MSZ KGST 1717-1979 《起重机指挥塔的工业要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 13523-29-2017 en Coil coated metals - Test methods - Part 29 Resistance to environmental soiling (Dirt pick-up and striping)《卷材涂层金属-试验方法-第29部分 耐土壤环境(沾污物处理和带状处理法)》.pdf

EN 13523-3-2014 en Coil coated metals - Test methods - Part 3 Colour difference - Instrumental comparison《线圈包覆金属 测试方法 第3部分 色彩差异 仪器比较》.pdf

EN 13523-4-2014 en Coil coated metals - Test methods - Part 4 Pencil hardness《线圈包覆金属 测试方法 第4部分 铅笔硬度》.pdf

EN 13523-5-2014 en Coil coated metals - Test methods - Part 5 Resistance to rapid deformation (impact test)《线圈包覆金属 测试方法 第5部分 抵抗急速变形》.pdf

EN 13523-6-2002 en Coil Coated Metals - Test Methods - Part 6 Adhesion After Indentation (Cupping Test)《卷材覆层金属的试验方法 第6部分 刻压纹之后的粘结(杯形挤压试验)》.pdf

EN 13523-7-2014 en Coil coated metals - Test methods - Part 7 Resistance to cracking on bending (T-bend test)《线圈包覆金属 测试方法 第7部分 抵抗弯曲断裂》.pdf

EN 13523-8-2010 en Coil coated metals - Test methods - Part 8 Resistance to salt spray (fog)《卷材涂层金属的试验方法 第8部分 耐盐雾性》.pdf

EN 13523-8-2017 en Coil coated metals - Test methods - Part 8 Resistance to salt spray (fog).pdf

EN 13523-9-2014 en Coil coated metals - Test methods - Part 9 Resistance to water immersion《线圈包覆金属 测试方法 第9部分 抵抗水浸》.pdf