NF E29-210-2007 Industrial pipework - Orifice flanges for differential pressure devices 《工业管道 差压装置用孔板法兰》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M3H138-A-2015 CARPET POLYESTER NON WOVEN FLAT NEEDLED LATEX AND EVA 244 g m2 (7 oz) MIN TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3H138-A11-2015 CARPET VIRGIN POLYESTER NON WOVEN FLAT NEEDLED LATEX BACKED MOLDABLE 305 G M2 (9 0 OZ) NOMINAL FACE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WR.pdf

FORD WSS-M3H138-A13-2016 CARPET POLYESTER NON WOVEN FLAT NEEDLED FUSED BACK MOLDABLE BACKING 267 g m2 (7 8 oz) TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3H138-A2-2008 CARPET POLYESTER FLAT NEEDLED LATEX PRECOAT POLYETHYLENE BACKCOATED TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯背涂的带乳胶预涂层的扁平针刺聚酯地毯 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSS-M3H138-A3-2008 CARPET POLYESTER FLAT NEEDLED LATEX BACKCOATED TO BE USED WITH FORD WSS-M99P1111-A 《乳胶背涂的聚酯扁平针刺地毯 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M15P32-C］》.pdf

FORD WSS-M3H138-A4-2004 CARPET POLYESTER FLAT NEEDLED FILLED POLYPROPYLENE BACKING TO BE USED WITH FORD WSS-M99P1111-A 《填充聚丙烯（PP）衬底的扁平针刺聚酯地毯 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M3H138-A5-2008 CARPET POLYESTER FLAT NEEDLED FUSED POLYETHYLENE BACKCOATED TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯背涂的熔凝型扁平针刺聚酯地毯 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD W.pdf

FORD WSS-M3H138-A9-2014 CARPET POLYESTER COLOR MATCHED NON WOVEN FLAT NEEDLED LATEX AND POLYETHYLENE BACKED MOLDABLE 300 G M2 (8 8 OZ) NOMINAL FACE TO BE USED WITH FORD WSS-M99P11.pdf

FORD WSS-M3H140-A-2004 CARPET FUSED POLYESTER DILOUR NEEDLED POLYPROPYLENE CO-POLYMER EXTRUDED BACK 320 g m2 TO BE USED WITH FORD WSS-M99P1111-A 《320 g m2的挤塑聚丙烯(PP)共聚物衬底的DILOUR针刺.pdf