NF A09-020-11-2007 Non-destructive testing - Terminology - Part 11 Terms used in X-ray diffraction from polycrystalline and amorphous materials 《无损检测 术语 第11部分 多结晶和非结晶材料中X射线衍射用术语》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4672-2012 Standard Test Method for Polyurethane Raw Materials Determination of Water Content of Polyols 《聚氨酯原材料的标准试验方法 多元醇含水量的测定》.pdf

ASTM D4672-2018 Standard Test Method for Polyurethane Raw Materials Determination of Water Content of Polyols 《聚氨酯原材料的标准试验方法 多元醇含水量的测定》.pdf

ASTM D4673-2002 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials《丙烯腈-丁二烯-苯乙烯(ABS)塑料及合金模压和挤压材料的标准分类系统》.pdf

ASTM D4673-2002(2008) Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials《丙烯腈-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料的标准分类系.pdf

ASTM D4673-2016 Standard Classification System for and Basis for Specification for Acrylonitrile&x2013 Butadiene&x2013 Styrene (ABS) Plastics and Alloys Molding and Extrusion Mater.pdf

ASTM D4674-2002a Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments《暴露在室内荧光灯和透窗入室日光下的塑料颜色稳定性加速试验的标准试验方法》.pdf

ASTM D4674-2002a(2010) Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments《暴露在室内荧光灯和透窗入室日光下的塑料颜色稳定性加速试验的标准试验方法》.pdf

ASTM D4675-2006e1 Standard Guide for Selection and Use of Flat Strapping Materials《扁平皮带材料的选择和使用标准指南》.pdf

ASTM D4675-2006e2 Standard Guide for Selection and Use of Flat Strapping Materials.pdf