1、 MS9313B 16 February 2010 SUPERSEDING MS9313A (ASG) 12 August 1964 DETAIL SPECIFICATION SHEET CAP, TUBE - SAE-AMS5646 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this
2、 specification sheet. FIGURE 1. Cap, tube. AMSC N/A FSC 4730INCH-POUND Inches mm .005 .010 .060 .090 .125 .160 0.13 0.25 1.52 2.29 3.18 4.06 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS9313B 2 Dash number Tube OD inches (mm) A Diameter inches (
3、mm) +.000 -.005 (0.13) B Diameter inches (mm) +.000 -.003 (0.08) C inches (mm) D inches (mm) -02 .125 (3.18) .172 (4.37) .267 (6.78) .230 (5.84) .235 (5.97) -03 .188 (4.78) .234 (5.94) .329 (8.36) .230 (5.84) .235 (5.97) -04 .250 (6.35) .297 (7.54) .383 (9.73) .230 (5.84) .235 (5.97) -05 .313 (7.95)
4、 .366 (9.30) .445 (11.30) .230 (5.84) .235 (5.97) -06 .375 (9.53) .432 (10.97) .502 (12.75) .230 (5.84) .228 (5.79) -07 .438 (11.13) .494 (12.55) .564 (14.33) .230 (5.84) .255 (6.48) -08 .500 (12.70) .562 (14.27) .682 (17.32) .230 (5.84) .285 (7.24) -09 .562 (14.27) .626 (15.90) .743 (18.87) .230 (5
5、.84) .295 (7.49) -10 .625 (15.88) .690 (17.53) .797 (20.24) .230 (5.84) .302 (7.67) -11 .688 (17.48) .762 (19.35) .908 (23.06) .230 (5.84) .305 (7.75) -12 .750 (19.05) .826 (20.98) .972 (24.69) .230 (5.84) .306 (7.77) -14 .875 (22.23) .953 (24.21) 1.097 (27.86) .230 (5.84) .325 (8.26) -16 1.000 (25.
6、40) 1.081 (27.46) 1.222 (31.04) .230 (5.84) .342 (8.69) -18 1.125 (28.58) 1.209 (30.71) 1.409 (35.79) .260 (6.60) .370 (9.40) -20 1.250 (31.75) 1.339 (34.01) 1.534 (38.96) .300 (7.62) .397 (10.08) -24 1.500 (38.10) 1.609 (40.87) 1.784 (45.31) .300 (7.62) .405 (10.29) -28 1.750 (44.45) 1.882 (47.80)
7、2.159 (54.84) .400 (10.16) .405 (10.29) -32 2.000 (50.80) 2.159 (54.84) 2.409 (61.19) .400 (10.16) .405 (10.29) -40 2.500 (63.50) 2.659 (67.54) 2.911 (73.94) .400 (10.16) .405 (10.29) -48 3.000 (76.20) 3.172 (80.57) 3.411 (86.64) .400 (10.16) .405 (10.29) FIGURE 1. Cap, tube - Continued. Provided by
8、 IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS9313B 3 Dash number E Diameter inches (mm) F Diameter inches (mm) G inches (mm) Approximate weight lb/100 (kg/100) -02 .090 (2.29) .124 (3.15) .041 (1.04) .37 (0.17) -03 .150 (3.81) .185 (4.70) .040 (1.02) .63 (
9、0.29) -04 .200 (5.08) .242 (6.15) .036 (.91) 1.00 (0.45) -05 .260 (6.60) .302 (7.67) .035 (.89) 1.44 (0.65) -06 .320 (8.13) .358 (9.09) .031 (.79) 1.67 (0.76) -07 .385 (9.78) .430 (10.92) .036 (.91) 2.18 (0.99) -08 .438 (11.13) .504 (12.80) .044 (1.12) 3.27 (1.48) -09 .500 (12.70) .555 (14.10) .036
10、(.91) 3.82 (1.73) -10 .562 (14.27) .621 (15.77) .039 (.99) 4.36 (1.98) -11 .625 (15.88) .698 (17.73) .048 (1.22) 5.67 (2.57) -12 .686 (17.42) .769 (19.53) .054 (1.37) 6.39 (2.90) -14 .812 (20.62) .894 (22.71) .054 (1.37) 8.09 (3.67) -16 .938 (23.83) 1.021 (25.93) .055 (1.40) 9.92 (4.50) -18 1.062 (2
11、6.97) 1.174 (29.82) .074 (1.88) 13.91 (6.31) -20 1.188 (30.18) 1.299 (32.99) .074 (1.88) 17.00 (7.71) -24 1.438 (36.53) 1.532 (38.91) .062 (1.57) 23.61 (10.71) -28 1.688 (42.88) 1.839 (46.71) .100 (2.54) 34.90 (15.83) -32 1.938 (49.23) 2.099 (53.31) .107 (2.72) 42.65 (19.35) -40 2.438 (61.93) 2.594
12、(65.89) .117 (2.97) 57.75 (26.19) -48 2.938 (74.63) 3.099 (78.71) .107 (2.72) 75.45 (34.22) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Caps shall be free of all burrs and slivers. 4. Unless otherwise specified tolerance is .010 inch (0.25 mm) angular
13、 dimensions 5. 5. This surface shall be free of nicks, chatter marks, or low spots. Unbroken line of contact to show all around at other than extremities of this surface when rotated in content with 74 0 0 1 included angle gage lightly coated by rubbing with carbon paper. 6. For design features purp
14、oses, this standard takes precedence over documents referenced herein. FIGURE 1. Cap, tube - Continued. REQUIREMENTS: Dimensions and configurations: See figure 1. Material: Steel, corrosion and heat-resistant in accordance with SAE-AMS5646. Parts shall be fluorescent penetrate inspected in accordanc
15、e with ASTM E1417. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS9313B 4 Part or Identifying Number (PIN): MS9313 -08 PIN Example: MS9313-08 identifies a cap, tube .500 inch (12.70 mm) tube, CRES. Do not use unassigned PINs. Changes from previous
16、 issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. This document references the following: ASTM E1417 SAE-AMS5646 CONCLUDING MATERIAL Custodians: Preparing activity: Navy - AS DLA - C
17、C Air Force - 99 DLA - CC (Project 4730-2009-085) Review activity: Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Specification sheet number Nut tube coupling size (see figure 1) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
