SANS 13909-8-2001 Hard coal and coke - Mechanical sampling Part 8 Methods of testing for bias《硬煤和焦炭 机械取样 第8部分：偏差试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5490-1993(2002) Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information《地下水流型模拟与现场信息比较的标准导则》.pdf

ASTM D5490-1993(2008) Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information《地下水流型模拟与现场信息比较的标准指南》.pdf

ASTM D5490-1993(2014)e1 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information《地下水流型模拟与现场信息比较的标准指南》.pdf

ASTM D5491-2003 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials《模塑和挤制材料用再生聚乙烯薄膜原料的标准分类》.pdf

ASTM D5491-2008 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials《模塑和挤塑材料用循环再生聚乙烯薄膜来源的标准分类》.pdf

ASTM D5491-2008(2014) Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials《模塑和挤塑材料用循环再生聚乙烯薄膜来源的标准分类》.pdf

ASTM D5492-2006 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics《丙烯塑料中二甲苯可溶物标准试验方法》.pdf

ASTM D5492-2010 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics《丙烯塑料中的二甲苯溶解物测定的标准试验方法》.pdf

ASTM D5492-2017 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics《测定丙烯类塑料二甲苯溶解度的标准试验方法》.pdf