MSZ 15440-1971 《粉末盒的专业表述和检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1856-1997(2008) Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines《用于由普通试验机上获得数据的计算机化数据获得系统评估的标准指南》.pdf

ASTM E1856-2013 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines《评估用于采集万能试验机数据的计算机数据采集系统的标准指南》.pdf

ASTM E1857-1997(2004) Standard Guide for Selection of Cleaning Techniques for Masonry Concrete and Stucco Surfaces《砂浆、混凝土和拉毛粉刷面清洁技术选择的标准指南》.pdf

ASTM E1857-1997(2013)e1 Standard Guide for Selection of Cleaning Techniques for Masonry Concrete and Stucco Surfaces《砂浆 混凝土和拉毛粉刷面清洁技术选择的标准指南》.pdf

ASTM E1858-2003 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry《用差示扫描量热法测定烃类氧化感应时间的标准试验方法》.pdf

ASTM E1858-2008 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry《用差示扫描量热法测定烃类氧化感应时间的标准试验方法》.pdf

ASTM E1858-2008(2015)e1 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry《采用差示扫描量热法测定烃类氧化诱导时间的标准试验方法》.pdf

ASTM E1859 E1859M-2011 Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique《用变化移动技术测量轮胎和路面之间的摩擦系数的标准试验方法》.pdf

ASTM E1859 E1859M-2011(2015) Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique《采用可变滑动技术测量轮胎和路面之间摩擦系数的标准试验方法》.pdf