ITU-R SM 1448-2000 DETERMINATION OF THE COORDINATION AREA AROUND AN EARTH STATION IN THE FREQUENCY BANDS BETWEEN 100 MHz AND 105 GHz (Covering Note 08 30 2002)《在频段100MHz到105GHz之间一个.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D2559-2010a Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions《室外潮湿环境中层压结构木制品用胶粘剂的标准规范》.pdf

ASTM D2559-2012a Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions 《室外暴露条件中层压结构木制品用胶粘剂的标准规格》.pdf

ASTM D2559-2012a(2018) Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions.pdf

ASTM D2559-2012ae1 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions《室外暴露环境中胶粘结构木制品用粘合剂的标准规格》.pdf

ASTM D2561-1995(2005) Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers《吹模制聚乙烯容器抗环境应力裂纹的标准试验方法》.pdf

ASTM D2561-2012 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers《吹模制聚乙烯容器抗环境应力裂纹的标准试验方法》.pdf

ASTM D2561-2017 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers《吹模制聚乙烯容器抗环境应力裂纹的标准试验方法》.pdf

ASTM D2562-1994(2002)e1 Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics《增强热固塑料模制部件中可视缺陷的分类的标准操作规程》.pdf

ASTM D2562-1994(2008) Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics《增强热固塑料模制部件可见缺陷分类的标准实施规程》.pdf