1、INCH-POUND MIL-DTL-5423/10E 17 February 2009 SUPERSEDING MIL-DTL-5423/10D 4 February 2008 DETAIL SPECIFICATION SHEET BOOTS, DUST AND WATER SEAL, TYPE B (FOR PUSH-BUTTON SWITCHES), STYLE 4 (ONE-HOLE MOUNTING, MINIATURE, DRILLED PANEL) This specification sheet is approved for use by all Departments an
2、d Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-5423. Inches mm. Inches mm. Inches mm. Inches mm. .005 .010 .015 .016 0.13 0.25 0.38 0.41 .020 .022 .031 .062 0.51 0.56 0.79 1.57 .072 .094 .141
3、156 1.83 2.39 3.58 3.96 .188 .203 .312 .375 4.78 5.16 7.92 9.53 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerances are .015. FIGURE 1. Dimensions and configuration boots type B, style 4. AMSC N/A FSC 5930 Provi
4、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-5423/10E 2 REQUIREMENTS Dimensions and configuration: See figure 1. Silicon rubber: Grade 60. Part or Identifying Number (PIN): See table I. Table I. PINs. Dimensions PIN M5423/10- A B Size 01 02 03
5、203 .203 .141 1/4 -32 UNS-2B 1/4 -40 UNS-2B 1/4- 40 UNS-2B 1 2 3 Qualification: First Article Testing in accordance with MIL-DTL-5423. The margins of this specification are marked with vertical lines to indicate where modifications were made. This was done as a convenience only and the Government a
6、ssumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Reference Documents MIL-DTL-5423 Custodians: Preparing activity: Army - CR D
7、LA - CC Navy - AS Air Force - 85 (Project 5930-2008-066) DLA - CC Review activities: Army - AR, AT, AV, CR4, MI Navy - CG, EC, MC, OS Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
