STAS 9144 2-1986 Zinc powder DETERMINATION OF METALLIC ZINC CONTENT《锌粉 金属锌含量的测定 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 15300-1994 电子设备用电位器 第2部分 空白详细规范 螺杆驱动和旋转预调电位器 评定水平 E.pdf

GB T 15301-1994 气体激光器总规范.pdf

GB T 15302-1994 热释电电视摄像机总技术条件.pdf

GB T 15303-1994 热释电电视摄像机测量方法.pdf

GB T 15305.1-2005 涂附磨具 砂页.pdf

GB T 15305.2-2008 涂附磨具.砂卷.pdf

GB T 15305.3-2009 涂附磨具.砂带 宽度与长度组合的选择.pdf

GB T 15306.1-2008 陶瓷可转位刀片.第1部分 无孔刀片尺寸(G级).pdf

GB T 15306.2-2008 陶瓷可转位刀片.第2部分 带孔刀片尺寸.pdf