1、NSF International Standard /American Water Works Association/American National StandardNSF/ANSI 416 - 2015 Sustainability Assessment for WaterTreatment Chemical ProductsNSF/AWWA/ANSI 4162015 NSF Sustainability Standard Sustainability Assessment for Water Treatment Chemical Products NSF International
2、 Standard/ American Water Works Association/ American National Standard NSF International, an independent, not-for-profit, non-governmental organization, is dedicated to being the leading global provider of public health and safety-based risk management solutions while serving the interests of all s
3、takeholders. This Standard is subject to revision. Contact NSF to confirm this revision is current. Users of this Standard may request clarifications and interpretations, or propose revisions by contacting: Chair, Joint Committee on Water Sustainability - Chemicals c/o NSF International 789 North Di
4、xboro Road, P. O. Box 130140 Ann Arbor, Michigan 48113-0140 USA Phone: (734) 769-8010 Telex: 753215 NSF INTL FAX: (734) 769-0109 E-mail: infonsf.org Web: http:/www.nsf.org NSF/AWWA/ANSI 416-2015 i NSF International Standard/ American Water Works Association/ American National Standard for Sustainabi
5、lity Sustainability Assessment for Water Treatment Chemical Products Standard Developer NSF International Partnership collaboration with American Water Works Association NSF International Designated as an ANSI Standard January 14, 2015 American National Standards Institute ii Prepared by The NSF Joi
6、nt Committee on Water Sustainability - Chemicals Recommended for adoption by The NSF Council of Public Health Consultants Adopted by The NSF Board of Directors January 2015 Published by NSF International PO Box 130140, Ann Arbor, Michigan 48113-0140, USA For ordering copies or for making inquiries w
7、ith regard to this Standard, please reference the designation “NSF/AWWA/ANSI 416 2015.” Copyright 2015 NSF International Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm,
8、without permission in writing from NSF International. Printed in the United States of America. NSF 2015 NSF/AWWA/ANSI 416-2015 iii Disclaimers1NSF, in performing its functions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any o
9、ther party. The opinions and findings of NSF represent its professional judgment. NSF shall not be responsible to anyone for the use of or reliance upon this Standard by anyone. NSF shall not incur any obligation or liability for damages, including consequential damages, arising out of or in connect
10、ion with the use, interpretation of, or reliance upon this Standard. NSF Standards provide basic criteria to promote sanitation and protection of the public health. Provisions for mechanical and electrical safety have not been included in this Standard because governmental agencies or other national
11、 standards-setting organizations provide safety requirements. Participation in NSF Standards development activities by regulatory agency representatives (federal, local, state) shall not constitute their agencys endorsement of NSF or any of its Standards. Preference is given to the use of performanc
12、e criteria measurable by examination or testing in NSF Standards development when such performance criteria may reasonably be used in lieu of design, materials, or construction criteria. The illustrations, if provided, are intended to assist in understanding their adjacent standard requirements. How
13、ever, the illustrations may not include all requirements for a specific product or unit, nor do they show the only method of fabricating such arrangements. Such partial drawings shall not be used to justify improper or incomplete design and construction. Unless otherwise referenced, the annexes are
14、not considered an integral part of NSF Standards. The annexes are provided as general guidelines to the manufacturer, regulatory agency, user, or certifying organization. 1The information contained in this Disclaimer is not part of this American National Standard (ANS) and has not been processed in
15、accordance with ANSIs requirements for an ANS. Therefore, this Disclaimer may contain material that has not been subjected to public review or a consensus process. In addition, it does not contain requirements necessary for conformance to the Standard. This page is intentionally left blank.iv Conten
16、ts 1 General . 1 1.1 Purpose 1 1.2 Scope . 1 1.3 Principles 2 2 Normative references 2 3 Definitions . 4 4 Conformance, evaluation, and assessment criteria 6 4.1 Elements. 6 4.2 Procedures for labeling and reporting 6 4.3 Prerequisite Boundary diagram 7 4.4 Prerequisite Drinking water chemicals 7 5
17、Chemical product design . 7 5.1 Purpose 7 5.2 Prerequisite Environmental consideration in chemical product design . 8 5.3 Life cycle considerations . 8 5.4 Informed selection of major suppliers 9 6 Chemical product manufacturing process 10 6.1 Purpose 10 6.2 Environmental policy and management . 10
18、6.3 Conservation of energy resources . 10 6.4 Management of water resources . 11 6.5 Optimization of material resources 12 6.6 Protection of air resources. 13 6.7 Global sustainability of water resources . 14 7 Chemical product efficacy 14 7.1 Prerequisite Chemical content 14 7.2 Chemical efficacy 1
19、5 8 End-of-life management 15 8.1 Water treatment chemical product repurpose, reuse, or reprocess (maximum of 2 points) . 15 8.2 Collection of packaging . 15 9 Corporate governance . 15 9.1 Purpose 15 9.2 Public commitment to sustainability . 16 9.3 Employer responsibility . 16 9.4 Community engagem
20、ent . 17 9.5 Financial leadership 19 Annex A . A1 Annex B . B1 Annex C . C1 Annex D . D1 Annex E . E1 Annex F . F1 This page is intentionally left blank.v Foreword2This American National Standard, NSF/AWWA/ANSI 416 Sustainability Assessment for water treatment chemicals has been created to address s
21、ustainability of the manufacturing, distribution, repackaging, relabeling and end of life for a water treatment chemical. The Standard provides requirements sustainability for environmental, human health and social responsibility criteria. This Standard was developed as a collaborative partnership w
22、ith the American Water Works Association and NSF International. NSF Sustainability draws upon this expertise in standards development, product assurance and certification, advisory services and management systems to help companies green their products, systems and supply chains. NSF, through the Nat
23、ional Center for Sustainability Standards, has developed sustainability standards for green chemicals, building products and materials and drinking water quality. NSF works with leading regulators, scientists, engineers, public health and environmental health professionals and industry representativ
24、es to develop these transparent, consensus-based standards. Suggestions for improvement of this Standard are welcome. This Standard is maintained on a Continuous Maintenance schedule and can be opened for comment at any time. Comments should be sent to Chair, Joint Committee on Water Sustainability
25、- Chemicals, NSF International, National Center for Sustainability Standards at ncssnsf.org, or P.O. Box 130140, Ann Arbor, Michigan 48133-0140, USA. About AWWA Established in 1881, the American Water Works Association is the largest nonprofit, scientific, and educational association dedicated to ma
26、naging and treating water, the worlds most important resource. With approximately 50,000 members, AWWA provides solutions to improve public health, protect the environment, strengthen the economy and enhance our quality of life. About NSF International NSF International has been testing and certifyi
27、ng products for safety, health and the environment for more than 65 years (www.nsf.org). As an independent organization, NSFs mission is to protect public health and the environment through standards development, inspection, management systems auditing, testing and certification for industries inclu
28、ding food, water, building materials, retail, chemicals, automotive, aerospace, consumer products and health sciences. Operating in more than 120 countries, NSF is committed to protecting public health worldwide. 2The information contained in this Foreword is not part of this American National Stand
29、ard (ANS) and has not been processed in accordance with ANSIs requirements for an ANS. Therefore, this Foreword may contain material that has not been subjected to public review or a consensus process. In addition, it does not contain requirements necessary for conformance to the Standard. This page
30、 is intentionally left blank.1 2015 NSF NSF/AWWA/ANSI 416 2015 NSF/AWWA/ANSI Sustainability Standard Sustainability Standard for Water Treatment Chemical Products 1 General 1.1 Purpose The purpose of this Standard is to provide a framework for collecting data and communicating information on the sus
31、tainable attributes of a water treatment chemical product, whether repackaged, relabeled and/or distributed and can be from one or more facilities (locations). Such information is expected to encourage the demand for and supply of water treatment chemical processes that have a reduced impact on the
32、environment and society, thereby stimulating the potential for market-driven continuous improvement. This Standard is intended to be science based, provide transparency, and offer credibility for manufacturers in making environmental claims and to harmonize the principles and procedures used to supp
33、ort such claims. Sustainability-related information can contribute to a manufacturers decisions about supply chain modifications, product(s) content charges, manufacturing adjustments, performance improvements, end-of-life options, and corporate governance, with the goal of more sustainable chemical
34、 products. Within the same facility, the chemical product may be manufactured, relabeled, repackaged. Each step has the opportunity to claim credit (see section 4) toward conformance. This Standard is intended to be used primarily by water treatment chemical product manufacturers interested in under
35、standing and improving the sustainability of their chemical products and manufacturing processes as well as distributors, repackagers, and relabelers. Independent auditors, certification bodies and environmental labeling organizations are also potential users in support of market-based sustainabilit
36、y claims. This Standard may also be used by purchasers and consumers who wish to ensure that manufacturers are accurately declaring the sustainable nature of the manufacture of their chemical products. 1.2 Scope This Standard establishes a consistent approach to the evaluation and determination of e
37、nvironmentally preferable and sustainable chemical product manufacturing processes, water treatment chemical products, distributors, repackagers, and relabelers of chemical products. Many of these water treatment chemical products are used for public health protection. The document includes relevant
38、 criteria across the product(s) life cycle from raw material extraction through manufacturing, use, and end-of-life management. The intended use of this Standard is to show that the product, manufacturing processes, distribution, repackaging/relabeling, and corporate practices of a water treatment c
39、hemical product manufacturer are more sustainable. 2015 NSF/AWWA/ANSI 416 - 2015 2 1.3 Principles This standard was developed based on the following important principles. 1.3.1 Life cycle consideration The life cycle of a product(s) and its associated process(es) ranges from activities associated wi
40、th the generation of natural resources for production and delivery of raw materials to the final disposal of the product at the end of its useful life. This Standard was developed to consider the impacts of the water treatment chemical product and its manufacturing processes as well as distribution,
41、 repackaging and relabeling at the different life cycle stages to identify the appropriate and relevant characteristics and criteria to be used in evaluating a water treatment chemical product and its process sustainability profile. 1.3.2 Prerequisite Relationship with legislation A precondition for
42、 claiming conformance with this Standard shall be that the manufacturer documents the company is in compliance or taking steps toward resolution of any violations to applicable environmental local, state (or provincial), and federal regulations. This shall be confirmed by the CEO or other senior lea
43、dership in a statement confirming as such. 1.3.3 International trade aspects The procedures and requirements included within this Standard have been prepared, adopted, and applied with a view to avoiding unnecessary obstacles to international trade. 1.3.4 Scientific basis The criteria contained in t
44、his Standard were developed and selected based on social, economic, sound scientific and engineering principles intended to produce accurate, reproducible results. 2 Normative references The following documents contain provisions that, through reference, constitute provisions of this NSF/ANSI Standa
45、rd. At the time this Standard was balloted, the editions listed below were valid. All documents are subject to revision, and parties are encouraged to investigate the possibility of applying the recent editions of the documents indicated below. The most recent published edition of the document shall
46、 be used for undated references. Age Discrimination in Employment Act of 19673Civil Rights Act of 19913CML, Leiden University Institute of Environmental Sciences, Chain Management by Life Cycle Assessment (CMLCA)4Equal Pay Act of 19633Global Reporting Initiative (GRI)53 EEOC Headquarters, U.S. Equal
47、 Opportunity Commission, 131 M Street, NE, Washington, DC 20507 4 Leiden University Institute of Environmental Sciences (CML), P.O. Box 9518, 2300 RA Leiden, The Netherlands 5 Global Reporting Initiative, PO Box 10039, 1001 EA, Amsterdam, The Netherlands. 2015 NSF/AWWA/ANSI 416 - 2015 3 ILO C29 Forc
48、ed Labour Convention, 19306 ILO C105 Abolition of Forced Labour Convention, 19576ILO C182 Worst Forms of Child Labour Convention, 19996International Organization for Standardization (ISO) 9001: 2000, Quality management systems Requirements7International Organization for Standardization (ISO) 14025:
49、2006, Environmental labels and declaration type III environmental declarations principles and procedures7 International Organization for Standardization (ISO) 14044: 2006, Environmental management Life cycle assessment Requirements and guidelines7ISO 14001, 2004, Environmental management systems Requirements with guidance for use7ISO 14040, 2006, Environmental management Life cycle assessment Principles and framework7ISO 14064:1, 2006, Greenhouse gases Part 1: Specification with guidance at the organization level for quantifi
