1、BRITISH STANDARD BS ISO/IEC 13241:1997 Information technology Telecommunications and information exchange between systems Private Integrated Services Network Inter-exchange signalling protocol Route Restriction Class additional network feature ICS 33.040.40; 35.110BSISO/IEC13241:1997 This British St
2、andard, having been prepared under the directionof the DISC Board, waspublished under the authorityof the Standards Boardand comes intoeffecton 15December1997 BSI 06-1999 ISBN 0 580 28853 6 National foreword This British Standard reproduces verbatim ISO/IEC13241:1997 and implements it as the UK nati
3、onal standard. The UK participation in its preparation was entrusted to Technical Committee IST/6, Data communications, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals
4、 for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From1 January1997, all IEC publications have the number60000 adde
5、d to the old number. For instance, IEC27-1 has been renumbered as IEC60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European p
6、ublications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary
7、provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO/IEC
8、title page, pages ii to iv, pages1 to11 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSISO/IEC13241:19
9、97 BSI 06-1999 i Contents Page National foreword Inside front cover Foreword iv Text of ISO/IEC13241 1ii blankBSISO/IEC13241:1997 ii BSI 06-1999 Contents Page Foreword iv Introduction 1 1 Scope 1 2 Conformance 1 3 Normative references 1 4 Definitions 2 4.1 External definitions 2 5 List of acronyms 2
10、 6 Signalling protocol for the support of ANF-RRC 2 6.1 ANF-RRC description 2 6.2 ANF-RRC operational requirements 2 6.2.1 Requirements on the Originating PINX 2 6.2.2 Requirements on a Transit PINX 2 6.2.3 Requirements on a Terminating PINX 2 6.2.4 Requirements on the Incoming Gateway PINX 3 6.2.5
11、Requirements on the Outgoing Gateway PINX 3 6.3 ANF-RRC coding requirements 3 6.3.1 Operations 3 6.3.2 Information elements 3 6.3.2.1 Facility information element 3 6.3.3 Messages 4 6.4 ANF-RRC state definitions 4 6.5 ANF-RRC signalling procedures 4 6.5.1 Actions at the Originating PINX 4 6.5.1.1 No
12、rmal procedures 4 6.5.1.2 Exceptional procedures 4 6.5.2 Actions at a Transit PINX 4 6.5.2.1 Normal procedures 4 6.5.2.2 Exceptional procedures 4 6.5.3 Actions at a Terminating PINX 4 6.6 ANF-RRC impact of interworking with Public ISDNs 4 6.6.1 Actions at an Incoming Gateway PINX 4 6.6.1.1 Normal pr
13、ocedures 4 6.6.1.2 Exceptional procedures 4 6.6.2 Actions at an Outgoing Gateway PINX 4 6.6.2.1 Normal procedures 4 6.6.2.2 Exceptional procedures 4 6.7 ANF-RRC impact of interworking with non-ISDNs 5 6.7.1 Actions at an Incoming Gateway PINX 5 6.7.1.1 Normal procedures 5 6.7.1.2 Exceptional procedu
14、res 5 6.7.2 Actions at an Outgoing Gateway PINX 5 6.7.2.1 Normal procedures 5 6.7.2.2 Exceptional procedures 5 6.8 Protocol interactions between ANF-RRC and other supplementary services and ANFs 5 6.8.1 Interaction with Calling Name Identification Presentation (SS-CNIP) 5 6.8.2 Interaction with Conn
15、ected Name Identification Presentation (SS-CONP) 5BSISO/IEC13241:1997 BSI 06-1999 iii Page 6.8.3 Interaction with Call Forwarding Unconditional (SS-CFU) 5 6.8.4 Interaction with Call Forwarding Busy (SS-CFB) 5 6.8.5 Interaction with Call Forwarding No Reply (SS-CFNR) 5 6.8.6 Interaction with Call De
16、flection (SS-CD) 5 6.8.7 Interaction with Call Transfer (SS-CT) 6 6.8.8 Interaction with Completion of Calls to Busy Subscriber (SS-CCBS) 6 6.8.9 Interaction with Completion of Calls on No Reply (SS-CCNR) 6 6.8.10 Interaction with Path Replacement (ANF-PR) 6 6.8.10.1 Actions at the ANF-PR Requesting
17、 PINX 6 6.8.10.2 Actions at the ANF-PR Cooperating PINX 6 6.8.10.3 Actions at a Transit PINX on the path of the new connection 6 6.8.10.4 Actions at a Transit PINX on the path of the retained connection 6 6.8.11 Interaction with Call Offer (SS-CO) 6 6.8.12 Interaction with Call Intrusion (SS-CI) 6 6
18、.8.13 Interaction with Do Not Disturb (SS-DND) 6 6.8.14 Interaction with Do Not Disturb Override (SS-DNDO) 6 6.9 ANF-RRC Parameter Values (Timers) 6 Annex A (normative) Protocol Implementation Conformance Statement (PICS) proforma 7 A.1 Introduction 7 A.2 Instructions for completing the PICS proform
19、a 7 A.2.1 General structure of the PICS proforma 7 A.2.2 Additional information 7 A.2.3 Exception information 8 A.3 PICS proforma for this International Standard 8 A.3.1 Implementation identification 8 A.3.2 Protocol summary 8 A.3.3 General 8 A.3.4 Procedures 9 A.3.5 Coding 9 Annex B (informative) S
20、pecification and Description Language (SDL) representation of procedures 9 B.1 SDL representation of ANF-RRC at the Originating PINX 10 B.2 SDL representation of ANF-RRC at the Transit PINX 10 Figure B.1 Originating PINX SDL 10 Figure B.2 Transit PINX SDL 11 Table 1 Operations in Support of ANF-RRC
21、3 Descriptors: Data processing, information interchange, telecommunications, network interconnection, telecommunication network, ISDN, private network, services, signal processing, protocols.BSISO/IEC13241:1997 iv BSI06-1999 Foreword ISO (the International Organization for Standardization) and IEC(t
22、heInternational Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with partic
23、ular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have establ
24、ished a joint technical committee, ISO/IEC JTC1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least75% of the national bodies casting a vote. International Standar
25、d ISO/IEC13241 was prepared by Joint Technical Committee ISO/IEC JTC1, Information technology, Subcommittee SC6, Telecomminications and information exchange between systems. Annex A forms an integral part of this International Standard. Annex B is for information only.BSISO/IEC13241:1997 BSI 06-1999
26、 1 Introduction This International Standard is one of a series of Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by CCITT and conforms to the framework of Standards for Open Systems Interconn
27、ection as defined by ISO. This particular International Standard specifies the signalling protocol for use at the Q reference point in support of the Route Restriction Class additional network feature. 1 Scope This International Standard specifies the signalling protocol for the support of the Route
28、 Restriction Class (RRC) additional network feature (ANF-RRC) at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a Private Integrated Services Network (PISN). ANF-RRC is a feature which applies in the establishment phase of a call, allowi
29、ng that call to access facilities that are within an allowable restriction range. The Q reference point is defined in ISO/IEC11579-1. Service specifications are produced in three stages and according to the method specified in CCITT Recommendation I.130. This International Standard contains the stag
30、e3 specification for the Q reference point and satisfies the requirements identified by the stage1 and stage2 specifications in ISO/IEC13242. The signalling protocol for ANF-RRC operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC11572, and uses
31、 certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC11582. This International Standard also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between ANF-RRC and other supplementary serv
32、ices and ANFs. This International Standard is applicable to PINXs which can interconnect to form a PISN. 2 Conformance In order to conform to this International Standard, a PINX shall satisfy the requirements identified in the Protocol Implementation Conformance Statement (PICS) proforma in Annex A.
33、 3 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on thi
34、s International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO/IEC 11571:1994, Information technology Telecommunications and inform
35、ation exchange between systems Numbering and sub-addressing in private integrated services networks. ISO/IEC 11572:1997, Information technology Telecommunications and information exchange between systems Private Integrated Services Network Circuit mode bearer services Inter-exchange signalling proce
36、dures and protocol. ISO/IEC 11574:1994, Information technology Telecommunications and information exchange between systems Private Integrated Services Network Circuit-mode64 kbit/s bearer services Service description, functional capabilities and information flows. ISO/IEC 11579-1:1994, Information t
37、echnology Telecommunications and information exchange between systems Private Integrated Services Network Part1: Reference configuration for PISN Exchanges (PINX). ISO/IEC 11582:1995, Information technology Telecommunications and information exchange between systems Private Integrated Services Netwo
38、rk Generic functional protocol for the support of supplementary services Inter-exchange signalling procedures and protocol. ISO/IEC 13242:1997, Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and i
39、nformation flows Route Restriction Class additional network feature. CCITT Rec. I.112 (1988), Vocabulary of Terms for ISDNs. CCITT Rec. I.130 (1988), Method for the characterization of telecommunication services supported by an ISDN and network capabilities of an ISDN. CCITT Rec. I.210 (1988), Princ
40、iples of telecommunication services supported by an ISDN and the means to describe them. CCITT Rec. Z. 100 (1988), Specification and Description Language. BSISO/IEC13241:1997 2 BSI 06-1999 4 Definitions For the purposes of this International Standard, the following definitions apply. 4.1 External de
41、finitions This International Standard uses the following terms defined in other documents. 5 List of acronyms 6 Signalling protocol for the support of ANF-RRC 6.1 ANF-RRC description ANF-RRC permits an RAC to be associated with a call to indicate its entitlement to use certain facilities during rout
42、eing. 6.2 ANF-RRC operational requirements 6.2.1 Requirements on the Originating PINX ISO/IEC11572 protocol control procedures for call establishment at the outgoing side of an inter-PINX link shall apply to the establishment of the call. Generic procedures for the call-related control of supplement
43、ary services, as specified in ISO/IEC11582 for an End PINX, shall apply. 6.2.2 Requirements on a Transit PINX ISO/IEC11572 protocol control procedures for call establishment at the incoming side and at the outgoing side of an inter-PINX link shall apply to the establishment of the call. Generic proc
44、edures for the call-related control of supplementary services, as specified in ISO/IEC11582 for a Transit PINX, shall apply. 6.2.3 Requirements on a Terminating PINX ISO/IEC11572 protocol control procedures for call establishment at the incoming side of an inter-PINX link shall apply to the establis
45、hment of the call. Generic procedures for the call-related control of supplementary services, as specified in ISO/IEC11582 for an End PINX, shall apply. Additional Network Feature (ISO/IEC13242) Application Protocol Data Unit (APDU) (ISO/IEC11582) Basic Service (CCITT Rec. I.210) Call, Basic Call (I
46、SO/IEC11572) End PINX (ISO/IEC11572) Facility (ISO/IEC13242) Facility Restriction Class (ISO/IEC13242) Incoming Gateway PINX (ISO/IEC11572) Interpretation APDU (ISO/IEC11582) Network Facility Extension (NFE) (ISO/IEC11582) Originating PINX (ISO/IEC11572) Outgoing Gateway PINX (ISO/IEC11572) Precedin
47、g PINX (ISO/IEC11572) Private Integrated Services Network (PISN) (ISO/IEC11579-1) Private Integrated Services Network Exchange (PINX) (ISO/IEC11579-1) Route Access Class (ISO/IEC13242) Signalling (CCITT Rec. I.112) Subsequent PINX (ISO/IEC11572) Supplementary Service (CCITT Rec. I.210) Supplementary
48、 Services Control Entity (ISO/IEC11572) Terminating PINX (ISO/IEC11572) Transit PINX (ISO/IEC11572) User (ISO/IEC11574) ANF Additional Network Feature ANF-RRC Route Restriction Class additional network feature APDU Application Protocol Data Unit ASN.1 Abstract Syntax Notation no. 1 FRC Facility Rest
49、riction Class ISDN Integrated Services Digital Network NFE Network Facility Extension PICS Protocol Implementation Conformance Statement PINX Private Integrated services Network Exchange PISN Private Integrated Services Network RAC Route Access Class RRC Route Restriction Class SDL Specification and Description LanguageBSISO/IEC13241:1997 BSI 06-1999 3 6.2.4 Requirements on the Incoming Gateway PINX ISO/IEC11572 protocol control procedures for call establishment at the outg
