1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHousehold and similar electrical appliances SafetyPart 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial useBS EN 60335-2-69:201
2、2Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 60335-2-69:2012. It isidentical to IEC
3、 60335-2-69:2012. It supersedes BS EN 60335-2-69:2009which is withdrawn.The UK national committee voted against the final draft of this standard as itsees no reason to prohibit the use of flow-through collector motors, as statedin Subclause CC.4.201. It is the opinion of the national committee that
4、flow-through collector motors can be used in Cat 3 D (Zone 22) applications ifthey satisfy provisions given in IEC 61241 parts 0 and 1.The UK participation in its preparation was entrusted by Technical CommitteeCPL/61, Safety of household and similar electrical appliances, toSubcommittee CPL/61/10,
5、Floor treatment machines (industrial).A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Inst
6、itution 2013. Published by BSI Standards Limited 2013 ISBN 978 0 580 70466 6 ICS 97.080 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendmen
7、ts issued since publicationDate Text affectedBRITISH STANDARDBS EN 60335-2-69:2012This British Standard is the UK implementation of EN 60335-2-69:2012. It is derived from IEC 60335-2-69:2012. It supersedes BS EN 60335-2-69:2009 which is withdrawn.The CENELEC common modifications have been implemente
8、d at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags . The UK national committee voted against the final draft of this standard as it sees no reason to prohibit the use of flow-through collector motors, as stated in Subclause CC.4
9、.201. It is the opinion of the national committee that flow-through collector motors can be used in Cat 3 D (Zone 22) applications if they satisfy provisions given in IEC 61241 parts 0 and 1.The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and
10、similar electrical appliances, to Subcommittee CPL/61/10, Floor treatment machines (industrial). A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are res
11、ponsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 70466 6ICS 97.080Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standar
12、ds Policy and Strategy Committee on 31 May 2013.Amendments/corrigenda issued since publicationDate Text affectedCopyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,
13、-,-EUROPEAN STANDARD EN 60335-2-69 NORME EUROPENNE EUROPISCHE NORM August 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012
14、CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-69:2012 E ICS 97.080 Supersedes EN 60335-2-69:2009English version Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry va
15、cuum cleaners, including power brush for commercial use (IEC 60335-2-69:2012, modified) Appareils lectrodomestiques et analogues - Scurit - Partie 2-69: Rgles particulires pour les aspirateurs fonctionnant en prsence deau ou sec usage commercial (CEI 60335-2-69:2012, modifie) Sicherheit elektrischer
16、 Gerte fr den Hausgebrauch und hnliche Zwecke - Teil 2-69:Besondere Anforderungen fr Staub- und Wassersauger fr den gewerblichen Gebrauch (IEC 60335-2-69:2012, modifiziert) This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply with the CEN/CENELEC Internal
17、 Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
18、ELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the officia
19、l versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal
20、ta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 60335-2-69:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or net
21、working permitted without license from IHS-,-,-EN 60335-2-69:2012 - 2 - Foreword The text of document 61J/481/FDIS, future edition 4 of IEC 60335-2-69, prepared by IEC/SC 61J “Electrical motor-operated cleaning appliances for commercial use“, of IEC/TC 61, “Safety of household and similar electrical
22、 appliances“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60335-2-69:2012. A draft amendment, which covers common modifications to IEC 60335-2-69, was prepared by CLC/TC 61,“Safety of household and similar electrical appliances“ and approved by CENELEC. The following
23、dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-03-28 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2015-03-28 This docume
24、nt supersedes EN 60335-2-69:2009. EN 60335-2-69:2012 includes the following significant technical changes with respect to EN 60335-2-69:2009: the scope has been revised editorially to avoid misunderstandings; terms and definitions has been revised with regard to the requirements revised; the standar
25、d has been revised in general and updated regarding state-of-the-art, as far as necessary, in particular some changes have been made to Clauses 15, 22 and 25; Annex AA was revised and restructured; Annex CC was made informative; a new Annex EE Emission of acoustical noise was added; and a new Annex
26、FF Emission of vibration was added. This part 2 is to be used in conjunction with EN 60335-1:2012. NOTE 1 When “Part 1” is mentioned in this standard, it refers to EN 60335-1. This part 2 supplements or modifies the corresponding clauses in EN 60335-1, so as to convert that publication into the Euro
27、pean Standard: Safety requirements for wet and dry vacuum cleaners, including power brush, for commercial use. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,
28、 the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting f
29、rom 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. BS EN 60335-2-69:2012 2 BS EN 60335-2-69:2012EN 60335-2-69:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reprodu
30、ction or networking permitted without license from IHS-,-,- 3 - EN 60335-2-69:2012 NOTE 3 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an
31、 adjective, the adjective and the associated noun are also in bold. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 60335-2-69:2012 are prefixed “Z”. Attention is drawn to the possibility that some of the elements of this document may be the subject of pa
32、tent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). Fo
33、r the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 60335-2-69:2012 was approved by CENELEC as a European Standard with agreed common modifications. COMMON MODIFICATIONS 1 Scope Ad
34、d the following paragraph before the last paragraph: “This European Standard deals with the reasonably foreseeable hazards presented by machines that are encountered by all persons. However, in general, it does not take into account: children playing with the machine; the use of the machine by child
35、ren; the use of the machine by vulnerable people or very vulnerable people.“. 3 Terms and definitions 3.6.3 accessible part Modification: Delete “and probe 18”. 7 Marking and instructions 7.10 Delete the following paragraphs: “Devices used to start/stop operational functions of the appliance, if any
36、, shall be distinguished from other manual devices by means of shape, or size, or surface texture, or position, etc. An indication that the device has been operated shall be given by: A tactile feedback or An audible and visual feedback. BS EN 60335-2-69:2012 3 BS EN 60335-2-69:2012EN 60335-2-69:201
37、2Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 60335-2-69:2012 - 6 - Add the following special national condition to Annex ZA of EN 60335-1:2012: Annex
38、ZA (normative) Special national conditions Special national condition: National characteristic or practice that cannot be changed even over a long period, e.g. climatic conditions, electrical earthing conditions. NOTE If it affects harmonization, it forms part of the European Standard / Harmonizatio
39、n Document. For the countries in which the relevant special national conditions apply these provisions are normative, for other countries they are informative. Clause 7.12 Special national condition Finland If a polyvinyl chloride sheathed cord is fitted, the instructions shall state that the applia
40、nce is not to be used outdoors at low temperature. BS EN 60335-2-69:2012 4 BS EN 60335-2-69:2012EN 60335-2-69:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS
41、-,-,- 7 - EN 60335-2-69:2012 Add the following references to Annex ZC of EN 60335-1:2012: Annex ZC(normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document an
42、d are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod
43、), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60312-1 - Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance FprEN 60312-11)- ISO 2602 - Statistical interpretation of test results - Estimation of the mean - Confidence interval
44、- - ISO 6344-2 - Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P12 to P220 - - ISO 7731 - Ergonomics - Danger signals for public and work areas - Auditory danger signals EN ISO 7731 - ISO 11428 - Ergonomics - Visual danger signals - General r
45、equirements, design and testing - - 1)At draft stage. BS EN 60335-2-69:2012 5 BS EN 60335-2-69:2012EN 60335-2-69:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from
46、IHS-,-,-EN 60335-2-69:2012 - 8 - Annex ZE (informative) Specific additional requirements for appliances and machines intended for commercial use This annex is not applicable. BS EN 60335-2-69:2012 6 BS EN 60335-2-69:2012EN 60335-2-69:2012Copyright European Committee for Electrotechnical Standardizat
47、ion Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 9 - EN 60335-2-69:2012 Replace Annex ZZ of EN 60335-1:2012 by Annex ZZ (informative) Coverage of Essential Requirements of EU Directive 2006/42/EC This European Standard
48、has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant essential requirements as given in Annex I of the EU Directive 2006/42/EC. This includes the risk of explosion in accordance with 1.5.7 of Annex I of this Directive. As far as the risk of explosion due to the use in a potentially explosive atmosphere is concerned, compliance with this standard will not in all cases be sufficient to fulfil all applicable Essential Requirements of the Equipmen
