1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 06 03 N-STATUS No Replacement Named A. Wedepohl, NA 2003 01 27 Revised Para 3.0 inserted 1981 11 09 Released SM/EQ 8875 TP Printed copies are uncontrolled Page 1 of 1 Copyright 2009, Ford Global Technol
2、ogies, Inc. SILICONE REMOVER SK-M1B9550-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a silicone remover for the service repair area. 2. APPLICATION In general the material is used to remove silicone from substrates to be painted. 3. REQUIREMENTS 3.0 STANDARD
3、 REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 COMPOSITION Blend of alcohols and aliphatic hydro-carbons. 3.2 DENSITY 0.738 - 0.743 at 20 C (ASTM D 1298) 3.3 DISTILLATION R
4、ANGE 96 131 C (ASTM D 1078) 3.4 FLASH POINT below 0 C (ASTM D 56) 3.5 REFRACTIVE INDEX 1.4106 - 1.4114 (ASTM D 1218) 3.6 COLOR water white 3.7 TOXICITY The material shall conform to the safety regulations applicable to the plant and/or country where the material shall be used and has to be labeled accordingly if necessary. Further the material shall not have an obnoxious or objectionable odor. 3.8 SHELF STABILITY Min 2 years as supplied in the closed original container.
