JUS M E3 482-1990 Mechanical contrcl damgers Safety requirements and testings《机械控制阻尼器 安全要求及测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1680-2011 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems《通过外部金属屋面板系统空气泄漏率的标准试验方法》.pdf

ASTM E1680-2016 Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems《外部金属屋顶面板系统漏气率的标准试验方法》.pdf

ASTM E1681-2003 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials《测定金属材料环境致裂的界限应力强度因子的标准试验方法》.pdf

ASTM E1681-2003(2008) Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials.pdf

ASTM E1681-2003(2008)e1 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials《测定金属材料环境致裂的界限应力强度因子的标准试验方法》.pdf

ASTM E1681-2003(2008)e2 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials《金属材料环境致裂临界应力强度因素测定的标准试验方法》.pdf

ASTM E1681-2003(2013) Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials《测定金属材料环境致裂的界限应力强度因子的标准试验方法》.pdf

ASTM E1682-2005 Standard Guide for Modeling the Colorimetric Properties of a Visual Display Unit《直观显示装置比色特性模拟的标准指南》.pdf

ASTM E1682-2008 Standard Guide for Modeling the Colorimetric Properties of a CRT-Type Visual Display Unit《阴极射线管式(CRT)视觉显示装置的色度性能建模的标准指南》.pdf