SIS SS 2133-1990 ISO system of limits and fits ISO tolerances c8 to c12 for shafts《ISO限制和配合体系 ISO轴公差C8-C12》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 3702-1986 螺纹铣刀技术条件.pdf

HB 3703-1986 镶硬质合金刀片的焊接式外排屑深孔推镗刀d=15~40mm.pdf

HB 3704-1986 镶硬质合金刀片的机夹式外排屑深孔推镗刀d=42~50mm.pdf

HB 3705-1986 镶硬质合金刀片的机夹式外排屑深孔推镗刀d=53~150mm.pdf

HB 3706-1986 镗刀片l=27~33mm.pdf

HB 3707-1986 压坱b=7~22mm.pdf

HB 3708-1986 导条b=10~18mm.pdf

HB 3709-1986 压条b=10.2~17.2mm.pdf

HB 371-1971 调节支承.pdf