INTA 12 31 21 《铝轻合金锻造铝，铜，镁4 2栏杆和锻造型花饰》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C142 C142M-2017 Standard Test Method for Clay Lumps and Friable Particles in Aggregates《集料中泥块和易碎颗粒的标准试验方法》.pdf

ASTM C142-1997(2004) Standard Test Method for Clay Lumps and Friable Particles in Aggregates《集料中的土块和易碎颗粒含量的标准试验方法》.pdf

ASTM C1421-2001b(2007) Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature《测定室温下高级陶瓷断裂韧性的标准试验方法》.pdf

ASTM C1421-2009 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature《室温下高级陶瓷断裂韧性测定的标准试验方法》.pdf

ASTM C1421-2010 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature《室温下高级陶瓷断裂韧性测定的标准试验方法》.pdf

ASTM C1421-2015 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature《在环境温度下测定高级陶瓷断裂韧性的标准试验方法》.pdf

ASTM C1421-2016 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature《环境温度条件下测定先进陶瓷断裂韧度的标准试验方法》.pdf

ASTM C1421-2018 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature《环境温度条件下测定先进陶瓷断裂韧度的标准试验方法》.pdf

ASTM C1422 C1422M-2010 Standard Specification for Chemically Strengthened Flat Glass《化学强化平板玻璃标准规范》.pdf