JUS H G8 341-1988 Reagents Zine cbloride Deterainaticm of -zine oxide chloride ctmteut Volumctric method《试剂 氯化锌 氧化锌和氯化锌含量的测定 体积法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 2248-3-2008 Geometrical product specifications (GPS) - GO gauging members - Part 3 For holes over 120 mm up to 200 mm nominal diameter《产品几何量技术规范(GPS) 过端量规体 第3部分 标称直径120～200mm.pdf

DIN 2249-1-2000 Verification of geometrical parameters - NOT GO gauging members - Part 1 For holes from 1 mm up to 40 mm nominal diameter《几何参数的验证 不过端量规 第1部分 标称直径1mm至40mm的孔用不过端量规》.pdf

DIN 2249-2-2008 Geometrical product specifications (GPS) - NOT GO gauging members - Part 2 Rod gauge for holes over 40 mm up to 500 mm nominal diameter《产品几何量技术规范(GPS) 不过端塞规 第2部分 .pdf

DIN 2249-3-2008 Geometrical product specifications (GPS) - NOT GO gauging members - Part 3 Segmental cylindrical gauging members for holes over 120 mm up to 200 mm nominal diamet.pdf

DIN 2249-4-2008 Geometrical product specifications (GPS) - NOT GO gauging members - Part 4 Cylindrical gauging members for holes over 40 mm up to 120 mm nominal diameter《产品几何量技术规.pdf

DIN 2250-1-2008 Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 1 From 1 mm up to 315 mm nominal diameter《产品几何量技术规范(GPS) 过端环规和定位环规 第1部分 1mm.pdf

DIN 2253-2006 Geometrical product specifications (GPS) - Reference gauges for gap gauges from 1 mm to 315 mm nominal size《产品几何量技术规范(GPS) 1mm～315mm标称尺寸厚度基准量规》.pdf

DIN 2254-1-1995 Verification of geometrical parameters - NOT GO ring gauges - Part 1 Nominal diameter from 1 mm up to 315 mm general purpose《几何参数的鉴定 不过端环规 第1部分 公称直径范围为 1 mm - 315 m.pdf

DIN 2258-1986 Graphical symbols for dimensional metrology《尺寸计量的图形符号》.pdf