NF L34-150-1977 Accessory drives and mounting pads (engine and gearbox) 《附助驱动器和安装垫 （发动机和齿轮箱）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM A1046 A1046M-2010ae1 Standard Specification for Steel Sheet Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process《热浸处理的锌铝镁合金薄钢板材的标准规格》.pdf

ASTM A1046 A1046M-2014 Standard Specification for Steel Sheet Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process《热浸处理的锌铝镁合金钢片材的标准规格》.pdf

ASTM A1046 A1046M-2016 Standard Specification for Steel Sheet Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process《用热浸工艺测定锌铝镁合金涂覆的薄钢板的标准规格》.pdf

ASTM A1046 A1046M-2017 Standard Specification for Steel Sheet Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process《用热浸工艺测定锌铝镁合金涂覆的薄钢板的标准规格》.pdf

ASTM A1046 A1046M-2017a Standard Specification for Steel Sheet Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process《用热浸工艺测定锌铝镁合金涂覆的薄钢板的标准规格》.pdf

ASTM A1047 A1047M-2005 Standard Test Method for Pneumatic Leak Testing of Tubing.pdf

ASTM A1047 A1047M-2005(2009) Standard Test Method for Pneumatic Leak Testing of Tubing《管道的气压泄漏标准试验方法》.pdf

ASTM A1047 A1047M-2005(2014) Standard Test Method for Pneumatic Leak Testing of Tubing《管道的气压泄漏标准试验方法》.pdf

ASTM A1048 A1048M-2006 Standard Specification for Pressure Vessel Forgings Alloy Steel Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service《高温工作的高强度铬钼钨合金钢压.pdf