CNS 9213-1982 Test Code of Performance of Universal Tool Grinder《万能工具磨床动态检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 15825.1-2008 金属薄板成形性能与试验方法.第1部分 成形性能和指标.pdf

GB T 15825.2-2008 金属薄板成形性能与试验方法.第2部分 通用试验规程.pdf

GB T 15825.3-2008 金属薄板成形性能与试验方法.第3部分 拉深与拉深载荷试验.pdf

GB T 15825.4-2008 金属薄板成形性能与试验方法.第4部分 扩孔试验.pdf

GB T 15825.5-2008 金属薄板成形性能与试验方法.第5部分 弯曲试验.pdf

GB T 15825.6-2008 金属薄板成形性能与试验方法.第6部分 锥杯试验.pdf

GB T 15825.7-2008 金属薄板成形性能与试验方法.第7部分 凸耳试验.pdf

GB T 15825.8-2008 金属薄板成形性能与试验方法.第8部分 成形极限图(FLD)测定指南.pdf

GB T 15827-1995 离子镀 仿金氮化钛的颜色.pdf