JUS B D1 331-1981 Ceramics ti les Glazed mosaiq ti les Technical requirements and testing《陶瓷砖 釉面锦砖的技术要求和试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS SR ISO 2380-2-1994 SCREWDRIVERS FOR SLOTTED-HEAD SCREWS Part 2 General requirements lengts of blades and marking of hand operated screwdrivers《狭槽头螺钉的螺丝刀．第二部：一般要求，刀片的长度和手工操作螺丝.pdf

STAS SR ISO 2382-5-1995 Information processing systems - Vocabulary -Part 05 Representation of data《信息处理系统．词汇．第5部分：数据表示》.pdf

STAS SR ISO 2398-1995 Industrial rubber hose for compressed air (up to 2 5 MPa)《压缩空气的工业用橡胶软管（高达2．5兆帕） 》.pdf

STAS SR ISO 2406-1995 Continuous mechanical handling equipment - Mobile and portable conveyors - Constructional specifications《连续机械装卸设备．可移动和便携式．施工规范 》.pdf

STAS SR ISO 2409-1995 Paints and varnishes - Cross-cut test《油漆和清漆．贯穿测试 》.pdf

STAS SR ISO 2417-1996 Leather Determination of absorbtion of water《皮革吸水性测试 》.pdf

STAS SR ISO 2419-1996 Leather - Conditioning of test pieces for physical tests《皮革．物理测试的测试部件条件作用 》.pdf

STAS SR ISO 2420-1996 Leather - Determination of apparent density《皮革．表观密度的测定 》.pdf

STAS SR ISO 2421-1972 Cylindricai abrasive sleeves - Designation - Dimensions - Tolerances《圆柱型磨料袖子．设计．尺寸．耐磨性 》.pdf