SIS SS-EN 27 787-1-1990 Dentistry Dental rotary instruments Cutters Part 1 Steel laborator cutters (ISO 7787-1 1984)《牙科 牙科旋转仪器 刀具 第1部分：钢质试验仪 切割机（ISO 7787-1-1984）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 20957.2-2007 精密加工中心检验条件 第2部分：立式或带垂直主回转轴的万能主轴头机床几何精度检验(垂直Z轴).pdf

GB T 20957.4-2007 精密加工中心检验条件 第4部分：线性和回转轴线的定位精度和重复定位精度检验.pdf

GB T 20957.5-2007 精密加工中心检验条件 第5部分：工件夹持托板的定位精度和重复定位精度检验.pdf

GB T 20957.7-2007 精密加工中心检验条件 第7部分：精加工试件精度检验.pdf

GB T 20958.1-2007 数控床身铣床检验条件 精度检验 第1部分 卧式铣床.pdf

GB T 20958.2-2007 数控床身铣床检验条件 精度检验 第2部分 立式铣床.pdf

GB T 20959-2007 数控立式转塔刀架.pdf

GB T 20960-2007 数控卧式转塔刀架.pdf

GB T 20961-2007 单绳缠绕式矿井提升机.pdf