1、 IEC 61280-1-3 Edition 2.0 2010-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic communication subsystem test procedures Part 1-3: General communication subsystems Central wavelength and spectral width measurement Procdures dessai des sous-systmes de tlcommunication fibres optiques Partie
2、1-3: Sous-systmes gnraux de tlcommunication Mesure de la longueur donde centrale et de la largeur spectrale IEC 61280-1-3:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduce
3、d or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining
4、 additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit
5、et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, ut
6、ilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is
7、the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a
8、 corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and wi
9、thdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of el
10、ectronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your f
11、eedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectric
12、it, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications
13、 CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpu
14、blished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il c
15、ontient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cett
16、e publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61280-1-3 Edition 2.0 2010-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic communication subsystem test procedures Part 1-3: General communication subsystems Central wavelength and spectral width measurement Procdu
17、res dessai des sous-systmes de tlcommunication fibres optiques Partie 1-3: Sous-systmes gnraux de tlcommunication Mesure de la longueur donde centrale et de la largeur spectrale INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE Q ICS 33.180.01 PRICE CODE CODE PRIX
18、ISBN 978-2-8322-0931-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette
19、 publication via un distributeur agr. 2 61280-1-3 IEC:2010 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 3.1 Wavelength . 5 3.2 Spectral width . 6 3.3 Additional spectral characteristics . 6 4 Apparatus . 6 4.1 Calibrated optical spectrum analyzer . 6 4.2 P
20、ower supplies 7 4.3 Input signal source or modulator . 7 4.4 Test cord . 7 5 Test sample 7 6 Procedure (Method A) 7 6.1 General . 7 6.2 Setup 7 6.3 Adjustment of spectrum analyzer controls . 8 7 Procedure (Method B) 8 7.1 Setup 8 7.2 Adjustment of spectrum analyzer controls . 9 7.3 Continuous LED an
21、d SLM spectra . 9 7.4 Discrete MLM spectra 9 7.5 Continuous SLM spectra . 10 8 Calculation . 10 8.1 General . 10 8.2 Centre wavelength 10 8.3 Centroidal wavelength . 10 8.4 Peak wavelength . 11 8.5 RMS spectral width ( rms ) 11 8.6 n-dB spectral width ( n-dB ) . 11 8.7 Full-width half-maximum spectr
22、al width ( fwhm ) 11 8.8 Side-mode suppression ratio (SMSR) . 12 9 Test results 12 9.1 Required information . 12 9.2 Information to be available on request . 12 10 Example results 12 Figure 1 Example of a LED optical spectrum 13 Figure 2 Typical spectrum analyzer output for an MLM laser 15 Figure 3
23、fwhmspectral width measurement for MLM laser . 16 Figure 4 fwhmspectral width calculation for MLM laser 16 Figure 5 Peak emission wavelength and 30dBmeasurement for SLM laser 17 Table 1 Measurement points for LED spectrum from Figure 1 13 Table 2 RMS spectral characterization . 14 61280-1-3 IEC:2010
24、 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES Part 1-3: General communication subsystems Central wavelength and spectral width measurement FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardizat
25、ion comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Internatio
26、nal Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in t
27、his preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the t
28、wo organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have t
29、he form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinte
30、rpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national
31、 or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carr
32、ied out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Com
33、mittees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn
34、to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be
35、 held responsible for identifying any or all such patent rights. International Standard IEC 61280-1-3 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86. This second edition cancels and replaces the first edition published in 1998. This editi
36、on constitutes a technical revision with changes reflecting new laser technology and includes a second method modified for state of the art instrumentation. This bilingual version (2013-07) corresponds to the monolingual English version, published in 2010-03. 4 61280-1-3 IEC:2010 The text of this st
37、andard is based on the following documents: CDV Report on voting 86C/ 887/CDV 86C/ 937/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. This publication
38、 has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61280 series can be found, under the general title Fibre optic communication subsystem test procedures, on the IEC website. The committee has decided that the contents of this amendment and the base p
39、ublication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61280-1-3 IEC:2010 5 FIBRE O
40、PTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES Part 1-3: General communication subsystems Central wavelength and spectral width measurement 1 Scope This part of IEC 61280 provides definitions and measure procedures for several wavelength and spectral width properties of an optical spectrum associated
41、with a fibre optic communication subsystem, an optical transmitter, or other light sources used in the operation or test of communication subsystems. The measurement is done for the purpose of system construction and/or maintenance. In the case of communication subsystem signals, the optical transmi
42、tter is typically under modulation. NOTE Different properties may be appropriate to different spectral types, such as continuous spectra characteristic of light-emitting diodes (LEDs), and multilongitudinal-mode (MLM), multitransverse-mode (MTM) and single-longitudinal mode (SLM) spectra, characteri
43、stic of laser diodes (LDs). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies
44、. IEC 60825-1, Safety of laser products Part 1: Equipment classification and requirements IEC 62129, Calibration of optical spectrum analyzers 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 Wavelength NOTE The following wavelength terms prov
45、ide quantitative definitions for the describing the central wavelength of a spectrum. In this standard, “central wavelength” is a general category label for these terms. 3.1.1 centre wavelength 0also called “half-power mid-point”, the mean of the closest spaced half-power wavelengths in an optical s
46、pectrum, one above and one below the peak wavelength 3.1.2 half-power wavelength 3dBa wavelength corresponding to a half peak power value of the optical spectrum 6 61280-1-3 IEC:2010 3.1.3 peak wavelength pthe wavelength corresponding to the maximum power value of the optical spectrum 3.1.4 centroid
47、al wavelength cthe mean or average wavelength of an optical spectrum 3.2 Spectral width 3.2.1 root-mean-square (rms) width rmsthe square root of the second moment of the power distribution about the centroidal wavelength 3.2.2 n-dB-down width n-dBthe positive difference of the closest spaced wavelen
48、gths, one above and one below the peak wavelength p , at which the spectral power density is n dB down from its peak value 3.2.3 full-width at half-maximum fwhma special case of n-dB-down width with n = 3 3.3 Additional spectral characteristics 3.3.1 side-mode suppression ratio SMSR the ratio of the
49、 largest peak of the optical spectrum to the second largest peak, for a nominally SLM spectrum (see 8.8) 4 Apparatus 4.1 Calibrated optical spectrum analyzer This special-purpose test equipment uses a dispersive spectrophotometric method to resolve and record the optical spectral distribution. The required wavelength resolution and range depends on the type and variety of
