1、AEROSPACE MATERIAL SPECIFICATIONAMS3898/1 REV. BIssued 1975-06Revised 1994-02Reaffirmed 2014-08Superseding AMS3898/1AInterleaf Carrier Material, Composite TapeParchment, 0.004 inch (0.10 mm), UnperforatedRATIONALEAMS3898/1B has been reaffirmed to comply with the SAE five year review policy._SAE Tech
2、nical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is t
3、he sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2014 SAE InternationalAll rights reserved. No part of this publication ma
4、y be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (outside USA)
5、Fax: 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS3898/1B1. SCOPE:1.1 Form:This specification covers one type of parchment in the form of rolls ofshe
6、eting or reels of unperforated tape of the width specified.2 APPLICAB DOCUMENTSSee AMS 3898.3 TECHNICAL REQUIREMENT3.1 Basic Specification:The complete requirements for procuring the product described herein shallconsist of this document and the latest issue of the basic specification,AMS 3898.3.2 M
7、aterial:The carrier material shall be a parchment type of paper which has beensulfuric-acid-treated, neutralized, and coated with a silicone release agent.3.2.1 Thickness: Shall be 0.0040 inch 0.0005 (0.102 mm 0.013).3.2.2 Width: Shall be as ordered.SAE INTERNATIONAL AMS3898/1B Page 2 of 2 3.3 Prope
8、rties:Shall be as follows:TABLE 1 PropertiesParagraph Property3.3.1 Tensile Strength, minimumRequirement25 pounds forceper inch(4.38 kN/m) of widthTest MethodASTM D 882,Method A3.3.2 Tear Strength, minimum ASTM D 827-714 QUALITY ASSURANCE PROVISIONSee AMS 3898.5. PREPARATION FOR DELIVERY:See AMS 3898.6. ACKNOWLEDGMENT:See AMS 3898.7. REJECTIONS:See AMS 3898.8. NOTES:See AMS 3898.2.8 ounce force(778mN)
