1、ASD STANDARD NORME ASD ASD NORM prEN 3645-004 Edition P1 November 2005 PUBLISHED BY THE AEROSPACE AND DEFENSE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Gulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: 49.060 Descriptors: ENGLISH VERSION Ae
2、rospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 C or 200 C continuous Part 004: Receptacle, hermetic, square flange mounting - Product standard Srie arospatiale Connecteurs lectriques circulaires contacts protgs, accouplement par
3、 filetage pas rapide trois filets, tempratures dutilisation 175 C ou 200 C continu Partie 004 : Embase hermtique fixation par collerette carre - Norme de produit Luft- und Raumfahrt Elektrische Rundsteckverbinder, kontaktgeschtzt, Drei-gangige Gewinde-Schnellkupplung Dauerbetriebstemperaturen 175 C
4、oder 200 C Teil 004: Hermetischer fester Steckverbinder mit quadratischem Montageflansch - Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The Aerospace and Defense Industries Association of Europe - Standardization). It is published for the ne
5、eds of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this pre-standard, the technical content shall not be changed to an extent that interchangeability is affected, physically or fu
6、nctionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). T
7、he CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 30 November 2005 Comments should be sent within six months after the date of
8、publication to ASD-STAN Electrical Domain Copyright 2005 by ASD-STAN Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 2 prEN 3645-004:2005Foreword
9、This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. Contents Page 1 Scope of app
10、lication3 2 Normative references.3 3 Terminology.4 4 Required characteristics4 4.1 Dimensions, weights .4 4.2 Materials and surface treatment5 4.3 Recommended panel cut-out .5 4.4 Electrical, mechanical and climatic characteristics .6 5 Designation 6 6 Marking.7 7 Technical specification7 Copyright
11、Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 3 prEN 3645-004:20051 Scope of application This standard specifies the characteristics of square flange herm
12、etic receptacles in the family of circular electrical connectors with triple start threaded coupling. It applies to models in table 3. The contacts are unremovable and soldered termination. For plugs and protective covers, see EN 3645-008, EN 3645-011, EN 3645-012 and EN 3645-006 respectively. These
13、 connectors are derived from and interchangeable with model Y in specification MIL-DTL-38999/21. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and
14、 the publications are listed hereafter. For dated and undated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to
15、 applies. EN 3645-001, Aerospace series - Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 001: Technical specification 1)EN 3645-002, Aerospace series - Connectors electrical, circular, scoop-proof, triple start thr
16、eaded coupling, operating temperature 175 C or 200 C continuous - Part 002: Specification of performance and contact arrangements 1)EN 3645-006, Aerospace series - Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 006
17、: Protective cover for receptacle - Product standard 1)EN 3645-008, Aerospace series - Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 008: Non release plug with grounding ring - Product standard 1)EN 3645-011, Aero
18、space series - Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 011: Lanyard release plug with grounding fingers - Type 1 - Product standard 1)EN 3645-012, Aerospace series - Connectors electrical, circular, scoop-pr
19、oof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 012: Lanyard release plug with grounding fingers - Type 2 - Product standard 1)MIL-DTL-38999/21, Connectors, electrical, circular, miniature, high density, quick disconnect (bayonet, threaded and breech coupl
20、ing), environment resistant, removable crimp and hermetic solder contacts, receptacle, box mounting flange, hermetic, triple start threaded coupling, hermetic solder contacts, series III, metric2) 1)Published as AECMA Prestandard at the date of publication of this standard2)Published by: Department
21、of Defence (DOD), The Pentagon, Washington D.C. 20301 USA Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 4 prEN 3645-004:20053 Terminology See EN
22、 3645-001. 4 Required characteristics 4.1 Dimensions, weights Dimensions and tolerances are in millimetres. Key 1 Red strip Figure 1 Square flange receptacle Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproductio
23、n or networking permitted without license from IHS-,-,-Page 5 prEN 3645-004:2005Table 1 - Square flange receptacle Dimensions K P PP R1 R2 S Shell size max. 0,20 0,20 0,30 Stainless steel mass g max. 09 11,84 5,49 18,26 15,09 23,80 21 11 15,01 20,62 18,26 26,20 27 13 19,08 23,01 20,62 28,60 35 15 22
24、,25 3,25 4,9324,61 23,01 31,00 44 17 25,43 26,97 24,61 33,30 54 19 28,60 29,35 26,97 36,50 60 21 31,78 31,75 29,36 39,70 66 23 34,95 3,91 6,15 34,93 31,75 42,90 75 25 38,13 38,10 34,93 46,00 86 4.2 Materials and surface treatment See Table 3. 4.3 Recommended panel cut-out Front or rear panel mounted
25、 Front panel mounted Optional panel cut-out Rear panel mounted, thickness: 09 to 19: 5,94 21 to 25: 5,13 Figure 2 Panel cut-out Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted with
26、out license from IHS-,-,-Page 6 prEN 3645-004:2005Table 2 - Panel cut-out - Dimensions Shell size A min. B min. C 0,13 D min. R1 R2 09 16,66 13,11 31,80 18,26 15,09 11 20,22 15,88 35,00 20,62 18,26 13 23,42 19,05 39,40 23,01 20,62 15 26,59 23,01 3,25 42,50 24,61 23,01 17 30,96 25,81 45,70 26,97 24,6
27、1 19 32,94 28,98 48,50 29,36 26,97 21 36,12 32,16 51,70 31,75 29,36 23 39,29 34,93 3,9154,90 34,93 31,75 25 42,47 37,69 58,00 38,10 34,93 Electrical, mechanical and climatic characteristics See EN 3645-002. 5 Designation EXAMPLE: Description block ELECTRICAL CONNECTOR Identity block EN3645-Y0GN35MA
28、Number of the basic standard Model according to Table 3 Shell code for hermetic, square flange fitting receptacle Shell size code according to Table 4 N: No earthed contacts Contact arrangement according to EN 3645-002 except those containing coaxial or triaxial contacts or size 10 contacts Contact
29、code M: male with solder cup X: male with eyelet Polarisation: N, A, B, C, D, E NOTE: If necessary, the code I9005 shall be placed between the classification block and the identity block. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AEC
30、MANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 7 prEN 3645-004:2005Table 3 - Model coding Model Description Y Sealed receptacles, with shell in stainless steel - Soldered contacts Maximum operating temperature 200 C continuous Table 4 - Shell size code Shel
31、l size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J 6 Marking According to EN 3645-001. 7 Technical specification According to EN 3645-001. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
