1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2014 by Navistar, Inc. APRIL 2014 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIFI
2、CATION) NUMBER: CEMS A-37 TITLE: Stainless and Heat Resisting Steels and Alloys CURRENT ISSUE DATE: APRIL 2014 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: APRIL 2013 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This spec
3、ification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits pr
4、ior to use. Change Notice: Made VOID. This specification is VOID, and has been replaced by MPAPS A-37. For questions, contact MaterialsEngineeringN VOID This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Supplie
5、rs are required to assume all patent liability. 2014 by Navistar, Inc. APRIL 2014 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIFICATION) NUMBER: CEMS A-37, APPX TITLE: Stainless and Heat Resisting Steels and Alloys - Appendix CURRENT ISSUE DATE: APRIL 2014 WRITTEN/REVIEWED BY
6、: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: APRIL 2012 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the sa
7、fety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. This specification is VOID, and has been replaced by MPAPS A-37 APPENDIX. For questions, contact MaterialsEngineeringN VOID
