1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 3 NAVISTAR, INC. Material, Parts, and Process Specifications (
2、MPAPS) NUMBER: MPAPS S-R-4.601-GI Former Designation: ESP-R-4.601-GI TITLE: Rectangular Sealed Beam Headlamps General Information CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-R-4.601-GI - April 2002 PRINTED COPIES O
3、F THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health pract
4、ices and to determine the applicability of regulatory limits prior to use. Change Notice: Changed to New MPAPS format. 1.0 RESTRICTED CHEMICAL SUBSTANCES: Effective January 1, 2007, all product supplied to the requirements of this specification must comply with the requirements of the MPAPS B-50 spe
5、cification. 2.0 DIMENSION: Type 1A may be seen on page 3 of this document. NUMBER: MPAPS S-R-4.601-GI TITLE: Rectangular Sealed Beam Headlamps REVISION: 1506 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Su
6、ppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 2 of 3 NUMBER: MPAPS S-R-4.601-GI TITLE: Rectangular Sealed Beam Headlamps REVISION: 1506 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate
7、Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 3 of 3 RECTANGULAR SEALED BEAM HEADLAMP 4 X 6-1/2 in (100 x 165 mm) TYPE IA THIS SEALED BEAM HEADLAMP UNIT SAME AS TYPE 2A EXCEPT AS SHOWN. 3.0 TECHNICAL INFORMATION: For further informa
8、tion related to the technical content of this specification, contact: Suppliers may purchase controlled copies of this specification by contacting: Materials Engineering and Technology Dept. 10400 W. North Avenue Melrose Park, IL 60160 E-mail: MaterialsEngineeringN IHS Global Inc. 15 Inverness Way East Englewood CO 80112-5776 Phone: 1-800-854-7179 E-mail: AutomotiveIHS.com Website: http:/
