1、INCH-POUNDA-A-2532AMav 16,2002SUPERSEDINGA-A-2532January 15, 1987COMMERCIAL ITEM DESCRIPTIONBEVELS, SLIDING TThe General Services Administration has authorized the use of this Commercial ItemDescription by all federal agencies.1. SCOPE. This Commercial Item Description covers sliding T-bevels, used
2、by machinists andcarpenters for measuring and transferring angles in layout work.2. CLASSIFICATION. The sliding T- bevels shall conform to the following types2.1 ljg. Wood handle.2.2 . PIastic handle3. SALIENT CHARACTERISTICS.3.1 Desi.m. The bevel shall consist of a blade and handle with a locking d
3、evice to hold the blade in anya71position relative to the handle.3.1.1 Twe I, handle. Handles shall be made of straight grained, hardwood, with a smooth finish, andtreated to prevent absorption of moisture. Handles shall be bound at each end by metal tips, which aresecurely fastened to the handle. T
4、he handles shall measure 5-9/16 inches (+/-1/8 inch) in length, 1 inch(+/-1/8 inch) in width, and 23/32 inch (+/-1/16 inch) thick.3.1.2 Tvpe 11.handle. Handles shall be made of rugged, one-piece plastic. The handles shall measure 5-9/1 6 inches (+/-1/8 inch) in length, 1 inch (+/-1/8 inch) in width,
5、 and 23/32 inch (+/-1/16 inch) thick.Sliding T-bevelBeneticiaI comments, recommendations, additions, deletions, clarifications, etc. and any other datawhich may improve this document should be sent to: General Services Administration, Federal SupplyService, Hardware SuperStore, 6FEE, 1500 Bannister
6、Rd., Bld.a# 6, Kansas City, Missouri. 64131.FSC 5210Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-2532A3.1,3 w Blades shall be of tool or stainless steel with a blued, chrome plate or polished finish. Bladesshall measure 8 inches (+/- 1/4 inch)
7、 in length, 1 inch (+/- 1/16 inch) in width, and .050 inch (+/- .005inch) thick. When tested blades shall have a minimum hardness of 90 on the Rockwell B scale inaccordance with ASTM E 18.3.1,4 Locking device. The T-bevel shall include a bolt and wing nut, thumbnut, or cam lock to hold theblade in a
8、ny desired position.3.2 Identification markin, The tool shall be marked with the manufacturers name or identifying symboland the state or country of manufacture, unless otherwise specified. All identification markings shall beetched, engraved, molded, or indented directly on the items surface in suc
9、h a manner that it remainsclearly legible throughout the life of the item;3.3 Workmanship. Details of workmanship shall be in accordance with the best commercial practices.Paints, coatings, plating, and finishes shall be smooth, adherent, continuous and not stained or discolored.External surfaces sh
10、all be free of tool and gouge marks, nicks, or other surface imperfections. The itemshall be free from manufacturing workmanship defects (e.g. sharp or rough external edges, comers, orsurfaces) and material workmanship defects (e.g. pits, rips, tins, burrs, tears, nodules, cracks, or blisters),which
11、 may adversely impact the items serviceability, durability, safety, or appearance4. REGULATORY REQUIREMENTS.4.1 Recovered materials. The supplier/mamrfacturer is encouraged to use recovered materials to themaximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Reg
12、ulation(FAR).4.2 Metric uroducts. Products manufactured to metric dimensions will be considered on an equal basiswith those manufactured using inch-pound units, provided the y fall within the tolerances specified (usingconversion tables contained in the latest revision of Federal Standard 376) and a
13、ll other requirements ofthis document are met. If a product is manufactured to metric dimensions and those dimensions exceedthe tolerances specified in the inch- pound units, a request should be made to the contracting officer todetermine if the product is acceptable.5. PRODUCT CONFORMANCE.5.1 Produ
14、ct Confomace. Theproducts provided shall meetthe sdientchmactenstics of thisCommercial Item Description, conform to the suppliers own drawings, specifications, standards andquality assurance practices, and the same product and offered for sale in the commercial market. Thegovernment reserves the rig
15、ht to require proof of such conformance.5.2 Responsibility for inspection. Unless otherwise specified, the supplier is responsible for theperformance of all inspection requirements and may use any commercial facilities (inch.rding thesuppliers own facilities) suitable for performance of the inspecti
16、on requirements, unless disapproved bythe Government. The Government reserves the right to perform any inspections deemed necessary toassure the item conforms to the specified requirements.6. PACKAGING. Requirements of preservation, packing, packaging, and marking of packages shall beas specified in
17、 the contract or order.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-2532A7. NOTES.(This section contains information of a general or explanatory nature that is not mandatory.)7.1 Addresses for obtaining copies of referenced documents:Federal A
18、cquisition Regulation (FAR): Government Printing Ot%ce, Superintendent of Documents,Washington, DC 20401-9371GSA Specification Section (3FP-E), Suite 8100,470 LEnfant Plaza, SW, Washington, DC, 20407.American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA,1942
19、8-2959:7.2 National Stock Numbers (NSNS). The following NSN corresponds to the styles specified in this CIDThis NSN may not be indicative of all possible NSNS associated with this CID. TJJLc5210-00-278-0645 II7.3 Orderiruz data. Purchasers should select the preferred options permitted herein and sho
20、uld include thefollowing information in procurement documents:(a) Title, number, and date of Commercial Item Description.(b) The type.(b) When applicable, the appropriate NSN.7.4 Key words. Sliding T-bevel,MILITARY INTERESTS:NONE: DoD has no registered interestin revisions and amendments to thisCommercial Description until furtherPreparing Activity:GSA - FSSnotice.3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
