR POINT, max -1 C (ASTM D 97) 3.4 MOISTURE, max 3.5% (ASTM D 95) 3.5 ASH 1.7 - 2.2% (ASTM D 482) 3.6 ALKALINITY (AS NaOH) 0.05 - 0.10% (ASTM D 128) 3.7 PETROLEUM SOAP (ASTM D 855) 3.7.1 Sodium Sulfonate, max 4% 3.7.2 Carboxylate Soap, min 7% 3.7.3 Co
5、mbined Petroleum Soap, min 10% 3.8 EMULSIFIABILITY Must pass test (FLTM BT 101-01) ENGINEERING MATERIAL SPECIFICATION ESE-M7C32-A Copyright 2012, Ford Global Technologies, LLC Page 2 of 2 3.9 FOAMING (FLTM BT 101-01) 3.9.1 Immediately After 5 min stirring, max 1 in (25 mm) 3.9.2 After Standing 10 min, max 1/4 in (6.0 mm) 3.10 RUST PREVENTION Must pass test (FLTM BT 002-01) 3.11 ANILINE POINT, min 72 C (ASTM D 611)
