1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 05 22 Activated M. Dumitrescu Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 2 FABRIC, SMALL TAG PATTERN, FLAT WOVEN WSS-M1H1084-A 1. SCOPE The material defined by this specification is a SMALL TAG
2、 pattern, flat Jacquard woven bodycloth of good quality and uniform composition. The fabric is backcoated. 2. APPLICATION This specification was released originally for material used as a seat fabric, bolster application for 2008 C170, Focus. 3. REQUIREMENTS Material specification requirements are t
3、o be used for initial qualification of materials. In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For
4、 Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 279 ends/10 cm Fill 213 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric w/backcoat 313 g/m23.3 COMPOSITION (ASTM D 629) Tolerance as specified in WS
5、S-M8P18-A1/A4. Fabric 100% Polyester Backcoating Acrylic latex ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1084-A Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp A. 16.7 tex f36 (textured semi-dull polyester) x 2 Fill W 16.7 tex f34 (textured, semi-dull polyester) x 3 X 16.7 tex f48 (textured, solution dye polyester) x 2 3.5 METHOD OF DYEING piece dye/solution dye 3.6 FINISHING OPERATIONS woven, wash, dye, backcoated
