JUS B B8 089-1985 Calcium carbonate pigments Calcium carbonate for use in paper industry Determination of abrasivity by Breunig《碳酸钙颜料，碳酸钙用于造纸业，通过布洛因尼希（Breunig）测定耐磨性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 14398-3-2003 en Cryogenic vessels Large transportable non-vacuum insulated vessels Part 3 Operational requirements (Incorporates Amendment A1 2005)《低温容器 大型运输非真空保温容器 第3部分 操作要求 包含.pdf

EN 14399-1-2005 5898 High-strength structural bolting assemblies for preloading - Part 1 General requirements《预加负荷用高强度结构螺栓组件 第1部分 一般要求》.pdf

EN 14399-1-2015 en High-strength structural bolting assemblies for preloading - Part 1 General requirements《预加载的高强度结构螺栓装配 第1部分 基本要求》.pdf

EN 14399-10-2009 en High-strength structural bolting assemblies for preloading - Part 10 System HRC - Bolt and nut assemblies with calibrated preload《预载用高强度结构螺栓组件 第10部分 系统HRC 带测定预载.pdf

EN 14399-10-2018 en High-strength structural bolting assemblies for preloading - Part 10 System HRC - Bolt and nut assemblies with calibrated preload.pdf

EN 14399-2-2015 en High-strength structural bolting assemblies for preloading - Part 2 Suitability for preloading《预加载的高强度结构螺栓装配 第2部分 预加载的适应性》.pdf

EN 14399-3-2015 en High-strength structural bolting assemblies for preloading - Part 3 System HR - Hexagon bolt and nut assemblies《预加载的高强度结构螺栓装配 第3部分 系统洛氏硬度 六角形螺栓和螺母》.pdf

EN 14399-4-2015 en High-strength structural bolting assemblies for preloading - Part 4 System HV - Hexagon bolt and nut assemblies《预加载的高强度结构螺栓装配 第4部分 系统维式硬度 六角形螺栓和螺母》.pdf

EN 14399-5-2015 en High-strength structural bolting assemblies for preloading - Part 5 Plain washers《预加载的高强度结构螺栓装配 第5部分 平垫圈》.pdf