1、 Errata NFPA 20 Standard for the Installation of Stationary Pumps for Fire Protection2019 Edition Reference: 4.15.6.1 and 4.15.6.2 Errata No: 20-19-1 The Technical Committee on Fire Pumps notes the following error in the 2019 edition of NFPA 20, Standard for the Installation of Stationary Pumps for
2、Fire Protection. Note: Prior to the printing of NFPA 20, this error was noted and incorporated into the standard at the time of issuance. 1. In 4.15.6.1 and 4.15.6.2, revise the cross references to read as follows: 4.15.6.1 The support of pipe and fittings shall comply with the requirements of Secti
3、ons 9.1 and 9.2Chapter 17 of NFPA 13. 4.15.6.2 The seismic protection, where applicable, of pipe and fittings shall comply with the requirements of Section 9.3Chapter 18 of NFPA 13. Issue Date: May 8, 2018 (Note: Electronic products and pamphlet reprints may have this errata incorporated. For current information about the NFPA Codes and Standards, including this errata, please see www.nfpa.org/docinfo) Copyright 2018 All Rights Reserved NATIONAL FIRE PROTECTION ASSOCIATION
