1、i?- MIL-T-62 3 5 6 (AT ) 15 April 1983 MILITARY SPECIFICATION TRAINER, TURRET: IMPROVED TOW VEHICLE This specification is approved for use by US Army Tank-Automotive Command, Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 S
2、cope. “his specification covers turret trainer for M901 improved TOW vehicle (ITV). Trainer includes turret, armament, fire control, support items, and mounting frame. 2 APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications and standards. Unless otherwise specified, the following speci
3、fications and standards, of the issue listed in that issue of the Department o Defense Index of Specifications and Standards (DoDISS) specified in the solicitation form a part of this specification to the extent specified herein. SPECIFIC AT IONS FEDERAL TT-E-529 - Enamel, Alkyd, Semi-gloss. TT-P-6
4、64 - Primer, Coating, Synthetic, Rust-inhibiting, Lacquer-resisting. MILITARY MIL-V-5044 - Walkway Compound, Nonslip, and Walkway Matting, MIL-W-5050 - Walkway, Coating and Matting, Nonslip, Aircraft, MIL-C-8507 - Coating, Wash Primer (Pretreatment) for Metals,- Nonslip. Application of (Asg). Applic
5、ation of (for Aeronautical Use) (Asg). Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: US Army Tank-Automotive Command, ATTN: DRSTA-GSS, Warren, MI 48090, by using the self-addressed Standardiza
6、tion Document Improvement Proposal (DD Form 1426) appearing at the end of this document, or by letter. FSC 6920 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-62356 67 9777906 0404625 5 W MIL-T-23991 MIL-E-52798 MIL-E-52835 MIL-V-62347(AT) STA
7、NDARDS FEDERAL FED-STD-H28/2 MILITARY MIL-STD-105 MIL-STD-130 MIL-STD-454 MIL-STD-461 MIL-STD-462 MIL-STD-889 MIL-STD-1472 Training Devices, Military, General Enamel, Alkyd, Camouflage. Enamel, Modified Alkyd, Camouflage, Lusterless. Vehicle, Combat, Anti-tank, Improved TOW Specification for. Vehicl
8、e, (Less TOW Weapon), M901. Screw Thread Standards for Federal Services. Sampling Procedures and Tables or Inspection Identification Marking of US Military Property. Standard General Requirements for Electronic Electromagnetic Emission and Susceptibility by Attributes. Equipment. Requirements for th
9、e Control of Electromagnetic Interference. Electromagnetic Interference Characteristics, Measurement of. Dissimilar Metals. Human Engineering Design Criteria for Military Systems, Equipment and Facilities. 2.1.2 Other Government documents, drawings, and publications. The following other Government d
10、ocuments and drawings form a part of this specification to the extent specified herein. DRAWINGS ARMY 10189465 10861607 10890323 1226 5500 12265568 12265600 1226 561 1 12265621 12265635 12265714 12265723 12265800 Battery, Missile Guidance Set. Pin. System Schematic, ITV, M901. Marker. Carrier, Perso
11、nnel, Armored, Full Tracked Marker. Kit, Modification, Carrier, Personnel, Armored, Platform. Kit, Modification, Carrier, Personnel, Armored, Hook. As s embly . Full Tracked. Full Tracked. Kit, Electrical, Cupola Assembly, M901 Vehicle. Turret (Turret Kit). 2 Provided by IHSNot for ResaleNo reproduc
12、tion or networking permitted without license from IHS-,-,-12266001 12266086 12266098 12266278 12266400 12266810 122774 20 12277600 12277611 12277801 12277803 12277804 12277809 12277862 12278785 Erector-launcher Arm Assembly (Armament Kit) Electrical Installation, ITV. Erection Arm. Launcher. Sight/O
13、ptics Fire Control Installation (Fire Guard. Support Assembly. M113 Modification Kit. Simulator Assembly - Boresight and Remote Arming Device. Trainer Assembly. Main Frame Weldment Trainer (ITV). Ladder Assembly. Cargo Door. Installation, Electrical TOW Systems Trainer. Decal. (Installation). Contro
14、l Kit). (Copies of specifications, standards, drawings, and publications required by manufacturers in connection with specific acquisition functions should be obtained from the acquisitioning activity or as directed by the contracting officer. ) 2.2 Order of precedence. In the event of a conflict be
15、tween the text of this specification and the references cited herein, the text of this specification shall take precedence. 3. REQUIREMENTS 3.1 First article (initial production). Trainers to be furnished under this specification shall be represented by samples taken from initial product- ion after
16、award of contract. Samples shall be produced using tools and equip- ment that shall be used for manufacturing in quantity. Samples shall withstand initial production inspection specified herein (see 6.3). 3.2 Materials. Materials shall be as specified herein and in referenced specifications, standar
17、ds and drawings. Material shall be free from defects which adversely affect performance or serviceability of the finished product (see 6.5). 3.3 Design and construction. Unless otherwise specified herein, trainer design and construction shall conform to Drawing 12277801, to drawings listed in table
18、I, and to such other drawings, specifications, and standards as may be applicable. fit, form, and function. Electronic parts and assemblies shall be inter- changeable in accordance with requirement 7, MIL-STD-454. Parts with same part number shall be interchangeable as to 3 Provided by IHSNot for Re
19、saleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-bZ35b 67 W 777770b 0404627 7 TABLE I. Turret trainer and subassemblies. - Drawing no. Subassembly 10189465 Battery, Missile Guidance Set. 10861607 10890323 12265500 12265568 12265611 12265621 1226563 5 1226571 4 12265723
20、12265800 12266001 12266086 12266098 12266278 12266400 12266810 12277420 12277600 1227 761 1 12277801 12277803 12277804 12277809 1227 7862 Hook. Pin. System Schematic, ITV, M901. Marker. Marker. Kit, Modification, Carrier, Personnel, Armored Platform. Kit, Modification, Carrier, Personnel, Electrical
21、 Kit, M901 Vehicle. Cupola Assembly, Turret (Turret Kit). Erector-launcher Arm Assembly (Armament Kit) Electrical, Installation, ITV. Erection Arm. Launcher. Sight/Optics Fire Control Installation Guard. Support Assembly. M113 Modification Kit. Simulator Assembly - Boresight and Remote Arming Device
22、. Trainer Assembly. Main Frame Weldment Trainer (ITV). Ladder Assembly. Cargo Door. Installation, Electrical TOW Systems Trainer. Full Tracked. Armored Full Tracked. (installation). (Fire Control Kit). 12298785 Decal. 3.3.1 Government furnished equipment. Government furnished equipment (GFE) will be
23、 as specified in applicable contract or purchase order (see 6.2). 3.3.2 Trainer. Unless otherwise specified herein, trainer and sub- assemblies shall meet the requirements of MIL-T-23991. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.3.3 Main f
24、rame weldment. Main frame weldment shall conform to Drawing 12277803 and shall provide mounting for turret cupola assembly Drawing 12265800; erector-launcher arm assembly Drawing 12266001; sight and optics fire control installation Drawing 12266400; armored full track personnel carrier modification
25、kit Drawing 12265621; and trainer support items specified herein. 3.3.3.1 Walls. Main frame weldrnent shall be equipped with removable wooden walls at front, and on right and left sides. 3.3.3.2 Level sensors. Main frame weldment shall be equipped with level sensors (inclinometers) to indicate longi
26、tudinal and lateral cant angles between O and 10 degrees (O) in each direction on each axis. 3.3.3.3 Electrical junction box. Main frame weldment shall be equipped with electrical junction box including cables, connectors, swtches, and equipment arranged in circuits conforming to Drawing 12277862, a
27、nd requirement 1, MIL-STD-454. Weldment shall be direct current (dc) ground. Operating power shall be converted from 208/220/440 volts root-mean-square (Vrms) , three phase, 60 Hertz (Hz), 30 KVA maximum, alternating current (ac) power source. 3.3.3.4 Power cable. Main frame weldment shall be equipp
28、ed with electrical power cable not less than 20 feet in length, designed in accordance with MIL-STD-454. 3.3.4 Turret cupola assembly. Trainer shall be equipped with turret cupo- la assembly conforming to Drawing 12265800. weldment in manner specified on Drawing 12265600. Turret shall mount to main
29、frame 3.3.5 Guided missile launcher. Turret shall be equipped with erection arm conforming to Drawing 12266098 and launcher conforming to drawing 12266278. Installation shall conform to Drawing 12266001. 3.3.6 Guided missile mount kit. Trainer shall be equipped with the following removable items con
30、forming to Drawing 12265600: Missile storage racks Launch tube mounting assembly Traversing unit mounting assembly Tripod mounting assembly 3.3.7 Squad leaders periscope. Trainer shall be equipped with squad leaders periscope specified on Drawing 12265600. 5 Provided by IHSNot for ResaleNo reproduct
31、ion or networking permitted without license from IHS-,-,-3.3.8 M26 periscope. Trainer shall be equipped with M26 periscope specified on Drawing 12265600. 3.3.9 M60 machine gun. Trainer shall be equipped with M60 machine gun (see table I) mounted on cupola with pintle pin mount and traversing rail. M
32、achine gun mount shall lock at any point along traversing rail. position, machine gun shall not interfere with operation of other subassem- blies of trainer. When in stow 3.3-10 Smoke grenade launcher arm/fire box. Trainer shall be equipped with GFE smoke grenade launcher arm/fire box. 3.3.11 Cargo
33、door. Trainer shall be equipped with simulated cargo door, including door support, closing latch, two position bolt plate, and door bolt conforming to Drawing 12265600. Door may be constructed of lightweight materials suitable for training purposes. to hold it open in either one of two positions, LO
34、AD or FnL. Door shall be equipped with means 3.3.12 Communications. Trainer shall be equipped with communications equipment as specified on Drawing 12277862. for on-board communications. Five stations shall be provided 3.3.13 Welding. Welding procedures shall conform to applicable drawing, specifica
35、tion, or standard. Misalignment and dimensional variations shall be within limits specified on applicable drawing (see 6.2). 3.3.14 Standard parts. Military standard parts shall be incorporated whenever possible. Commercial standard parts may be used provided they are interchangeable with military s
36、tandard parts without modification. 3.3.15 Threaded parts. Screw threads of the form, number per inch, and Class specified on the applicable drawing or military standard shall be in accordance with FED-STD-H28/2. - 3.3.15.1 Locking devices. Lock washers, self-locking nuts, safety wires, or other app
37、roved locking devices shall be incorporated where specified or where required to prevent loosening of components. 3.3.16 Dissimilar metals. Dissimilar metals shall be protected from galvanic corrosion in accordance with requirements of MIL-ST-889. 3.4 Performance. 3.4.1 Strength and rigidity. Fully
38、assembled trainer with a training class onboard weighing 1100 pounds (lbs) shall conform to requirements specified herein while canted to any longitudinal or lateral angle not more than 10“ from normal. distortion of main frame weldment nor impair operation of subassemblies. Canting trainer to 10 an
39、gle shall not cause permanent 6 w Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.4.2 Lift eye hoist. Lift eyes, when used together for hoisting, shall support weight of assembled trainer. Trainer shall withstand such hoisting with no impairment of
40、 operation nor permanent distortion. 3.4.3 Fork lift transport. Lift fork bearings, when used together for lifting, shall support weight of assembled trainer. Trainer shall withstand such lifting with no impairment of operation nor permanent distortion. 3.4.4 Towing attachments. Towing attachments s
41、hall withstand pull required to move assembled trainer on casters over smooth, hard surface. Trainer shall withstand such towing with no impairment of operation nor perm- anent di s to r t ion. 3.4.5 Casters. Casters shall support assembled trainer and shall roll and turn as required when trainer is
42、 pushed or towed over smooth, hard surface. Trainer shall withstand moving or standing on casters with no impairment of operation nor permanent distortion. 3.4.6 Stow supports and brackets. Stow supports and brackets shall re- ceive launcher and support its weight in stowed position. 3.4.7 Seats. Se
43、ats shall rigidly support crew members. 3.4.8 Screw jacks and jack stands. Screw jacks and jack stands shall support assembled trainer, with crew, at any longitudinal or lateral angle not more than 10“ from normal. Trainer shall withstand such displacement with no impairment of operation nor permane
44、nt distortion. 3.4.9 Access ladder. Access ladder shall rigidly support personnel during ascent and descent and shall be easily removed and securely stowed. 3.4.10 Stanchions and safety chains. Removable stanchions and safety chains shall be installed around the perimeter of the trainer upper-deck w
45、ith chains 42 inches and 21 inches above deck surface. Each section of chain shall support a leaning weight of 200 pounds. 3.4.11 Electrical operation. Trainer subassemblies shall operate with 28 volt (V) direct current (dc) (+4 -6 Vdc), 200 ampere (A) circuit. 3.4.12 Current surge. 28 Vdc, 200A cir
46、cuits shall withstand current surge of 700A or one second with no impairment of operation. 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.4.13 Steady state voltage. - Steady state output ripple voltage shall be not more than 4V peak-to-peak over
47、 frequency range of 50 Hertz (Hz) to 200 kHz . 3.4.14 Electromagnetic interference characteristics. Electromagnetic interference characteristics of trainer shall conform to classes A-3 and C-1 of MIL-STD-461. 3.4.15 Safety interrupts and override controls. Safety interrupts and override controls sha
48、ll govern operation of turret and missile launcher as specified in table II. 3.4.15.1 Launcher fire/no-fire zones. Safety interrupts shall govern missile launching as specified in tables II and III. 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-m
49、 e O rl U rl a G O U aJ a rl & b E a 8 Q1 U a 1 h k al U c rl R U al u.c a rn www as HO0 CrrNS c) zo !/ u /a 4 o U l4 u k r( U a & w rl rl o * P .ro U rl a O rl rl m s u m rl X Q) m G O rl u rl a o g aJ k 2 k O U z h 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ACIOH ZI?NH DRIVE 10 Provided by IHSNot for ResaleNo reproduction or networkin
