FORD FLTM AU 101-01-2000 SILANE ADHESION PROMOTER - SOLIDS AND ASH CONTENT《固体物和灰分用硅烷增粘剂[替代 FORD FLTM BU 118-01]》.pdf

上传人:registerpick115 文档编号:746843 上传时间:2019-01-14 格式:PDF 页数:2 大小:22.65KB
下载 相关 举报
FORD FLTM AU 101-01-2000 SILANE ADHESION PROMOTER - SOLIDS AND ASH CONTENT《固体物和灰分用硅烷增粘剂[替代 FORD FLTM BU 118-01]》.pdf_第1页
第1页 / 共2页
FORD FLTM AU 101-01-2000 SILANE ADHESION PROMOTER - SOLIDS AND ASH CONTENT《固体物和灰分用硅烷增粘剂[替代 FORD FLTM BU 118-01]》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 FORD LABORATORY TEST METHOD AU 101-01 Date Action Revisions 2000 08 22 Revised Editorial no te chnical change A. Cockman 2000 05 18 Editorial no technical change A. Cockman 1992 01 14 Printed copies are uncontrolled Page 1 of 2 Copyright 2 000, Ford Global Technologies, Inc. SILANE ADHESION PROMOTE

2、R - SOLIDS AND ASH CONTENT Application This method is used to determine the solids and ash content of silane adhesion promotor. Apparatus and Materials Required Porcelain Crucible With cover: 40 mm diameter and 35 mm high. Desiccator Charged with suitable desiccant. Analytical Balance Accuracy of +/

3、 - 0.1 mg. Mechanical Convection Oven Capable of maintaining a temperature of 105 +/ - 2 C. Muffle Furnace Capable of maintaining a temperature of 950 +/ - 10 C. Acetic Acid Solution 6 g of approximately 100 % acetic acid diluted to 100 mL with deionized water. Conditioning and Test Conditions All t

4、est values indicated herein are based on material conditioned in a controlled atmosphere of 23 +/ - 2 C and 50 +/ - 5 % relative hum idity for not less than 24 h prior to testing and tested under the same conditions unless otherwise specified. Procedure Determination of Solid Content: 1. Heat 3 cruc

5、ibles and covers in the muffle furnace for 30 minutes at 950 +/ - 10 C. 2. Cool the cr ucibles and covers in the desiccator, then weigh to the nearest 0.1 mg (Wa). 3. Place approximately 3 g of the sample into each crucible and weigh (include covers) to the nearest 0.1 mg (Wb). FORD LABORATORY TEST

6、METHOD AU 101-01 Page 2 of 2 Copyright 2000, Ford Global Technologies, Inc. 4. Add 1 mL of acetic acid solution to each crucible and keep for 2 - 3 h at 23 +/ - 2 C. 5. Place the crucibles (without covers) into the mechanical convection oven and maintain at 105 +/ - 2 C for 3 h. 6. Cool in a desicca

7、tor and weigh each crucible (and cover) containing the sample (Wc). Save for Ash Content d etermination procedure. Evaluation: Calculate the % solid as follows and report the results as the average value of the 3 samples. % solids = Wc - Wa x 100 Wb - Wa Where: Wa = initial weight of crucibles and c

8、overs Wb = initial weight of crucible s and sample Wc = final weight of crucibles and sample Note: If the individual results of the 3 samples differ from each other by more than 1 %, repeat the procedure. Determination of Ash Content: 1. Place the covered crucibles containing the weighed r esidue fr

9、om step 6, Determination of Solid Content, into the cool muffle furnace, set at 950 +/ - 10 C and start the furnace. 2. Remove the covers after the temperature reaches 950 C and burn to constant weight (at least 3 h). (Covers should remain in t he furnace.) 3. Cover the crucibles with the original c

10、overs, remove from the furnace, and cool in a desiccator. 4. Weigh to the nearest 0.1 mg (Wd). Evaluation: Calculate the % ash as follows and report the results as the average value of the 3 sample s. % Ash = Wd - Wa x 100 Wb - Wa Where: Wa = initial weight of crucibles and covers Wb = initial weigh

11、t of crucibles and sample Wd = final weight of crucibles and covers and sample Note: If the individual results of the 3 samples differ from each oth er by more than 1 %, repeat the procedure. Chemicals, materials, parts, and equipment referenced in this document must be used and handled properly. Each party is responsible for determining proper use and handling in its facilities.

展开阅读全文
相关资源
猜你喜欢
  • ASD-STAN PREN 3101-1997 Aerospace Series Non-Metallic Materials Sealants Test Method Determination of Resistance to Thermal Rupture (Edition P 1)《航空航天系列 密封胶试验方法 耐热断裂性的测定 第P1版》.pdf ASD-STAN PREN 3101-1997 Aerospace Series Non-Metallic Materials Sealants Test Method Determination of Resistance to Thermal Rupture (Edition P 1)《航空航天系列 密封胶试验方法 耐热断裂性的测定 第P1版》.pdf
  • ASD-STAN PREN 3102-2000 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility (Edition P 1)《航空航天系列 密封胶试验方法 低温柔性的测定 第P1版》.pdf ASD-STAN PREN 3102-2000 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility (Edition P 1)《航空航天系列 密封胶试验方法 低温柔性的测定 第P1版》.pdf
  • ASD-STAN PREN 3112-1994 Aerospace Series Bolts Normal Hexagonal Head Threaded to Head in Alloy Steel Cadmium Plated Classification 900 MPa (at Ambient Temperature) 235 Degrees C (E.pdf ASD-STAN PREN 3112-1994 Aerospace Series Bolts Normal Hexagonal Head Threaded to Head in Alloy Steel Cadmium Plated Classification 900 MPa (at Ambient Temperature) 235 Degrees C (E.pdf
  • ASD-STAN PREN 3113-1999 Aerospace Series Screws Hexagonal Normal Head Fully Threaded in Titanium Alloy Anodized Classification 900 MPa 315 Degrees C (Edition P 2 Withdrawn - Not Re.pdf ASD-STAN PREN 3113-1999 Aerospace Series Screws Hexagonal Normal Head Fully Threaded in Titanium Alloy Anodized Classification 900 MPa 315 Degrees C (Edition P 2 Withdrawn - Not Re.pdf
  • ASD-STAN PREN 3114-1-1997 Aerospace Series Test Method Microstructure of (a + b) Titanium Alloy Wrought Products Part 1 General Requirements (Edition P 1)《航空航天系列 (a+b)钛合金锻件的显微结构的试验.pdf ASD-STAN PREN 3114-1-1997 Aerospace Series Test Method Microstructure of (a + b) Titanium Alloy Wrought Products Part 1 General Requirements (Edition P 1)《航空航天系列 (a+b)钛合金锻件的显微结构的试验.pdf
  • ASD-STAN PREN 3114-2-1997 Aerospace Series Test Method Microstructure (a + b) Titanium Alloy Wrought Products Part 2 Microstructure of Bars Sections Forging Stock and Forgings (Edi.pdf ASD-STAN PREN 3114-2-1997 Aerospace Series Test Method Microstructure (a + b) Titanium Alloy Wrought Products Part 2 Microstructure of Bars Sections Forging Stock and Forgings (Edi.pdf
  • ASD-STAN PREN 3114-3-1997 Aerospace Series Test Method Microstructure of (a + b) Titanium Alloy Wrought Products Part 3 Microstructure of Plate (Edition P 1)《航空航天系列 (a+b)钛合金锻件的显微结构.pdf ASD-STAN PREN 3114-3-1997 Aerospace Series Test Method Microstructure of (a + b) Titanium Alloy Wrought Products Part 3 Microstructure of Plate (Edition P 1)《航空航天系列 (a+b)钛合金锻件的显微结构.pdf
  • ASD-STAN PREN 3114-4-1997 Aerospace Series Test Method Microstructure of (a + b) Titanium Alloy Wrought Products Part 4 Microstructure of Sheet for Superplastic Forming (Edition P .pdf ASD-STAN PREN 3114-4-1997 Aerospace Series Test Method Microstructure of (a + b) Titanium Alloy Wrought Products Part 4 Microstructure of Sheet for Superplastic Forming (Edition P .pdf
  • ASD-STAN PREN 3115-2007 Aerospace series Aluminium alloy 7050- T73 Wire for solid rivets D Less than or Equal to 10 mm (Edition P 2)《航空航天系列 实心铆钉用D≤10mm的铝合金7050-T73线材 第P2版》.pdf ASD-STAN PREN 3115-2007 Aerospace series Aluminium alloy 7050- T73 Wire for solid rivets D Less than or Equal to 10 mm (Edition P 2)《航空航天系列 实心铆钉用D≤10mm的铝合金7050-T73线材 第P2版》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1